DFU Failure updated from SDK14.1 to SDK17

[Dave_couling]

I'm trying to update my devices from SDK 14.1 to SDK17.  I've followed the pc-util instructions to create an SD+BOOT package, then after I'll send the updated application.  Below is my DFU Package script

nrfutil settings generate --family NRF52 --application-version 1 --bootloader-version 1 --bl-settings-version 1 bootloader_settings.hex

nrfutil pkg generate --hw-version 2 --key-file legacy_dfu_private.pem --sd-req 0x9D --softdevice s132_nrf52_7.2.0_softdevice.hex --bootloader-version 2 --bootloader new_bootloader_nrf52832_xxaa_s132.hex  SD_BOOT_Package.zip

One note is even though I'm using PC_Util 6.1.0,  I wouldn't recognize the --sd-id command.  So its omitted

When I try to update my device with the above generated DFU .zip package I get the following error 

[Amanda Hsieh]

Hi, 

Are you updating from s132_nrf52_5.0.0 to s132_nrf52_7.2.0? If so, see DFU package combinations:

However, the two SDs may have different IDs. The first update requires --sd-req to be set to the ID of the old SD. The APP update requires the ID of the new SD. The new ID must be set using --sd-id parameter. 

 

nrfutil pkg generate --hw-version 2 --key-file legacy_dfu_private.pem --sd-req 0x9D --softdevice s132_nrf52_7.2.0_softdevice.hex --bootloader-version 2 --bootloader new_bootloader_nrf52832_xxaa_s132.hex  SD_BOOT_Package.zip

Try to add --sd-id 0x0101. 

Regards,
Amanda

[Dave_couling]

Yes I am trying to update the S132v5 to S132 V7

I've tried the --sd-id command, however nrfutil rejects this command with the following error: Error: no such option: --sd-id

I'm using nrfutil  version: 6.1.0

[Amanda Hsieh]

Hi,

Dave_couling said:

I've tried the --sd-id command, however nrfutil rejects this command with the following error: Error: no such option: --sd-id

Can you post the command?

-Amanda

[Dave_couling]

nrfutil pkg generate --hw-version 2 --key-file "dfu_private.pem" -application-version 2 "C:\Application_Firmware\custom_board\s132\armgcc\_build\nrf52832_xxaa.hex" --sd-req 0x9D --sd-id 0x0101 --softdevice "C:\SDK_17\components\softdevice\s132\hex\s132_nrf52_7.2.0_softdevice.hex" --bootloader-version 2 --bootloader "C:\Bootloader_Firmware\s132_ble\armgcc\_build\nrf52832_xxaa_s132.hex" SD_APP_BOOT_Package.zip

[Amanda Hsieh]

Hi, 

Try this:

nrfutil pkg generate --hw-version 52 --key-file dfu_private.pem --application-version 2 --application "C:\Application_Firmware\custom_board\s132\armgcc\_build\nrf52832_xxaa.hex" --sd-req 0x9D --sd-id 0x0101 --softdevice "C:\SDK_17\components\softdevice\s132\hex\s132_nrf52_7.2.0_softdevice.hex" --bootloader-version 2 --bootloader "C:\Bootloader_Firmware\s132_ble\armgcc\_build\nrf52832_xxaa_s132.hex" SD_APP_BOOT_Package.zip

-Amanda

[Dave_couling]

Thanks for the reply, but I get the same error.  Error: no such option: --sd-id

[Dave_couling]

Re-installing Python 3.7 seemed to fix this particular error.  However when I try and upload the *.zip file I get the error shown in my original post.  Any ideas?

[Amanda Hsieh]

Hi, 

Good to know you fix the command issue. 

Do you use "--hw-version 52" in the command? In your last command, I see the hw version config is wrong. 

-Amanda

[Dave_couling]

Yes I used the --hw-version 52 as your instructed.  However I still get the same error as seen in my original post