Measuring execution time with timing.h

[ALAV]

Hi, there i want to measure code execution time of a function. I came across https://docs.zephyrproject.org/latest/reference/timing_functions/index.html. I have enabled CONFIG_TIMING_FUNCTIONS on my prj.conf file. However the build cannot link to the timing functions. I get undefined references to both board_timing functions and soc_timing functions. How can i fix this. Additionally is there a better way to measure code execution time ?

[azwawe]

anybidy got the answer? I also trrying to use this function but got error undefined references to timer function.

For example

 

C:\nrf\example\button\src\main.c:21: undefined reference to `soc_timing_init'

 

I already add some c++ in configuration files.

Below is my configuration files.

# Include C++ Support
CONFIG_CPLUSPLUS=y

#include std c/c++, do not remove else standard design patterns will not work
CONFIG_NEWLIB_LIBC=y
CONFIG_LIB_CPLUSPLUS=y

# Log
CONFIG_LOG=y
CONFIG_LOG_PRINTK=y
CONFIG_LOG_MODE_DEFERRED=y
CONFIG_USE_SEGGER_RTT=y
CONFIG_RTT_CONSOLE=y
CONFIG_LOG_BACKEND_UART=y

# Timer
CONFIG_TIMING_FUNCTIONS=y

# GPIO
CONFIG_GPIO=y

Anybody have solution for this? thanks.

[haakonsh]

Have you included timing.h in your source file?
#include <zephyr/timing/timing.h>

Have you enabled the Zephyr subsystem timing library?

soc_timing_init is defined in zephyr/soc/arm/nordic_nrf/timing.c, which is included by zephyr/soc/arm/nordic_nrf/CMakeLists.txt:

if(CONFIG_SOC_HAS_TIMING_FUNCTIONS AND NOT CONFIG_BOARD_HAS_TIMING_FUNCTIONS)
  if(CONFIG_TIMING_FUNCTIONS)
    # Use nRF-specific timing calculations only if DWT is not present
    if(NOT CONFIG_CORTEX_M_DWT)
      zephyr_library_sources(timing.c)
    endif()
  endif()
endif()

Verify the dependencies listed above.

[BIA_JHLL]

Yes. Of course. Finally I got the compilation right. I saw in zephyr website than I have to use: “timing_init()” instead of “soc_timing_init()”. 
But now I have a question if can solve it. When I use the function “timing_cycles_to_ns(total_cycles)” I always have the same value which is 240. 
In the previous step I coded this: “total_cycles = timing_cycles_get(&start_time, &end_time);” and the result is correctly calculated and consistent

[haakonsh]

Can you share build/zephyr/.config? 

Can you share a code snippet of your timing code? 

[BIA_JHLL]

prj.config:

CONFIG_BT=y
CONFIG_BT_DEBUG_LOG=y
CONFIG_BT_CENTRAL=y
CONFIG_BT_PRIVACY=y
CONFIG_BT_SCAN_WITH_IDENTITY=y

CONFIG_BT_CTLR_TX_PWR_PLUS_3=y

CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_UUID_CNT=1

CONFIG_BT_BROADCASTER=y
CONFIG_BT_OBSERVER=y

CONFIG_BT_EXT_ADV=y
CONFIG_BT_CTLR_ADV_EXT=y
CONFIG_BT_CTLR_PHY_CODED=y
CONFIG_BT_USER_PHY_UPDATE=y

CONFIG_CONSOLE_HANDLER=y

CONFIG_BT_EXT_ADV_MAX_ADV_SET=2

CONFIG_TINYCRYPT=y
CONFIG_TINYCRYPT_SHA256=y
CONFIG_TINYCRYPT_ECC_DSA=y

CONFIG_ENTROPY_GENERATOR=y
CONFIG_STDOUT_CONSOLE=y
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR=y

#
# C Library
#
CONFIG_NEWLIB_LIBC=y
CONFIG_TIMING_FUNCTIONS=y
# end of C Library

#Timer functions
#CONFIG_SOC_HAS_TIMING_FUNCTIONS=y
#CONFIG_SOC_SERIES_NRF53X=y
#CONFIG_SOC_COMPATIBLE_NRF=y

main (source file):

// Timers
timing_t start_time1, end_time1;
uint64_t total_cycles;
uint64_t total_ns;

timing_init();
timing_start();

start_time1 = timing_counter_get();

// code_execution_to_be_measured();

 
 sign_message_rsa(); //Encrypted RSA
 bt_le_ext_adv_set_data(adv, buffer, ARRAY_SIZE(buffer), NULL, 0);
 end_time1 = timing_counter_get();
 total_cycles = timing_cycles_get(&start_time1, &end_time1);
 total_ns = timing_cycles_to_ns(total_cycles);

 timing_stop();
 
 printk("#;%d;1;%x\n",_rssi,time_stamp);

[haakonsh]

I need the generated build/zephyr/.config, not prj.conf. 

PS:
How are you reading out the values of total_cycles and total_ns ?

[BIA_JHLL]

I send you the file of ".config" in file build/zephyr/.config

CONFIG_GPIO=y
# CONFIG_SPI is not set
# CONFIG_I2C is not set
# CONFIG_KSCAN is not set
# CONFIG_WIFI is not set
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME=""
# CONFIG_MODEM is not set
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO_NRF_P1=y
CONFIG_BT_HCI_ACL_FLOW_CONTROL=y
CONFIG_BT_HCI_VS_EXT=y
CONFIG_BOARD="nrf5340dk_nrf5340_cpuapp"
CONFIG_FLASH_LOAD_SIZE=0
CONFIG_SRAM_SIZE=448
CONFIG_FLASH_LOAD_OFFSET=0
CONFIG_SOC="nRF5340_CPUAPP_QKAA"
CONFIG_SOC_SERIES="nrf53"
CONFIG_NUM_IRQS=69
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768
CONFIG_HEAP_MEM_POOL_SIZE=4096
CONFIG_ROM_START_OFFSET=0
# CONFIG_WATCHDOG is not set
# CONFIG_UART_NS16550 is not set
CONFIG_PM=y
# CONFIG_PM_DEVICE is not set
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
# CONFIG_CORTEX_M_SYSTICK is not set
CONFIG_CLOCK_CONTROL=y
CONFIG_NRF_RTC_TIMER=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768
CONFIG_BUILD_OUTPUT_HEX=y
# CONFIG_FPU is not set
CONFIG_FLASH_SIZE=1024
CONFIG_FLASH_BASE_ADDRESS=0x0
# CONFIG_GPIO_MCUX is not set
# CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
CONFIG_TINYCRYPT=y
CONFIG_SERIAL=y
# CONFIG_UART_PL011 is not set
# CONFIG_SRAM_VECTOR_TABLE is not set
# CONFIG_IPM_STM32_IPCC is not set

#
# Modules
#

#
# Available modules.
#

#
# nrf (C:ncsv1.7.0nrf)
#

#
# Nordic nRF Connect
#
CONFIG_MBEDTLS_LIBRARY_NRF_SECURITY=y
CONFIG_MAIN_STACK_SIZE=8192
CONFIG_PRIVILEGED_STACK_SIZE=1024
CONFIG_ENTROPY_GENERATOR=y
# CONFIG_NCS_SAMPLES_DEFAULTS is not set
CONFIG_LOG_DEFAULT_LEVEL=3

#
# Bootloader
#
# CONFIG_BUILD_S1_VARIANT is not set
# CONFIG_SECURE_BOOT is not set
CONFIG_PM_PARTITION_SIZE_PROVISION=0x280
# CONFIG_B0_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x8000
# CONFIG_SECURE_BOOT_CRYPTO is not set

#
# Secure Boot firmware validation
#
CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
CONFIG_SB_VALIDATION_INFO_VERSION=2
CONFIG_SB_VALIDATION_METADATA_OFFSET=0
CONFIG_SB_VALIDATE_FW_SIGNATURE=y
# end of Secure Boot firmware validation
# end of Bootloader

#
# Bluetooth Low Energy
#
CONFIG_BT_MAX_CONN=1
CONFIG_BT_HCI_TX_STACK_SIZE=1024
CONFIG_BT_RX_STACK_SIZE=1024
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024

#
# BLE Libraries
#
# CONFIG_BT_GATT_POOL is not set
# CONFIG_BT_GATT_DM is not set
CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_NAME_MAX_LEN=32
CONFIG_BT_SCAN_SHORT_NAME_MAX_LEN=32
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_MANUFACTURER_DATA_MAX_LEN=32
CONFIG_BT_SCAN_UUID_CNT=1
CONFIG_BT_SCAN_NAME_CNT=0
CONFIG_BT_SCAN_SHORT_NAME_CNT=0
CONFIG_BT_SCAN_ADDRESS_CNT=0
CONFIG_BT_SCAN_APPEARANCE_CNT=0
CONFIG_BT_SCAN_MANUFACTURER_DATA_CNT=0
# CONFIG_BT_SCAN_CONN_ATTEMPTS_FILTER is not set
# CONFIG_BT_SCAN_BLOCKLIST is not set
# CONFIG_BT_SCAN_LOG_LEVEL_OFF is not set
# CONFIG_BT_SCAN_LOG_LEVEL_ERR is not set
# CONFIG_BT_SCAN_LOG_LEVEL_WRN is not set
CONFIG_BT_SCAN_LOG_LEVEL_INF=y
# CONFIG_BT_SCAN_LOG_LEVEL_DBG is not set
CONFIG_BT_SCAN_LOG_LEVEL=3
# CONFIG_BT_CONN_CTX is not set

#
# Bluetooth Services
#
# CONFIG_BT_ANCS_CLIENT is not set
# CONFIG_BT_BAS_CLIENT is not set
# CONFIG_BT_BMS is not set
# CONFIG_BT_CTS_CLIENT is not set
# CONFIG_BT_DFU_SMP is not set
# CONFIG_BT_GATTP is not set
# CONFIG_BT_HIDS is not set
# CONFIG_BT_HOGP is not set
# CONFIG_BT_LBS is not set
# CONFIG_BT_NUS is not set
# CONFIG_BT_NUS_CLIENT is not set
# CONFIG_BT_RSCS is not set
# CONFIG_BT_THROUGHPUT is not set
# CONFIG_BT_LATENCY is not set
# CONFIG_BT_LATENCY_CLIENT is not set
# CONFIG_BT_ALEXA_GADGETS is not set
# CONFIG_BT_ALEXA_GADGETS_PROFILE is not set
# end of Bluetooth Services

#
# BLE over nRF RPC
#
# CONFIG_BT_CTLR is not set
# end of BLE over nRF RPC
# end of Bluetooth Low Energy

#
# DFU
#

#
# DFU
#
# CONFIG_DFU_TARGET is not set
# end of DFU

CONFIG_MBEDTLS_HEAP_SIZE=16384
# end of DFU

# CONFIG_ESB is not set

#
# Peripheral CPU DFU (PCD)
#
# CONFIG_PCD is not set
# CONFIG_PCD_APP is not set
# CONFIG_PCD_NET is not set
# end of Peripheral CPU DFU (PCD)

#
# Networking
#

#
# Application protocols
#
# CONFIG_NRF_CLOUD is not set
# CONFIG_DOWNLOAD_CLIENT is not set
# CONFIG_AWS_IOT is not set
# CONFIG_AWS_JOBS is not set
# CONFIG_AZURE_IOT_HUB is not set
# CONFIG_CLOUD_API is not set

#
# Self-Registration (Zi ZHu Ce)
#
# end of Self-Registration (Zi ZHu Ce)

# CONFIG_ICAL_PARSER is not set
# CONFIG_FTP_CLIENT is not set
# CONFIG_LWM2M_CLIENT_UTILS is not set
# end of Application protocols
# end of Networking

#
# NFC
#
# CONFIG_NFC_NDEF is not set
# CONFIG_NFC_NDEF_PARSER is not set
# CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
# CONFIG_NFC_T2T_PARSER is not set
# CONFIG_NFC_T4T_NDEF_FILE is not set
# CONFIG_NFC_T4T_ISODEP is not set
# CONFIG_NFC_T4T_APDU is not set
# CONFIG_NFC_T4T_CC_FILE is not set
# CONFIG_NFC_T4T_HL_PROCEDURE is not set
# CONFIG_NFC_PLATFORM is not set
# CONFIG_NFC_TNEP_TAG is not set
# CONFIG_NFC_TNEP_POLLER is not set
# CONFIG_NFC_TNEP_CH is not set
# end of NFC

# CONFIG_PROFILER is not set

#
# SPM
#
# CONFIG_SPM is not set
# CONFIG_IS_SPM is not set
# end of SPM

# CONFIG_FW_INFO is not set
# CONFIG_PPI_TRACE is not set
# CONFIG_CPU_LOAD is not set
# CONFIG_SHELL_BT_NUS is not set

#
# Nordic MPSL
#
# CONFIG_MPSL_CX_LOG_LEVEL_OFF is not set
# CONFIG_MPSL_CX_LOG_LEVEL_ERR is not set
# CONFIG_MPSL_CX_LOG_LEVEL_WRN is not set
CONFIG_MPSL_CX_LOG_LEVEL_INF=y
# CONFIG_MPSL_CX_LOG_LEVEL_DBG is not set
CONFIG_MPSL_CX_LOG_LEVEL=3
# CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_OFF is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_ERR is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_WRN is not set
CONFIG_MPSL_FEM_LOG_LEVEL_INF=y
# CONFIG_MPSL_FEM_LOG_LEVEL_DBG is not set
CONFIG_MPSL_FEM_LOG_LEVEL=3
CONFIG_MPSL_THREAD_COOP_PRIO=8
CONFIG_MPSL_SIGNAL_STACK_SIZE=1024
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_MPSL_ASSERT_HANDLER is not set
# CONFIG_MPSL_LOG_LEVEL_OFF is not set
# CONFIG_MPSL_LOG_LEVEL_ERR is not set
# CONFIG_MPSL_LOG_LEVEL_WRN is not set
CONFIG_MPSL_LOG_LEVEL_INF=y
# CONFIG_MPSL_LOG_LEVEL_DBG is not set
CONFIG_MPSL_LOG_LEVEL=3
# end of Nordic MPSL

#
# Partition Manager
#
CONFIG_PARTITION_MANAGER_ENABLED=y
CONFIG_FLASH_MAP_CUSTOM=y
CONFIG_SRAM_BASE_ADDRESS=0x20000000

#
# Zephyr subsystem configurations
#
# end of Zephyr subsystem configurations

#
# Zephyr samples configurations
#
# CONFIG_HCI_RPMSG_BUILD_STRATEGY_SKIP_BUILD is not set
CONFIG_HCI_RPMSG_BUILD_STRATEGY_FROM_SOURCE=y
CONFIG_RPMSG_NRF53_SRAM_SIZE=0x10000
# end of Zephyr samples configurations

#
# NCS subsystem configurations
#

#
# NCS samples configurations
#
# end of NCS samples configurations

# CONFIG_PM_SINGLE_IMAGE is not set
# CONFIG_PM_EXTERNAL_FLASH is not set
CONFIG_PM_EXTERNAL_FLASH_DEV_NAME=""
CONFIG_PM_EXTERNAL_FLASH_SIZE=0
CONFIG_PM_EXTERNAL_FLASH_BASE=0
CONFIG_PM_SRAM_BASE=0x20000000
CONFIG_PM_SRAM_SIZE=0x80000
# end of Partition Manager

#
# nRF RPC (Remote Procedure Call) library
#
# end of nRF RPC (Remote Procedure Call) library

# CONFIG_ZIGBEE is not set

#
# Full Modem Firmware Update Management(FMFU)
#
# CONFIG_MGMT_FMFU_LOG_LEVEL_OFF is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_ERR is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_WRN is not set
CONFIG_MGMT_FMFU_LOG_LEVEL_INF=y
# CONFIG_MGMT_FMFU_LOG_LEVEL_DBG is not set
CONFIG_MGMT_FMFU_LOG_LEVEL=3
# end of Full Modem Firmware Update Management(FMFU)

# CONFIG_CAF is not set

#
# Nordic IEEE 802.15.4
#
# end of Nordic IEEE 802.15.4

CONFIG_BOOT_SIGNATURE_KEY_FILE=""
CONFIG_INIT_ARCH_HW_AT_BOOT=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
# CONFIG_CDDL_GEN is not set

#
# Libraries
#
# CONFIG_AGPS_LOG_LEVEL_OFF is not set
# CONFIG_AGPS_LOG_LEVEL_ERR is not set
# CONFIG_AGPS_LOG_LEVEL_WRN is not set
CONFIG_AGPS_LOG_LEVEL_INF=y
# CONFIG_AGPS_LOG_LEVEL_DBG is not set
CONFIG_AGPS_LOG_LEVEL=3

#
# Binary libraries
#
# end of Binary libraries

# CONFIG_NRF_MODEM_LIB is not set

#
# BSD library (deprecated)
#

#
# All the configs below are deprecated, please use NRF_MODEM_LIB equivalents instead
#
# CONFIG_BSD_LIBRARY is not set
# end of BSD library (deprecated)

# CONFIG_ADP536X is not set

#
# AT Command driver
#
# end of AT Command driver

# CONFIG_AT_MONITOR is not set
# CONFIG_LTE_LINK_CONTROL is not set
# CONFIG_FPROTECT is not set
CONFIG_NRF_SPU_FLASH_REGION_SIZE=0x4000
CONFIG_FPROTECT_BLOCK_SIZE=0x4000

#
# AT Host Library for nrf91
#
# end of AT Host Library for nrf91

# CONFIG_DK_LIBRARY is not set
# CONFIG_AT_CMD_PARSER is not set
# CONFIG_MODEM_INFO is not set
CONFIG_RESET_ON_FATAL_ERROR=y
# CONFIG_FATAL_ERROR_LOG_LEVEL_OFF is not set
# CONFIG_FATAL_ERROR_LOG_LEVEL_ERR is not set
# CONFIG_FATAL_ERROR_LOG_LEVEL_WRN is not set
CONFIG_FATAL_ERROR_LOG_LEVEL_INF=y
# CONFIG_FATAL_ERROR_LOG_LEVEL_DBG is not set
CONFIG_FATAL_ERROR_LOG_LEVEL=3
# CONFIG_SMS is not set
# CONFIG_SUPL_CLIENT_LIB is not set
# CONFIG_DATE_TIME is not set
# CONFIG_RAM_POWER_DOWN_LIBRARY is not set
# CONFIG_WAVE_GEN_LIB is not set
CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0
CONFIG_MBEDTLS_PROMPTLESS=y
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
# CONFIG_MODEM_JWT is not set
# end of Libraries

#
# Device Drivers
#
# CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
CONFIG_ENTROPY_CC3XX=y
CONFIG_HW_CC3XX=y
# CONFIG_ETH_RTT is not set
# CONFIG_SENSOR is not set

#
# GPS Drivers
#
# CONFIG_GPS_SIM is not set
# end of GPS Drivers

# CONFIG_NRF_SW_LPUART is not set
# CONFIG_FLASH is not set
# end of Device Drivers

#
# External libraries
#
# end of External libraries

# CONFIG_UNITY is not set
# end of Nordic nRF Connect

CONFIG_ZEPHYR_NRF_MODULE=y
# end of nrf (C:ncsv1.7.0nrf)

#
# mcuboot (C:ncsv1.7.0bootloadermcuboot)
#

#
# MCUboot
#
CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4
# end of MCUboot

CONFIG_ZEPHYR_MCUBOOT_MODULE=y
# end of mcuboot (C:ncsv1.7.0bootloadermcuboot)

#
# trusted-firmware-m (C:ncsv1.7.0modulesteetfm)
#
# CONFIG_TFM_MINIMAL is not set
CONFIG_MBEDTLS_SHA1_C=y
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_LIBRARY=y
CONFIG_MBEDTLS_X509_LIBRARY=y
CONFIG_MBEDTLS_ENABLE_HEAP=y
CONFIG_MBEDTLS_DHM_C=y
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_HMAC_DRBG_C=y
CONFIG_MBEDTLS_CIPHER_MODE_CBC=y
CONFIG_MBEDTLS_CIPHER_MODE_CTR=y
CONFIG_MBEDTLS_CMAC_C=y
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
CONFIG_MBEDTLS_CHACHA20_C=y
CONFIG_MBEDTLS_POLY1305_C=y
# CONFIG_MBEDTLS_PSA_CRYPTO_STORAGE_C is not set
# end of trusted-firmware-m (C:ncsv1.7.0modulesteetfm)

#
# cjson (C:ncsv1.7.0moduleslibcjson)
#
# CONFIG_CJSON_LIB is not set
CONFIG_ZEPHYR_CJSON_MODULE=y
# end of cjson (C:ncsv1.7.0moduleslibcjson)

#
# pelion-dm (C:ncsv1.7.0moduleslibpelion-dm)
#
CONFIG_MBEDTLS_CFG_FILE="nrf-config.h"
# CONFIG_NEWLIB_LIBC_FLOAT_PRINTF is not set
CONFIG_ZEPHYR_PELION_DM_MODULE=y
# end of pelion-dm (C:ncsv1.7.0moduleslibpelion-dm)

#
# cddl-gen (C:ncsv1.7.0moduleslibcddl-gen)
#
CONFIG_ZEPHYR_CDDL_GEN_MODULE=y
# end of cddl-gen (C:ncsv1.7.0moduleslibcddl-gen)

#
# memfault-firmware-sdk (C:ncsv1.7.0moduleslibmemfault-firmware-sdk)
#
# CONFIG_MEMFAULT is not set
CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
# end of memfault-firmware-sdk (C:ncsv1.7.0moduleslibmemfault-firmware-sdk)

#
# CANopenNode (C:ncsv1.7.0moduleslibcanopennode)
#
CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
# end of CANopenNode (C:ncsv1.7.0moduleslibcanopennode)

#
# hal_nordic (C:ncsv1.7.0moduleshalnordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
CONFIG_HAS_NORDIC_DRIVERS=y

#
# Nordic drivers
#
# CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
# CONFIG_NRF_802154_SER_HOST is not set
# end of Nordic drivers

CONFIG_HAS_NRFX=y

#
# nrfx drivers
#
CONFIG_NRFX_CLOCK=y
CONFIG_NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED=y
CONFIG_NRFX_DPPI=y
# CONFIG_NRFX_EGU is not set
# CONFIG_NRFX_EGU0 is not set
# CONFIG_NRFX_EGU1 is not set
# CONFIG_NRFX_EGU2 is not set
# CONFIG_NRFX_EGU3 is not set
# CONFIG_NRFX_EGU4 is not set
# CONFIG_NRFX_EGU5 is not set
CONFIG_NRFX_GPIOTE=y
# CONFIG_NRFX_I2S is not set
CONFIG_NRFX_IPC=y
# CONFIG_NRFX_NFCT is not set
# CONFIG_NRFX_NVMC is not set
# CONFIG_NRFX_PDM is not set
# CONFIG_NRFX_POWER is not set
# CONFIG_NRFX_PWM is not set
# CONFIG_NRFX_PWM0 is not set
# CONFIG_NRFX_PWM1 is not set
# CONFIG_NRFX_PWM2 is not set
# CONFIG_NRFX_PWM3 is not set
# CONFIG_NRFX_QDEC is not set
# CONFIG_NRFX_QSPI is not set
# CONFIG_NRFX_RTC is not set
# CONFIG_NRFX_RTC0 is not set
# CONFIG_NRFX_RTC1 is not set
# CONFIG_NRFX_SAADC is not set
# CONFIG_NRFX_SPIM is not set
# CONFIG_NRFX_SPIM0 is not set
# CONFIG_NRFX_SPIM1 is not set
# CONFIG_NRFX_SPIM2 is not set
# CONFIG_NRFX_SPIM3 is not set
# CONFIG_NRFX_SPIM4 is not set
# CONFIG_NRFX_SPIS is not set
# CONFIG_NRFX_SPIS0 is not set
# CONFIG_NRFX_SPIS1 is not set
# CONFIG_NRFX_SPIS2 is not set
# CONFIG_NRFX_SPIS3 is not set
# CONFIG_NRFX_SYSTICK is not set
# CONFIG_NRFX_TIMER is not set
# CONFIG_NRFX_TIMER0 is not set
# CONFIG_NRFX_TIMER1 is not set
# CONFIG_NRFX_TIMER2 is not set
# CONFIG_NRFX_TWIM is not set
# CONFIG_NRFX_TWIM0 is not set
# CONFIG_NRFX_TWIM1 is not set
# CONFIG_NRFX_TWIM2 is not set
# CONFIG_NRFX_TWIM3 is not set
# CONFIG_NRFX_TWIS is not set
# CONFIG_NRFX_TWIS0 is not set
# CONFIG_NRFX_TWIS1 is not set
# CONFIG_NRFX_TWIS2 is not set
# CONFIG_NRFX_TWIS3 is not set
# CONFIG_NRFX_UARTE is not set
# CONFIG_NRFX_UARTE0 is not set
# CONFIG_NRFX_UARTE1 is not set
# CONFIG_NRFX_UARTE2 is not set
# CONFIG_NRFX_UARTE3 is not set
# CONFIG_NRFX_USBD is not set
# CONFIG_NRFX_USBREG is not set
# CONFIG_NRFX_WDT is not set
# CONFIG_NRFX_WDT0 is not set
# CONFIG_NRFX_WDT1 is not set
# CONFIG_NRFX_PRS is not set
# CONFIG_NRFX_PRS_BOX_0 is not set
# CONFIG_NRFX_PRS_BOX_1 is not set
# CONFIG_NRFX_PRS_BOX_2 is not set
# CONFIG_NRFX_PRS_BOX_3 is not set
# CONFIG_NRFX_PRS_BOX_4 is not set
# end of nrfx drivers
# end of hal_nordic (C:ncsv1.7.0moduleshalnordic)

#
# loramac-node (C:ncsv1.7.0moduleslibloramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
# CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
# end of loramac-node (C:ncsv1.7.0moduleslibloramac-node)

#
# lz4 (C:ncsv1.7.0modulesliblz4)
#
CONFIG_ZEPHYR_LZ4_MODULE=y
# CONFIG_LZ4 is not set
# end of lz4 (C:ncsv1.7.0modulesliblz4)

#
# mbedtls (C:ncsv1.7.0modulescryptombedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y
CONFIG_MBEDTLS=y
# CONFIG_MBEDTLS_BUILTIN is not set
# CONFIG_MBEDTLS_LIBRARY is not set
# CONFIG_CUSTOM_MBEDTLS_CFG_FILE is not set
# CONFIG_MBEDTLS_SSL_ALPN is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
# CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED is not set
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
# CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED is not set
# CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED is not set
CONFIG_MBEDTLS_PK_WRITE_C=y
CONFIG_APP_LINK_WITH_MBEDTLS=y
# end of mbedtls (C:ncsv1.7.0modulescryptombedtls)

#
# nanopb (C:ncsv1.7.0moduleslibnanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (C:ncsv1.7.0moduleslibnanopb)

#
# TraceRecorder (C:ncsv1.7.0modulesdebugTraceRecorder)
#
CONFIG_ZEPHYR_TRACERECORDER_MODULE=y
# end of TraceRecorder (C:ncsv1.7.0modulesdebugTraceRecorder)

#
# nrfxlib (C:ncsv1.7.0nrfxlib)
#

#
# Nordic nrfxlib
#
CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
# CONFIG_NFC_T2T_NRFXLIB is not set
# CONFIG_NFC_T4T_NRFXLIB is not set

#
# Crypto libraries for nRF5x SOCs.
#
CONFIG_NRFXLIB_CRYPTO=y
CONFIG_CRYPTOCELL_CC312_USABLE=y
CONFIG_CRYPTOCELL_USABLE=y
# CONFIG_NRF_OBERON is not set
CONFIG_NRF_CC3XX_PLATFORM=y
# CONFIG_HW_CC3XX_INTERRUPT is not set
CONFIG_CC3XX_MUTEX_LOCK=y
# CONFIG_CC3XX_ATOMIC_LOCK is not set
# CONFIG_CC3XX_HW_MUTEX_LOCK is not set
# end of Crypto libraries for nRF5x SOCs.

#
# Nordic Security
#
CONFIG_NORDIC_SECURITY_BACKEND=y

#
# mbed TLS Configuration File
#
CONFIG_GENERATE_MBEDTLS_CFG_FILE=y
CONFIG_MBEDTLS_SSL_TLS_C=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
CONFIG_MBEDTLS_SSL_CLI_C=y
CONFIG_MBEDTLS_SSL_SRV_C=y
CONFIG_MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED=y

#
# mbed TLS memory configuration
#
# end of mbed TLS memory configuration

#
# Backend Selection
#
CONFIG_CC3XX_SINGLE_BACKEND=y
CONFIG_CC3XX_BACKEND=y
CONFIG_CC312_BACKEND=y
# CONFIG_OBERON_BACKEND is not set
# CONFIG_MBEDTLS_VANILLA_BACKEND is not set
CONFIG_NRF_SECURITY_ANY_BACKEND=y

#
# Configuration section
#
CONFIG_NRF_SECURITY_RNG=y
CONFIG_MBEDTLS_CTR_DRBG_C=y
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CIPHER_AES_256_ECB_C=y
CONFIG_MBEDTLS_CIPHER_AES_256_CBC_C=y
CONFIG_MBEDTLS_CIPHER_AES_256_CTR_C=y
CONFIG_MBEDTLS_CIPHER_AES_256_CCM_C=y
CONFIG_MBEDTLS_AES_ALT=y
CONFIG_CC3XX_MBEDTLS_AES_C=y
CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_ECB=y

#
# Cipher Selection
#
CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_CBC=y

#
# CBC cipher padding modes
#
CONFIG_MBEDTLS_CIPHER_PADDING_PKCS7=y
CONFIG_MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS=y
CONFIG_MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN=y
CONFIG_MBEDTLS_CIPHER_PADDING_ZEROS=y
# end of CBC cipher padding modes

CONFIG_CC3XX_MBEDTLS_CIPHER_MODE_CTR=y
CONFIG_MBEDTLS_AES_256_CMAC_C=y
CONFIG_MBEDTLS_CMAC_ALT=y
CONFIG_CC3XX_MBEDTLS_CMAC_C=y

#
# AEAD - Authenticated Encryption with Associated Data
#
CONFIG_MBEDTLS_CCM_ALT=y
CONFIG_CC3XX_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_ALT=y
CONFIG_CC3XX_MBEDTLS_GCM_C=y
CONFIG_MBEDTLS_CHACHA20_ALT=y
CONFIG_CC3XX_MBEDTLS_CHACHA20_C=y
CONFIG_MBEDTLS_POLY1305_ALT=y
CONFIG_CC3XX_MBEDTLS_POLY1305_C=y
CONFIG_MBEDTLS_CHACHAPOLY_C=y
CONFIG_MBEDTLS_CHACHAPOLY_ALT=y
CONFIG_CC3XX_MBEDTLS_CHACHAPOLY_C=y
# end of AEAD - Authenticated Encryption with Associated Data

CONFIG_MBEDTLS_DHM_ALT=y
CONFIG_CC3XX_MBEDTLS_DHM_C=y
CONFIG_MBEDTLS_ECP_ALT=y
CONFIG_CC3XX_MBEDTLS_ECP_C=y

#
# ECC Feature Selection
#
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDH_GEN_PUBLIC_ALT=y
CONFIG_MBEDTLS_ECDH_COMPUTE_SHARED_ALT=y
CONFIG_CC3XX_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
CONFIG_MBEDTLS_ECDSA_GENKEY_ALT=y
CONFIG_MBEDTLS_ECDSA_SIGN_ALT=y
CONFIG_MBEDTLS_ECDSA_VERIFY_ALT=y
CONFIG_CC3XX_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set

#
# ECC curves
#
# end of ECC curves

CONFIG_MBEDTLS_RSA_C=y
CONFIG_MBEDTLS_RSA_ALT=y
CONFIG_CC3XX_MBEDTLS_RSA_C=y

#
# RSA Encoding Selection
#
CONFIG_MBEDTLS_PKCS1_V15=y
CONFIG_MBEDTLS_PKCS1_V21=y

#
# SHA - Secure Hash Algorithm
#
CONFIG_MBEDTLS_MD5_C=y
CONFIG_MBEDTLS_SHA1_ALT=y
CONFIG_CC3XX_MBEDTLS_SHA1_C=y
CONFIG_MBEDTLS_SHA256_C=y
CONFIG_MBEDTLS_SHA256_ALT=y
CONFIG_CC3XX_MBEDTLS_SHA256_C=y
# end of SHA - Secure Hash Algorithm

CONFIG_APP_LINK_WITH_MBEDTLS_INCLUDES=y

#
# Advanced configuration section
#
CONFIG_NRF_SECURITY_ADVANCED=y

#
# Advanced mbed TLS settings
#
CONFIG_MBEDTLS_MPI_WINDOW_SIZE=6
CONFIG_MBEDTLS_MPI_MAX_SIZE=1024
CONFIG_MBEDTLS_ECP_MAX_BITS=521
CONFIG_MBEDTLS_ECP_WINDOW_SIZE=6
CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
CONFIG_MBEDTLS_SSL_CIPHERSUITES=""
CONFIG_MBEDTLS_PK_C=y
# CONFIG_MBEDTLS_SSL_RENEGOTIATION is not set
# CONFIG_MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE is not set
# CONFIG_MBEDTLS_SSL_DTLS_BADMAC_LIMIT is not set
# CONFIG_MBEDTLS_SSL_SESSION_TICKETS is not set
# CONFIG_MBEDTLS_SSL_SERVER_NAME_INDICATION is not set
# CONFIG_MBEDTLS_SSL_CACHE_C is not set
# CONFIG_MBEDTLS_SSL_TICKET_C is not set
# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
# CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID is not set
# CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE is not set
# CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE is not set
# CONFIG_MBEDTLS_X509_CRL_PARSE_C is not set
# CONFIG_MBEDTLS_X509_CSR_PARSE_C is not set
# CONFIG_MBEDTLS_X509_CREATE_C is not set
# CONFIG_MBEDTLS_X509_CSR_WRITE_C is not set
CONFIG_MBEDTLS_ENTROPY_MAX_SOURCES=1
CONFIG_MBEDTLS_PSA_CRYPTO_C=y

#
# PSA API support
#
# CONFIG_MBEDTLS_USE_PSA_CRYPTO is not set
# end of PSA API support
# end of Nordic Security

# CONFIG_BT_LL_SOFTDEVICE_VS_INCLUDE is not set
# CONFIG_BT_LL_SOFTDEVICE_DEFAULT is not set
# CONFIG_NRF_RPC is not set
CONFIG_NRF_802154_SOURCE_NRFXLIB=y
# end of Nordic nrfxlib

CONFIG_ZEPHYR_NRFXLIB_MODULE=y
# end of nrfxlib (C:ncsv1.7.0nrfxlib)

#
# connectedhomeip (C:ncsv1.7.0moduleslibmatter)
#
# CONFIG_CHIP is not set
# CONFIG_CHIP_NFC_COMMISSIONING is not set
CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
# end of connectedhomeip (C:ncsv1.7.0moduleslibmatter)

#
# Optional modules. Make sure they're installed, via the project manifest.
#
# CONFIG_CIVETWEB is not set
CONFIG_HAS_CMSIS_CORE=y
CONFIG_HAS_CMSIS_CORE_M=y
# CONFIG_CMSIS_DSP is not set
CONFIG_LIBMETAL=y
CONFIG_LIBMETAL_SRC_PATH="libmetal"
# CONFIG_HAS_MEC_HAL is not set
CONFIG_OPENAMP=y
CONFIG_OPENAMP_SRC_PATH="open-amp"
CONFIG_OPENAMP_MASTER=y
CONFIG_OPENAMP_SLAVE=y
# CONFIG_SOF is not set
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_TINYCBOR is not set
# CONFIG_TINYCRYPT_CTR_PRNG is not set
CONFIG_TINYCRYPT_SHA256=y
CONFIG_TINYCRYPT_SHA256_HMAC=y
CONFIG_TINYCRYPT_SHA256_HMAC_PRNG=y
# CONFIG_TINYCRYPT_ECC_DH is not set
CONFIG_TINYCRYPT_ECC_DSA=y
CONFIG_TINYCRYPT_AES=y
# CONFIG_TINYCRYPT_AES_CBC is not set
# CONFIG_TINYCRYPT_AES_CTR is not set
# CONFIG_TINYCRYPT_AES_CCM is not set
CONFIG_TINYCRYPT_AES_CMAC=y
# CONFIG_MCUBOOT_BOOTUTIL_LIB is not set

#
# Unavailable modules, please install those via the project manifest.
#
# end of Modules

CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP=y
# CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP_NS is not set

#
# Board Options
#
CONFIG_IPM_NRFX=y
CONFIG_RPMSG_SERVICE_DUAL_IPM_SUPPORT=y
CONFIG_IPM_MSG_CH_0_ENABLE=y
CONFIG_IPM_MSG_CH_1_ENABLE=y
CONFIG_RPMSG_SERVICE_IPM_TX_NAME="IPM_0"
CONFIG_RPMSG_SERVICE_IPM_RX_NAME="IPM_1"
CONFIG_IPM_MSG_CH_0_TX=y
# CONFIG_IPM_MSG_CH_0_RX is not set
# CONFIG_IPM_MSG_CH_1_TX is not set
CONFIG_IPM_MSG_CH_1_RX=y
CONFIG_BOARD_ENABLE_DCDC_APP=y
CONFIG_BOARD_ENABLE_DCDC_NET=y
CONFIG_BOARD_ENABLE_DCDC_HV=y
CONFIG_BT_HCI_VS=y
CONFIG_BOARD_ENABLE_CPUNET=y
CONFIG_DOMAIN_CPUNET_BOARD="nrf5340dk_nrf5340_cpunet"
# CONFIG_BT_ECC is not set
# end of Board Options

# CONFIG_SOC_SERIES_BEETLE is not set
# CONFIG_SOC_SERIES_ARM_DESIGNSTART is not set
# CONFIG_SOC_SERIES_MPS2 is not set
# CONFIG_SOC_SERIES_MPS3 is not set
# CONFIG_SOC_SERIES_MUSCA_B1 is not set
# CONFIG_SOC_SERIES_MUSCA_S1 is not set
# CONFIG_SOC_SERIES_SAMD20 is not set
# CONFIG_SOC_SERIES_SAMD21 is not set
# CONFIG_SOC_SERIES_SAMD51 is not set
# CONFIG_SOC_SERIES_SAME51 is not set
# CONFIG_SOC_SERIES_SAME53 is not set
# CONFIG_SOC_SERIES_SAME54 is not set
# CONFIG_SOC_SERIES_SAMR21 is not set
# CONFIG_SOC_SERIES_SAM3X is not set
# CONFIG_SOC_SERIES_SAM4E is not set
# CONFIG_SOC_SERIES_SAM4L is not set
# CONFIG_SOC_SERIES_SAM4S is not set
# CONFIG_SOC_SERIES_SAME70 is not set
# CONFIG_SOC_SERIES_SAMV71 is not set
# CONFIG_SOC_SERIES_VALKYRIE is not set
# CONFIG_SOC_SERIES_VIPER is not set
# CONFIG_SOC_SERIES_PSOC62 is not set
# CONFIG_SOC_SERIES_PSOC63 is not set
# CONFIG_SOC_SERIES_XMC_4XXX is not set
# CONFIG_SOC_SERIES_MEC1501X is not set
# CONFIG_SOC_SERIES_MEC1701X is not set
# CONFIG_SOC_SERIES_MEC172X is not set
# CONFIG_SOC_SERIES_NRF51X is not set
# CONFIG_SOC_SERIES_NRF52X is not set
CONFIG_SOC_SERIES_NRF53X=y
# CONFIG_SOC_SERIES_NRF91X is not set
# CONFIG_SOC_SERIES_M48X is not set
# CONFIG_SOC_SERIES_NPCX7 is not set
# CONFIG_SOC_SERIES_NPCX9 is not set
# CONFIG_SOC_SERIES_IMX_6X_M4 is not set
# CONFIG_SOC_SERIES_IMX7_M4 is not set
# CONFIG_SOC_SERIES_IMX8MM_M4 is not set
# CONFIG_SOC_SERIES_IMX_RT6XX is not set
# CONFIG_SOC_SERIES_IMX_RT is not set
# CONFIG_SOC_SERIES_KINETIS_K2X is not set
# CONFIG_SOC_SERIES_KINETIS_K6X is not set
# CONFIG_SOC_SERIES_KINETIS_K8X is not set
# CONFIG_SOC_SERIES_KINETIS_KE1XF is not set
# CONFIG_SOC_SERIES_KINETIS_KL2X is not set
# CONFIG_SOC_SERIES_KINETIS_KV5X is not set
# CONFIG_SOC_SERIES_KINETIS_KWX is not set
# CONFIG_SOC_SERIES_LPC11U6X is not set
# CONFIG_SOC_SERIES_LPC54XXX is not set
# CONFIG_SOC_SERIES_LPC55XXX is not set
# CONFIG_SOC_EOS_S3 is not set
# CONFIG_SOC_SERIES_RCAR_GEN3 is not set
# CONFIG_SOC_SERIES_EFM32GG11B is not set
# CONFIG_SOC_SERIES_EFM32HG is not set
# CONFIG_SOC_SERIES_EFM32JG12B is not set
# CONFIG_SOC_SERIES_EFM32PG12B is not set
# CONFIG_SOC_SERIES_EFM32PG1B is not set
# CONFIG_SOC_SERIES_EFM32WG is not set
# CONFIG_SOC_SERIES_EFR32BG13P is not set
# CONFIG_SOC_SERIES_EFR32FG13P is not set
# CONFIG_SOC_SERIES_EFR32FG1P is not set
# CONFIG_SOC_SERIES_EFR32MG12P is not set
# CONFIG_SOC_SERIES_EFR32MG21 is not set
# CONFIG_SOC_SERIES_STM32F0X is not set
# CONFIG_SOC_SERIES_STM32F1X is not set
# CONFIG_SOC_SERIES_STM32F2X is not set
# CONFIG_SOC_SERIES_STM32F3X is not set
# CONFIG_SOC_SERIES_STM32F4X is not set
# CONFIG_SOC_SERIES_STM32F7X is not set
# CONFIG_SOC_SERIES_STM32G0X is not set
# CONFIG_SOC_SERIES_STM32G4X is not set
# CONFIG_SOC_SERIES_STM32H7X is not set
# CONFIG_SOC_SERIES_STM32L0X is not set
# CONFIG_SOC_SERIES_STM32L1X is not set
# CONFIG_SOC_SERIES_STM32L4X is not set
# CONFIG_SOC_SERIES_STM32L5X is not set
# CONFIG_SOC_SERIES_STM32MP1X is not set
# CONFIG_SOC_SERIES_STM32WBX is not set
# CONFIG_SOC_SERIES_STM32WLX is not set
# CONFIG_SOC_TI_LM3S6965 is not set
# CONFIG_SOC_SERIES_CC13X2_CC26X2 is not set
# CONFIG_SOC_SERIES_CC32XX is not set
# CONFIG_SOC_SERIES_MSP432P4XX is not set
# CONFIG_SOC_XILINX_ZYNQMP_RPU is not set

#
# Hardware Configuration
#
CONFIG_CPU_HAS_ARM_MPU=y
CONFIG_CPU_HAS_NRF_IDAU=y
CONFIG_NRF_SPU_RAM_REGION_SIZE=0x2000
CONFIG_HAS_SWO=y
CONFIG_SOC_FAMILY="nordic_nrf"
CONFIG_SOC_FAMILY_NRF=y
CONFIG_HAS_HW_NRF_CC312=y
CONFIG_HAS_HW_NRF_CLOCK=y
CONFIG_HAS_HW_NRF_DPPIC=y
CONFIG_HAS_HW_NRF_EGU0=y
CONFIG_HAS_HW_NRF_EGU1=y
CONFIG_HAS_HW_NRF_EGU2=y
CONFIG_HAS_HW_NRF_EGU3=y
CONFIG_HAS_HW_NRF_EGU4=y
CONFIG_HAS_HW_NRF_EGU5=y
CONFIG_HAS_HW_NRF_GPIO0=y
CONFIG_HAS_HW_NRF_GPIO1=y
CONFIG_HAS_HW_NRF_GPIOTE=y
CONFIG_HAS_HW_NRF_I2S=y
CONFIG_HAS_HW_NRF_IPC=y
CONFIG_HAS_HW_NRF_KMU=y
CONFIG_HAS_HW_NRF_NFCT=y
CONFIG_HAS_HW_NRF_NVMC_PE=y
CONFIG_HAS_HW_NRF_PDM=y
CONFIG_HAS_HW_NRF_POWER=y
CONFIG_HAS_HW_NRF_PWM0=y
CONFIG_HAS_HW_NRF_PWM1=y
CONFIG_HAS_HW_NRF_PWM2=y
CONFIG_HAS_HW_NRF_PWM3=y
CONFIG_HAS_HW_NRF_QDEC0=y
CONFIG_HAS_HW_NRF_QDEC1=y
CONFIG_HAS_HW_NRF_QSPI=y
CONFIG_HAS_HW_NRF_RTC0=y
CONFIG_HAS_HW_NRF_RTC1=y
CONFIG_HAS_HW_NRF_SAADC=y
CONFIG_HAS_HW_NRF_SPIM0=y
CONFIG_HAS_HW_NRF_SPIM1=y
CONFIG_HAS_HW_NRF_SPIM2=y
CONFIG_HAS_HW_NRF_SPIM3=y
CONFIG_HAS_HW_NRF_SPIM4=y
CONFIG_HAS_HW_NRF_SPIS0=y
CONFIG_HAS_HW_NRF_SPIS1=y
CONFIG_HAS_HW_NRF_SPIS2=y
CONFIG_HAS_HW_NRF_SPIS3=y
CONFIG_HAS_HW_NRF_SPU=y
CONFIG_HAS_HW_NRF_TIMER0=y
CONFIG_HAS_HW_NRF_TIMER1=y
CONFIG_HAS_HW_NRF_TIMER2=y
CONFIG_HAS_HW_NRF_TWIM0=y
CONFIG_HAS_HW_NRF_TWIM1=y
CONFIG_HAS_HW_NRF_TWIM2=y
CONFIG_HAS_HW_NRF_TWIM3=y
CONFIG_HAS_HW_NRF_TWIS0=y
CONFIG_HAS_HW_NRF_TWIS1=y
CONFIG_HAS_HW_NRF_TWIS2=y
CONFIG_HAS_HW_NRF_TWIS3=y
CONFIG_HAS_HW_NRF_UARTE0=y
CONFIG_HAS_HW_NRF_UARTE1=y
CONFIG_HAS_HW_NRF_UARTE2=y
CONFIG_HAS_HW_NRF_UARTE3=y
CONFIG_HAS_HW_NRF_USBD=y
CONFIG_HAS_HW_NRF_USBREG=y
CONFIG_HAS_HW_NRF_WDT0=y
CONFIG_HAS_HW_NRF_WDT1=y
CONFIG_NRF_HW_RTC1_RESERVED=y
CONFIG_SOC_NRF5340_CPUAPP=y
CONFIG_SOC_NRF5340_CPUAPP_QKAA=y
# CONFIG_SOC_NRF5340_CPUNET_QKAA is not set
CONFIG_SOC_DCDC_NRF53X_APP=y
CONFIG_SOC_DCDC_NRF53X_NET=y
CONFIG_SOC_DCDC_NRF53X_HV=y
CONFIG_SOC_ENABLE_LFXO=y
# CONFIG_SOC_LFXO_CAP_EXTERNAL is not set
# CONFIG_SOC_LFXO_CAP_INT_6PF is not set
CONFIG_SOC_LFXO_CAP_INT_7PF=y
# CONFIG_SOC_LFXO_CAP_INT_9PF is not set
CONFIG_SOC_HFXO_CAP_DEFAULT=y
# CONFIG_SOC_HFXO_CAP_EXTERNAL is not set
# CONFIG_SOC_HFXO_CAP_INTERNAL is not set
CONFIG_NRF_ENABLE_CACHE=y
# CONFIG_NFCT_PINS_AS_GPIOS is not set
# CONFIG_SOC_LOG_LEVEL_OFF is not set
# CONFIG_SOC_LOG_LEVEL_ERR is not set
# CONFIG_SOC_LOG_LEVEL_WRN is not set
CONFIG_SOC_LOG_LEVEL_INF=y
# CONFIG_SOC_LOG_LEVEL_DBG is not set
CONFIG_SOC_LOG_LEVEL=3
# end of Hardware Configuration

CONFIG_SOC_COMPATIBLE_NRF=y

#
# ARM Options
#
CONFIG_ARCH="arm"
CONFIG_CPU_CORTEX=y
# CONFIG_CODE_DATA_RELOCATION is not set
# CONFIG_CODE_DATA_RELOCATION_SRAM is not set
CONFIG_CPU_CORTEX_M=y
CONFIG_ISA_THUMB2=y
CONFIG_ASSEMBLER_ISA_THUMB2=y
CONFIG_COMPILER_ISA_THUMB2=y
CONFIG_STACK_ALIGN_DOUBLE_WORD=y
# CONFIG_RUNTIME_NMI is not set
CONFIG_PLATFORM_SPECIFIC_INIT=y
CONFIG_FAULT_DUMP=2
CONFIG_BUILTIN_STACK_GUARD=y
CONFIG_ARM_STACK_PROTECTION=y
CONFIG_CPU_CORTEX_M33=y
CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
CONFIG_CPU_CORTEX_M_HAS_DWT=y
CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
CONFIG_CPU_CORTEX_M_HAS_VTOR=y
CONFIG_CPU_CORTEX_M_HAS_SPLIM=y
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
CONFIG_CPU_CORTEX_M_HAS_CMSE=y
CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_SE=y
CONFIG_ARMV7_M_ARMV8_M_FP=y
CONFIG_ARMV8_M_DSP=y

#
# ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33 options
#
CONFIG_GEN_ISR_TABLES=y
# CONFIG_ZERO_LATENCY_IRQS is not set
# CONFIG_SW_VECTOR_RELAY is not set
CONFIG_CORTEX_M_DWT=y
CONFIG_TEST_EXTRA_STACKSIZE=0
# end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33 options

CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT is not set
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
CONFIG_ARM_TRUSTZONE_M=y
CONFIG_GEN_IRQ_VECTOR_TABLE=y
CONFIG_ARM_MPU=y
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
# CONFIG_MPU_STACK_GUARD is not set
# CONFIG_MPU_ALLOW_FLASH_WRITE is not set
# CONFIG_CUSTOM_SECTION_ALIGN is not set
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
# end of ARM Options

CONFIG_ARM=y
CONFIG_ARCH_IS_SET=y

#
# General Architecture Options
#
# CONFIG_ARCH_LOG_LEVEL_OFF is not set
# CONFIG_ARCH_LOG_LEVEL_ERR is not set
# CONFIG_ARCH_LOG_LEVEL_WRN is not set
CONFIG_ARCH_LOG_LEVEL_INF=y
# CONFIG_ARCH_LOG_LEVEL_DBG is not set
CONFIG_ARCH_LOG_LEVEL=3
# CONFIG_MPU_LOG_LEVEL_OFF is not set
# CONFIG_MPU_LOG_LEVEL_ERR is not set
# CONFIG_MPU_LOG_LEVEL_WRN is not set
CONFIG_MPU_LOG_LEVEL_INF=y
# CONFIG_MPU_LOG_LEVEL_DBG is not set
CONFIG_MPU_LOG_LEVEL=3
# CONFIG_TRUSTED_EXECUTION_SECURE is not set
# CONFIG_TRUSTED_EXECUTION_NONSECURE is not set
CONFIG_HW_STACK_PROTECTION=y
# CONFIG_USERSPACE is not set
CONFIG_KOBJECT_TEXT_AREA=256
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
CONFIG_GEN_PRIV_STACKS=y
# CONFIG_STACK_GROWS_UP is not set

#
# Interrupt Configuration
#
# CONFIG_DYNAMIC_INTERRUPTS is not set
CONFIG_GEN_SW_ISR_TABLE=y
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=0
CONFIG_GEN_IRQ_START_VECTOR=0
# CONFIG_EXTRA_EXCEPTION_INFO is not set
# end of Interrupt Configuration
# end of General Architecture Options

CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_HAS_TRUSTED_EXECUTION=y
CONFIG_ARCH_HAS_STACK_PROTECTION=y
CONFIG_ARCH_HAS_USERSPACE=y
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
CONFIG_ARCH_HAS_THREAD_ABORT=y
CONFIG_CPU_HAS_TEE=y
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_MPU=y
CONFIG_MPU=y
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS=y
CONFIG_MPU_GAP_FILLING=y
CONFIG_SRAM_REGION_PERMISSIONS=y

#
# Floating Point Options
#
# end of Floating Point Options

#
# Cache Options
#
# CONFIG_CACHE_MANAGEMENT is not set
# end of Cache Options

CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y

#
# General Kernel Options
#
# CONFIG_KERNEL_LOG_LEVEL_OFF is not set
# CONFIG_KERNEL_LOG_LEVEL_ERR is not set
# CONFIG_KERNEL_LOG_LEVEL_WRN is not set
CONFIG_KERNEL_LOG_LEVEL_INF=y
# CONFIG_KERNEL_LOG_LEVEL_DBG is not set
CONFIG_KERNEL_LOG_LEVEL=3
CONFIG_MULTITHREADING=y
CONFIG_NUM_COOP_PRIORITIES=16
CONFIG_NUM_PREEMPT_PRIORITIES=15
CONFIG_MAIN_THREAD_PRIORITY=0
CONFIG_COOP_ENABLED=y
CONFIG_PREEMPT_ENABLED=y
CONFIG_PRIORITY_CEILING=-127
CONFIG_NUM_METAIRQ_PRIORITIES=0
# CONFIG_SCHED_DEADLINE is not set
# CONFIG_SCHED_CPU_MASK is not set
CONFIG_IDLE_STACK_SIZE=320
CONFIG_ISR_STACK_SIZE=2048
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
CONFIG_ERRNO=y
CONFIG_SCHED_DUMB=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_DUMB=y

#
# Kernel Debugging and Metrics
#
# CONFIG_INIT_STACKS is not set
CONFIG_BOOT_BANNER=y
CONFIG_BOOT_DELAY=0
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# end of Kernel Debugging and Metrics

#
# Work Queue Options
#
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
# end of Work Queue Options

#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations

#
# Timer API Options
#
CONFIG_TIMESLICING=y
CONFIG_TIMESLICE_SIZE=0
CONFIG_TIMESLICE_PRIORITY=0
CONFIG_POLL=y
# end of Timer API Options

#
# Other Kernel Object Options
#
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
CONFIG_NUM_PIPE_ASYNC_MSGS=10
CONFIG_KERNEL_MEM_POOL=y
# end of Other Kernel Object Options

CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y
CONFIG_SWAP_NONATOMIC=y
CONFIG_SYS_CLOCK_EXISTS=y
CONFIG_TIMEOUT_64BIT=y
CONFIG_XIP=y

#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities

#
# Security Options
#
# CONFIG_STACK_CANARIES is not set
CONFIG_STACK_POINTER_RANDOM=0
# end of Security Options

#
# SMP Options
#
CONFIG_MP_NUM_CPUS=1
# end of SMP Options

CONFIG_TICKLESS_KERNEL=y
# end of General Kernel Options

CONFIG_HAS_DTS=y
CONFIG_HAS_DTS_GPIO=y

#
# Device Drivers
#

#
# Bluetooth Drivers
#

#
# Bluetooth HCI Driver Options
#
# CONFIG_BT_H4 is not set
# CONFIG_BT_H5 is not set
CONFIG_BT_RPMSG=y
# CONFIG_BT_STM32_IPM is not set
# CONFIG_BT_ESP32 is not set
# CONFIG_BT_NO_DRIVER is not set
CONFIG_BT_RPMSG_NRF53=y
# end of Bluetooth Drivers

# CONFIG_IEEE802154 is not set
# CONFIG_LORA is not set
CONFIG_UART_CONSOLE_ON_DEV_NAME="UART_0"
CONFIG_CONSOLE=y
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
CONFIG_CONSOLE_HAS_DRIVER=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_UART_CONSOLE=y
CONFIG_UART_CONSOLE_INIT_PRIORITY=60
# CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
# CONFIG_UART_CONSOLE_MCUMGR is not set
CONFIG_UART_CONSOLE_INPUT_EXPIRED=y
CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT=15000
# CONFIG_USB_UART_CONSOLE is not set
# CONFIG_RAM_CONSOLE is not set
# CONFIG_RTT_CONSOLE is not set
# CONFIG_IPM_CONSOLE_SENDER is not set
# CONFIG_IPM_CONSOLE_RECEIVER is not set
# CONFIG_IPM_CONSOLE is not set
# CONFIG_UART_PIPE is not set
# CONFIG_UART_MCUMGR is not set
# CONFIG_SEMIHOST_CONSOLE is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_OFF is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_ERR is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_WRN is not set
CONFIG_UART_CONSOLE_LOG_LEVEL_INF=y
# CONFIG_UART_CONSOLE_LOG_LEVEL_DBG is not set
CONFIG_UART_CONSOLE_LOG_LEVEL=3
# CONFIG_GSM_MUX is not set
CONFIG_HAS_SEGGER_RTT=y
CONFIG_USE_SEGGER_RTT=y
CONFIG_SEGGER_RTT_CUSTOM_LOCKING=y
CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS=3
CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS=3
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=15360
CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN=16
CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE=64
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_SKIP=y
# CONFIG_SEGGER_RTT_MODE_NO_BLOCK_TRIM is not set
# CONFIG_SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL is not set
CONFIG_SEGGER_RTT_MODE=0
# CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP is not set
CONFIG_SEGGER_RTT_SECTION_NONE=y
# CONFIG_SEGGER_RTT_SECTION_DTCM is not set
# CONFIG_EC_HOST_CMD_PERIPH is not set
# CONFIG_NET_LOOPBACK is not set

#
# Capabilities
#
CONFIG_SERIAL_HAS_DRIVER=y
CONFIG_SERIAL_SUPPORT_ASYNC=y
CONFIG_SERIAL_SUPPORT_INTERRUPT=y
CONFIG_UART_USE_RUNTIME_CONFIGURE=y
# CONFIG_UART_ASYNC_API is not set
# CONFIG_UART_LINE_CTRL is not set
# CONFIG_UART_DRV_CMD is not set

#
# Serial Drivers
#
CONFIG_UART_NRFX=y
CONFIG_UART_0_NRF_UARTE=y
CONFIG_UART_0_ENHANCED_POLL_OUT=y
CONFIG_UART_0_INTERRUPT_DRIVEN=y
# CONFIG_UART_0_NRF_PARITY_BIT is not set
CONFIG_UART_0_NRF_TX_BUFFER_SIZE=32
CONFIG_UART_ENHANCED_POLL_OUT=y
CONFIG_NRF_UARTE_PERIPHERAL=y
# CONFIG_UART_ALTERA_JTAG is not set
# CONFIG_UART_RTT is not set
# CONFIG_UART_XLNX_UARTLITE is not set

#
# Interrupt Controllers
#
# CONFIG_SWERV_PIC is not set
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
# end of Interrupt Controllers

#
# Timer Drivers
#
CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=0
# CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
# CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
CONFIG_SYSTEM_CLOCK_DISABLE=y
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
# end of Timer Drivers

CONFIG_ENTROPY_HAS_DRIVER=y
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_GPIO_LOG_LEVEL_OFF is not set
# CONFIG_GPIO_LOG_LEVEL_ERR is not set
# CONFIG_GPIO_LOG_LEVEL_WRN is not set
CONFIG_GPIO_LOG_LEVEL_INF=y
# CONFIG_GPIO_LOG_LEVEL_DBG is not set
CONFIG_GPIO_LOG_LEVEL=3
# CONFIG_GPIO_DW is not set
CONFIG_GPIO_NRFX=y
CONFIG_GPIO_NRF_INIT_PRIORITY=40
CONFIG_GPIO_NRF_P0=y
CONFIG_GPIO_NRF_INT_EDGE_USING_GPIOTE=y
# CONFIG_GPIO_NRF_INT_EDGE_USING_SENSE is not set
# CONFIG_GPIO_ITE_IT8XXX2 is not set
# CONFIG_GPIO_INTEL is not set
# CONFIG_GPIO_XLNX_AXI is not set
# CONFIG_GPIO_EMUL is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_SHARED_IRQ is not set
# CONFIG_I2S is not set
# CONFIG_PWM is not set
# CONFIG_PINMUX is not set
# CONFIG_ADC is not set
# CONFIG_DAC is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN is not set
CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF=y
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG is not set
CONFIG_CLOCK_CONTROL_LOG_LEVEL=3
CONFIG_CLOCK_CONTROL_NRF=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
# CONFIG_PTP_CLOCK is not set
CONFIG_IPM=y
# CONFIG_IPM_MHU is not set
# CONFIG_IPM_NRF_SINGLE_INSTANCE is not set

#
# IPM Message Channel [0] configuration
#
# end of IPM Message Channel [0] configuration

#
# IPM Message Channel [1] configuration
#
# end of IPM Message Channel [1] configuration

#
# IPM Message Channel [2] configuration
#
# CONFIG_IPM_MSG_CH_2_ENABLE is not set
# end of IPM Message Channel [2] configuration

#
# IPM Message Channel [3] configuration
#
# CONFIG_IPM_MSG_CH_3_ENABLE is not set
# end of IPM Message Channel [3] configuration

#
# IPM Message Channel [4] configuration
#
# CONFIG_IPM_MSG_CH_4_ENABLE is not set
# end of IPM Message Channel [4] configuration

#
# IPM Message Channel [5] configuration
#
# CONFIG_IPM_MSG_CH_5_ENABLE is not set
# end of IPM Message Channel [5] configuration

#
# IPM Message Channel [6] configuration
#
# CONFIG_IPM_MSG_CH_6_ENABLE is not set
# end of IPM Message Channel [6] configuration

#
# IPM Message Channel [7] configuration
#
# CONFIG_IPM_MSG_CH_7_ENABLE is not set
# end of IPM Message Channel [7] configuration

#
# IPM Message Channel [8] configuration
#
# CONFIG_IPM_MSG_CH_8_ENABLE is not set
# end of IPM Message Channel [8] configuration

#
# IPM Message Channel [9] configuration
#
# CONFIG_IPM_MSG_CH_9_ENABLE is not set
# end of IPM Message Channel [9] configuration

#
# IPM Message Channel [10] configuration
#
# CONFIG_IPM_MSG_CH_10_ENABLE is not set
# end of IPM Message Channel [10] configuration

#
# IPM Message Channel [11] configuration
#
# CONFIG_IPM_MSG_CH_11_ENABLE is not set
# end of IPM Message Channel [11] configuration

#
# IPM Message Channel [12] configuration
#
# CONFIG_IPM_MSG_CH_12_ENABLE is not set
# end of IPM Message Channel [12] configuration

#
# IPM Message Channel [13] configuration
#
# CONFIG_IPM_MSG_CH_13_ENABLE is not set
# end of IPM Message Channel [13] configuration

#
# IPM Message Channel [14] configuration
#
# CONFIG_IPM_MSG_CH_14_ENABLE is not set
# end of IPM Message Channel [14] configuration

#
# IPM Message Channel [15] configuration
#
# CONFIG_IPM_MSG_CH_15_ENABLE is not set
# end of IPM Message Channel [15] configuration

# CONFIG_IPM_INTEL_ADSP is not set
# CONFIG_IPM_LOG_LEVEL_OFF is not set
# CONFIG_IPM_LOG_LEVEL_ERR is not set
# CONFIG_IPM_LOG_LEVEL_WRN is not set
CONFIG_IPM_LOG_LEVEL_INF=y
# CONFIG_IPM_LOG_LEVEL_DBG is not set
CONFIG_IPM_LOG_LEVEL=3
# CONFIG_COUNTER is not set
# CONFIG_DMA is not set
# CONFIG_USB is not set
# CONFIG_CRYPTO is not set
# CONFIG_DISPLAY is not set
# CONFIG_LED_STRIP is not set
# CONFIG_LED is not set
# CONFIG_CAN is not set
# CONFIG_AUDIO is not set
# CONFIG_NEURAL_NET_ACCEL is not set
# CONFIG_HWINFO is not set
# CONFIG_ESPI is not set
# CONFIG_PS2 is not set
# CONFIG_VIDEO is not set
# CONFIG_EEPROM is not set
# CONFIG_PECI is not set
# CONFIG_PECI_INTERRUPT_DRIVEN is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEMC is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_EDAC is not set
# CONFIG_PM_CPU_OPS is not set

#
# Miscellaneous Drivers
#
# end of Miscellaneous Drivers

# CONFIG_DISK_DRIVERS is not set
# CONFIG_CACHE is not set
# CONFIG_SYSCON is not set
# end of Device Drivers

#
# C Library
#
# CONFIG_MINIMAL_LIBC is not set
CONFIG_NEWLIB_LIBC=y
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_HAS_NEWLIB_LIBC_NANO=y
CONFIG_NEWLIB_LIBC_NANO=y
CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048
# CONFIG_NEWLIB_LIBC_FLOAT_SCANF is not set
CONFIG_STDOUT_CONSOLE=y
# end of C Library

#
# Additional libraries
#
# CONFIG_LVGL is not set

#
# OS Support Library
#
# CONFIG_JSON_LIBRARY is not set
# CONFIG_RING_BUFFER is not set
# CONFIG_BASE64 is not set
# CONFIG_SYS_HEAP_VALIDATE is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_PRINTK_SYNC is not set
CONFIG_MPSC_PBUF=y
# CONFIG_MPSC_CLEAR_ALLOCATED is not set
CONFIG_REBOOT=y
CONFIG_CBPRINTF_COMPLETE=y
# CONFIG_CBPRINTF_NANO is not set
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
# CONFIG_CBPRINTF_FP_SUPPORT is not set
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_FP_ALWAYS_A is not set
CONFIG_CBPRINTF_N_SPECIFIER=y
# CONFIG_CBPRINTF_LIBC_SUBSTS is not set
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
# CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT is not set
# end of OS Support Library

CONFIG_POSIX_MAX_FDS=4
# CONFIG_POSIX_API is not set
# CONFIG_PTHREAD_IPC is not set
# CONFIG_POSIX_CLOCK is not set
CONFIG_MAX_TIMER_COUNT=5
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_EVENTFD is not set
# CONFIG_OPENAMP_RSC_TABLE is not set

#
# Util libraries
#
# CONFIG_FNMATCH is not set
# CONFIG_GETOPT is not set
# end of Util libraries
# end of Additional libraries

#
# Sub Systems and OS Services
#
CONFIG_BT=y
# CONFIG_BT_LOG_LEVEL_OFF is not set
# CONFIG_BT_LOG_LEVEL_ERR is not set
# CONFIG_BT_LOG_LEVEL_WRN is not set
CONFIG_BT_LOG_LEVEL_INF=y
# CONFIG_BT_LOG_LEVEL_DBG is not set
CONFIG_BT_LOG_LEVEL=3
CONFIG_BT_HCI=y
# CONFIG_BT_CUSTOM is not set
# CONFIG_BT_HCI_RAW is not set
# CONFIG_BT_HCI_RAW_H4 is not set
# CONFIG_BT_HCI_RAW_CMD_EXT is not set
# CONFIG_BT_PERIPHERAL is not set
CONFIG_BT_CENTRAL=y

#
# Broadcaster
#
CONFIG_BT_BROADCASTER=y
# end of Broadcaster

CONFIG_BT_EXT_ADV=y
# CONFIG_BT_EXT_ADV_LEGACY_SUPPORT is not set
CONFIG_BT_EXT_ADV_MAX_ADV_SET=2
# CONFIG_BT_PER_ADV is not set
# CONFIG_BT_PER_ADV_SYNC is not set
CONFIG_BT_OBSERVER=y

#
# GATT Services
#
# CONFIG_BT_DIS is not set
# CONFIG_BT_BAS is not set
# CONFIG_BT_HRS is not set
# CONFIG_BT_TPS is not set
# CONFIG_BT_OTS is not set
# end of GATT Services

CONFIG_BT_CONN=y
# CONFIG_BT_REMOTE_VERSION is not set
CONFIG_BT_PHY_UPDATE=y
CONFIG_BT_DATA_LEN_UPDATE=y
# CONFIG_BT_ISO_UNICAST is not set
# CONFIG_BT_ISO_BROADCAST is not set
CONFIG_BT_BUF_ACL_TX_SIZE=27
CONFIG_BT_BUF_ACL_TX_COUNT=3
CONFIG_BT_BUF_ACL_RX_SIZE=27
CONFIG_BT_BUF_ACL_RX_COUNT=6
CONFIG_BT_BUF_EVT_RX_SIZE=68
CONFIG_BT_BUF_EVT_RX_COUNT=10
CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=255
CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT=3
CONFIG_BT_BUF_CMD_TX_SIZE=255
CONFIG_BT_BUF_CMD_TX_COUNT=2
# CONFIG_BT_HCI_VS_EXT_DETECT is not set
# CONFIG_BT_HCI_MESH_EXT is not set
# CONFIG_BT_WAIT_NOP is not set
CONFIG_BT_ASSERT=y
CONFIG_BT_ASSERT_VERBOSE=y
# CONFIG_BT_ASSERT_PANIC is not set
CONFIG_BT_DEBUG=y
# CONFIG_BT_DEBUG_NONE is not set
CONFIG_BT_DEBUG_LOG=y
# CONFIG_BT_DEBUG_MONITOR_UART is not set
# CONFIG_BT_DEBUG_MONITOR_RTT is not set
# CONFIG_BT_DEBUG_HCI_DRIVER is not set

#
# Host Stack Configuration
#
CONFIG_BT_HCI_HOST=y
# CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT is not set
CONFIG_BT_HCI_ECC_STACK_SIZE=1140
CONFIG_BT_HCI_TX_PRIO=7
CONFIG_BT_HCI_RESERVE=1
CONFIG_BT_RX_PRIO=8
CONFIG_BT_DRIVER_RX_HIGH_PRIO=6
CONFIG_BT_HOST_CRYPTO=y
# CONFIG_BT_WHITELIST is not set
CONFIG_BT_CONN_TX_MAX=3
CONFIG_BT_USER_PHY_UPDATE=y
# CONFIG_BT_AUTO_PHY_UPDATE is not set
# CONFIG_BT_USER_DATA_LEN_UPDATE is not set
CONFIG_BT_AUTO_DATA_LEN_UPDATE=y
# CONFIG_BT_REMOTE_INFO is not set
# CONFIG_BT_SMP is not set

#
# L2CAP Options
#
CONFIG_BT_L2CAP_TX_BUF_COUNT=3
CONFIG_BT_L2CAP_TX_FRAG_COUNT=2
CONFIG_BT_L2CAP_TX_MTU=23
# CONFIG_BT_DEBUG_L2CAP is not set
# end of L2CAP Options

#
# ATT and GATT Options
#
CONFIG_BT_ATT_ENFORCE_FLOW=y
CONFIG_BT_ATT_PREPARE_COUNT=0
CONFIG_BT_GATT_SERVICE_CHANGED=y
# CONFIG_BT_GATT_DYNAMIC_DB is not set
CONFIG_BT_GATT_CACHING=y
# CONFIG_BT_GATT_NOTIFY_MULTIPLE is not set
# CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE is not set
# CONFIG_BT_GATT_CLIENT is not set
CONFIG_BT_GATT_READ_MULTIPLE=y
# CONFIG_BT_DEBUG_ATT is not set
# CONFIG_BT_DEBUG_GATT is not set
# end of ATT and GATT Options

CONFIG_BT_MAX_PAIRED=0
CONFIG_BT_CREATE_CONN_TIMEOUT=3
CONFIG_BT_CONN_PARAM_UPDATE_TIMEOUT=5000
CONFIG_BT_BACKGROUND_SCAN_INTERVAL=2048
CONFIG_BT_BACKGROUND_SCAN_WINDOW=18
CONFIG_BT_SCAN_WITH_IDENTITY=y
# CONFIG_BT_DEVICE_NAME_DYNAMIC is not set
CONFIG_BT_DEVICE_NAME="Zephyr"
CONFIG_BT_DEVICE_APPEARANCE=0
CONFIG_BT_ID_MAX=1
# CONFIG_BT_DF is not set
# CONFIG_BT_HOST_CCM is not set
# CONFIG_BT_DEBUG_HCI_CORE is not set
# CONFIG_BT_DEBUG_CONN is not set
# CONFIG_BT_DEBUG_ISO is not set
# CONFIG_BT_DEBUG_SERVICE is not set
# CONFIG_BT_LOG_SNIFFER_INFO is not set
# CONFIG_BT_TESTING is not set
# CONFIG_BT_BREDR is not set
# CONFIG_BT_HCI_VS_EVT_USER is not set

#
# BLE Controller support
#
# CONFIG_BT_CTLR_DEBUG_PINS_CPUAPP is not set
# CONFIG_BT_SHELL is not set
CONFIG_BT_COMPANY_ID=0x05F1
# CONFIG_BT_MESH is not set
# CONFIG_BT_AUDIO is not set

#
# Controller Area Network (CAN) bus subsystem
#
# CONFIG_ISOTP is not set
# end of Controller Area Network (CAN) bus subsystem

# CONFIG_CONSOLE_SUBSYS is not set
# CONFIG_CPLUSPLUS is not set

#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_STACK_USAGE is not set
# CONFIG_STACK_SENTINEL is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
# CONFIG_ASSERT is not set
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
# CONFIG_ASSERT_NO_COND_INFO is not set
# CONFIG_ASSERT_NO_MSG_INFO is not set
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_OPENOCD_SUPPORT is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# end of Debugging Options

# CONFIG_DISK_ACCESS is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set

#
# File Systems
#
# CONFIG_FILE_SYSTEM is not set
# CONFIG_NVS is not set
# end of File Systems

#
# Inter Processor Communication
#
CONFIG_RPMSG_SERVICE=y
CONFIG_RPMSG_SERVICE_SHM_BASE_ADDRESS=0x20070000
CONFIG_RPMSG_SERVICE_SHM_SIZE=0x10000
CONFIG_RPMSG_SERVICE_MODE_MASTER=y
# CONFIG_RPMSG_SERVICE_MODE_REMOTE is not set
CONFIG_RPMSG_SERVICE_NUM_ENDPOINTS=2
CONFIG_RPMSG_SERVICE_WORK_QUEUE_STACK_SIZE=2048
CONFIG_RPMSG_SERVICE_INIT_PRIORITY=48
CONFIG_RPMSG_SERVICE_EP_REG_PRIORITY=47
# CONFIG_RPMSG_SERVICE_LOG_LEVEL_OFF is not set
# CONFIG_RPMSG_SERVICE_LOG_LEVEL_ERR is not set
# CONFIG_RPMSG_SERVICE_LOG_LEVEL_WRN is not set
CONFIG_RPMSG_SERVICE_LOG_LEVEL_INF=y
# CONFIG_RPMSG_SERVICE_LOG_LEVEL_DBG is not set
CONFIG_RPMSG_SERVICE_LOG_LEVEL=3
# CONFIG_RPMSG_MULTI_INSTANCE is not set
# CONFIG_IPC_SERVICE is not set
# end of Inter Processor Communication

# CONFIG_JWT is not set
CONFIG_LOG=y
CONFIG_LOG_MODE_DEFERRED=y
# CONFIG_LOG2_MODE_DEFERRED is not set
# CONFIG_LOG2_MODE_IMMEDIATE is not set
# CONFIG_LOG_MODE_IMMEDIATE is not set
# CONFIG_LOG_MODE_MINIMAL is not set
# CONFIG_LOG_FRONTEND is not set

#
# Logging levels filtering
#
# CONFIG_LOG_RUNTIME_FILTERING is not set
CONFIG_LOG_OVERRIDE_LEVEL=0
CONFIG_LOG_MAX_LEVEL=4
# end of Logging levels filtering

#
# Output Formatting
#

#
# Prepend non-hexdump log message with function name
#
# CONFIG_LOG_FUNC_NAME_PREFIX_ERR is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_WRN is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_INF is not set
CONFIG_LOG_FUNC_NAME_PREFIX_DBG=y
# end of Prepend non-hexdump log message with function name

# CONFIG_LOG_MIPI_SYST_ENABLE is not set
CONFIG_LOG_BACKEND_SHOW_COLOR=y
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP=y
# end of Output Formatting

#
# Processing
#
# CONFIG_LOG_PRINTK is not set
CONFIG_LOG_MODE_OVERFLOW=y
# CONFIG_LOG_BLOCK_IN_THREAD is not set
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD=10
CONFIG_LOG_PROCESS_THREAD=y
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS=1000
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=768
CONFIG_LOG_BUFFER_SIZE=15360
CONFIG_LOG_DETECT_MISSED_STRDUP=y
CONFIG_LOG_STRDUP_MAX_STRING=66
CONFIG_LOG_STRDUP_BUF_COUNT=8
# CONFIG_LOG_STRDUP_POOL_PROFILING is not set
# end of Processing

#
# Backends
#
CONFIG_LOG_BACKEND_UART=y
CONFIG_LOG_BACKEND_UART_OUTPUT_TEXT=y
# CONFIG_LOG_BACKEND_SWO is not set
CONFIG_LOG_BACKEND_RTT=y
# CONFIG_LOG_BACKEND_RTT_MODE_DROP is not set
CONFIG_LOG_BACKEND_RTT_MODE_BLOCK=y
CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE=16
CONFIG_LOG_BACKEND_RTT_RETRY_CNT=4
CONFIG_LOG_BACKEND_RTT_RETRY_DELAY_MS=5
CONFIG_LOG_BACKEND_RTT_BUFFER=0
# end of Backends

#
# Misc
#
CONFIG_LOG_DOMAIN_ID=0
CONFIG_LOG2_USE_VLA=y
# CONFIG_LOG2_ALWAYS_RUNTIME is not set
# CONFIG_LOG2_FMT_SECTION is not set
# end of Misc

#
# Device Management
#

#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem

# CONFIG_MCUMGR is not set
# CONFIG_HAWKBIT is not set
# CONFIG_UPDATEHUB is not set
# CONFIG_OSDP is not set
# end of Device Management

# CONFIG_MODBUS is not set

#
# Networking
#
CONFIG_NET_BUF=y
CONFIG_NET_BUF_USER_DATA_SIZE=4
# CONFIG_NET_BUF_LOG is not set
# CONFIG_NET_BUF_LOG_LEVEL_OFF is not set
# CONFIG_NET_BUF_LOG_LEVEL_ERR is not set
# CONFIG_NET_BUF_LOG_LEVEL_WRN is not set
CONFIG_NET_BUF_LOG_LEVEL_INF=y
# CONFIG_NET_BUF_LOG_LEVEL_DBG is not set
CONFIG_NET_BUF_LOG_LEVEL=3
# CONFIG_NET_BUF_POOL_USAGE is not set
# CONFIG_NETWORKING is not set
# end of Networking

#
# Portability
#
# end of Portability

#
# Power Management
#
# CONFIG_SYS_POWER_MANAGEMENT is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_POLICY_RESIDENCY=y
# CONFIG_PM_POLICY_DUMMY is not set
# CONFIG_PM_POLICY_APP is not set
CONFIG_PM_POLICY_RESIDENCY_DEFAULT=y
# CONFIG_PM_LOG_LEVEL_OFF is not set
# CONFIG_PM_LOG_LEVEL_ERR is not set
# CONFIG_PM_LOG_LEVEL_WRN is not set
CONFIG_PM_LOG_LEVEL_INF=y
# CONFIG_PM_LOG_LEVEL_DBG is not set
CONFIG_PM_LOG_LEVEL=3
# CONFIG_DEVICE_POWER_MANAGEMENT is not set
# end of Power Management

# CONFIG_SHELL is not set
# CONFIG_STATS is not set
# CONFIG_IMG_MANAGER is not set

#
# Random Number Generators
#
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR=y
# CONFIG_XOROSHIRO_RANDOM_GENERATOR is not set
CONFIG_CSPRING_ENABLED=y
CONFIG_HARDWARE_DEVICE_CS_GENERATOR=y
# CONFIG_CTR_DRBG_CSPRNG_GENERATOR is not set
# end of Random Number Generators

#
# Storage
#
# CONFIG_STREAM_FLASH is not set
# end of Storage

# CONFIG_SETTINGS is not set
# CONFIG_TASK_WDT is not set

#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_TEST is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing

CONFIG_TIMING_FUNCTIONS=y
# CONFIG_TRACING is not set
# end of Sub Systems and OS Services

CONFIG_TOOLCHAIN_GNUARMEMB=y

#
# Build and Link Features
#

#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_HAS_FLASH_LOAD_OFFSET=y
# CONFIG_USE_DT_CODE_PARTITION is not set
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_KERNEL_ENTRY="__start"
CONFIG_LINKER_SORT_BY_ALIGNMENT=y
CONFIG_SRAM_OFFSET=0

#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
# end of Linker Sections
# end of Linker Options

#
# Compiler Options
#
# CONFIG_CODING_GUIDELINE_CHECK is not set
# CONFIG_NATIVE_APPLICATION is not set
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
# end of Compiler Options

# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y

#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
CONFIG_OUTPUT_DISASSEMBLY=y
# CONFIG_OUTPUT_DISASSEMBLE_ALL is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
# CONFIG_BUILD_NO_GAP_FILL is not set
CONFIG_BUILD_OUTPUT_BIN=y
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19 is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
# end of Build Options
# end of Build and Link Features

#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
# CONFIG_BOOTLOADER_MCUBOOT is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options

#
# Compatibility
#
CONFIG_COMPAT_INCLUDES=y
# end of Compatibility

And talking about how I read out the values of total_ns, I do this:

printk("total in ns: %d\n", total_ns);

Eventhough I am not really sure if it is ok, because at the moment i have been checking the value of "total_ns" by bugging in the program.

By the way, thanks a lot for your support.

[haakonsh]

CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y

Arch is running at 32.768kHz by default i think. If there's an issue in converting cycles to ns it might be that the conversion is done for an 64MHz arch instead.

BIA_JHLL said:

Eventhough I am not really sure if it is ok, because at the moment i have been checking the value of "total_ns" by bugging in the program.

Good, then we can rule out the print functions as a source of error. 

Can you share the raw values of start_time1, end_time1, total_cycles, total_ns?