Before updating to V2.00, the DTM tool can automatically detect the serial port, log has a clear indication whether it is connected to the target board, when the DTM update to V2.00, the DTM tool can not automatically identify the serial port, no way to determine whether through the serial control to the target board, log also has no prompt information。 waiting for yr reply ASAP.
Hi,
You can check the port via Device manager as the following figure.
Regards,
Amanda
Hi,
I get the same frame as your figure in the original post. DTM app doesn't list the device immediately, but it takes about 30 seconds. We are trying to improve that.
Can you check the JLINK serial port of DK detected by the Device manager while opening the DTM app? As the figure in my first rely. In this step, we can make sure the DK connects to the pc. Then, open the DTM app.
After selecting the DK, you will see the manual and functions are the same as the previous.
Please let me know this can help or not. Thanks.
-Amanda
Hi,
I get the same frame as your figure in the original post. DTM app doesn't list the device immediately, but it takes about 30 seconds. We are trying to improve that.
Can you check the JLINK serial port of DK detected by the Device manager while opening the DTM app? As the figure in my first rely. In this step, we can make sure the DK connects to the pc. Then, open the DTM app.
After selecting the DK, you will see the manual and functions are the same as the previous.
Please let me know this can help or not. Thanks.
-Amanda
