• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 74 subscribers
  • Views 549 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 281842
Options
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to switch BLE sniffer mode to listen specific devices?

vhang

Hi.

I'm enabling a BLE sniffer on rRF52840 DK to listen to packets between Windows and the other one BLE board, I can get advertising packets but Wireshark can't switch to capture the specific devices packets after I select the device from the list, it always keeps capturing advertise packets, could I know if there is an additional step I should do?

The BLE sniffer version is 4.1.0 and Wireshark is 3.6.0.

Thanks

Parents
  • 0

    Hi Vhang, 

    We had experienced this before but it was on very old nRF52840 DK and older sniffer version. 

    In theory you don't need to do anything else except for selecting the device from the list (the drop down list , please take a screenshot showing how you do it). 

    What you can try to do is to make sure the Jlink driver is up to date. The latest version is v7.6

    Then try to plug and unplug on different USB ports. 

    If that doesn't help please try to test on another nRF52 DK board or dongle. 

Reply
  • 0

    Hi Vhang, 

    We had experienced this before but it was on very old nRF52840 DK and older sniffer version. 

    In theory you don't need to do anything else except for selecting the device from the list (the drop down list , please take a screenshot showing how you do it). 

    What you can try to do is to make sure the Jlink driver is up to date. The latest version is v7.6

    Then try to plug and unplug on different USB ports. 

    If that doesn't help please try to test on another nRF52 DK board or dongle. 

Children
No Data
Related
Terms of service