• State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 87 subscribers
  • Views 750 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 280034
Options
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Program nRF52840 using nRF53 DK

Sujith

Hello,

Is it possible to program a Fanstel BT840 (nRF52840) module using the nRF53 DK? Please let me know.

Thanks

Parents
  • +1

    Hi, 

    The nRF5340 DK supports programming and debugging external boards with nRF51 Series, nRF52 Series, or nRF53 Series System on Chip (SoC)s. To debug an external board with SEGGER J-Link OB IF, connect to the Debug output connector (P19) with a 10-pin cable the same as nRF52DK and nRF52840DK. Please make sure to provide the power both for the DK and the Fanstel BT840 (nRF52840) module. You also could take a look at some similar cases on Devzone. 

    Regards,
    Amanda

Reply
  • +1

    Hi, 

    The nRF5340 DK supports programming and debugging external boards with nRF51 Series, nRF52 Series, or nRF53 Series System on Chip (SoC)s. To debug an external board with SEGGER J-Link OB IF, connect to the Debug output connector (P19) with a 10-pin cable the same as nRF52DK and nRF52840DK. Please make sure to provide the power both for the DK and the Fanstel BT840 (nRF52840) module. You also could take a look at some similar cases on Devzone. 

    Regards,
    Amanda

Children
No Data
Related