• State Verified Answer
  • Locked Locked
  • Replies 8 replies
  • Subscribers 74 subscribers
  • Views 2458 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 280962
Options
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cant program custom board

Mindtech

I have a custom board like a breakout of NRF52820 with the QFN48 package. The design is according with the reference circuitry without changing a thing. The IO pins and SWD were breaked out to be acessible with jumpers. Needless to say the wiring of the JLink are VTref to VDD_NRF, SWDIO to SWDIO_NRF, SWDCLK to SWDCLC_NRF, GND to GND_NRF. I also tryied to wire the RESET to nRESET_NRF. NRF board is powered by a bench PSU.

I'm trying to program the processor on a Ubuntu machine with a JLink and didnt have any sucess. I Tryied with nrfconnect, nrfjprog, pyprog, the platformio extension and the Segger JLink_V758e app.

Just to mention I also have a ninab4 board with nrf52833 that is programmed through serial with DFU and it works fine.

Any help for programming the NRF52820?

The output for the JLink_V758e: Device "NRF52820_XXAA" selected.
Connecting to target via SWD
InitTarget() start
InitTarget() end
RESET (pin 15) high, but should be low. Please check target hardware.
RESET (pin 15) high, but should be low. Please check target hardware.
InitTarget() start
InitTarget() end
RESET (pin 15) high, but should be low. Please check target hardware.
InitTarget() start
InitTarget() end
RESET (pin 15) high, but should be low. Please check target hardware.
RESET (pin 15) high, but should be low. Please check target hardware.
InitTarget() start
InitTarget() end
RESET (pin 15) high, but should be low. Please check target hardware.
Cannot connect to target.

The output from nrfconnect is:

2021-12-08T17:21:01.918Z INFO Application data folder: /home/franklin/.config/nrfconnect/pc-nrfconnect-programmer
2021-12-08T17:21:02.400Z DEBUG iface: enp0s31f6
2021-12-08T17:21:02.400Z DEBUG IP4: 192.168.0.83
2021-12-08T17:21:02.400Z DEBUG IP6: 2804:14c:8783:85fd::1006
2021-12-08T17:21:02.400Z DEBUG MAC: e0:d5:5e:f0:ed:22
2021-12-08T17:21:02.401Z DEBUG Client Id: 865f42fb7bdae701c8d8b13ea064b525fb7b2bdd
2021-12-08T17:21:02.403Z DEBUG Google Analytics for category pc-nrfconnect-programmer has initialized
2021-12-08T17:21:02.463Z DEBUG App pc-nrfconnect-programmer v2.0.1 official
2021-12-08T17:21:02.463Z DEBUG App path: /home/franklin/.nrfconnect-apps/node_modules/pc-nrfconnect-programmer
2021-12-08T17:21:02.463Z DEBUG nRFConnect 3.9.1, required by the app is (^3.8.0)
2021-12-08T17:21:02.463Z DEBUG nRFConnect path: /tmp/.mount_nrfcon9sn8pe/resources/app.asar
2021-12-08T17:21:02.463Z DEBUG HomeDir: /home/franklin
2021-12-08T17:21:02.463Z DEBUG TmpDir: /tmp
2021-12-08T17:21:04.346Z ERROR Error while probing devices, more details in the debug log: JLINKARM_DLL_ERROR (Origin: "Error when running nrfdl_enumerate")

Parents
  • 0

    Hi

    Glad you were able to get the project to build and flash.

    Can you specify what you mean by "nothing seems to happen after programming". Does the P0.08 not behave as expected, if so, what does it do? Does the application work as intended on the NINAb4 board?

    There shouldn't be any further changes necessary as long as you have a custom board file for your custom board.

    Best regards,

    Simon

  • 0 in reply to Simonr

    I mean that the P0.08 does not change level as it should according to the program, it only stays low like the program didnt start. Yes the application works in the ninab4 as expected.

    So it is not necessary to pre flash the bootloader in orther for the custom board to work with west flash?

Reply
  • 0 in reply to Simonr

    I mean that the P0.08 does not change level as it should according to the program, it only stays low like the program didnt start. Yes the application works in the ninab4 as expected.

    So it is not necessary to pre flash the bootloader in orther for the custom board to work with west flash?

Children
No Data
Related
Terms of service