Hi,
Referring to the case,
I used the peripheral_uart_coded.rar code, but when tried to flash it on the nRF5340-DK board there is an error been prompted as invalid use of undefined type 'struct bt_conn'. what might be the issue.
I'm using SDK v1.8.0 and Visual studio code.
Regards
Karthik Kumar
Hi Karthik Kumar,
The example code is made for v1.5.0 of nRF Connect for Desktop, so using it with v1.8.0 might cause errors and unexpected behavior.
This issue is fixed by changing the auth_conn parameter in LOG_INF in function num_comp_reply() to (void *)auth_conn so that you have the following instead:
static void num_comp_reply(bool accept)
{
if (accept) {
bt_conn_auth_passkey_confirm(auth_conn);
LOG_INF("Numeric Match, conn %p", (void *)auth_conn);
} else {
bt_conn_auth_cancel(auth_conn);
LOG_INF("Numeric Reject, conn %p", (void *)auth_conn);
}
bt_conn_unref(auth_conn);
auth_conn = NULL;
}
You should also be aware that there were some changes to the Zephyr Workqueue API in nRF Connect SDK v1.6.0, and part of the API has become deprecated and replaced. You can read more about this in Zephyr Workqueue API Migration, but the relevant parts for your code are the functions k_delayed_work_init() and k_delayed_work_submit():
| Deprecated API | Corresponding new API |
| k_delayed_work_init() | k_work_init_delayable() |
| k_delayed_work_submit() | k_work_schedule() or k_work_reschedule() |
As you can see, k_delayed_work_submit() has been split into two function that covers different usage scenarios, so you must make sure to use the correct one:
k_work_reschedule() behaves the same way as the old k_delayed_work_submit() function, and will resubmit the work item, even if it has already been queued.
k_work_schedule() will only submit the work item if it has not yet been queued.
Please see the release notes for other changes between specific nRF Connect SDK releases.
Best regards,
Marte
Hi Marte Myrvold,
Thank you the issue is fixed.
I wanted to set the TX power to the maximum and constant all the time but it look like set to 0.
Regards
Karthik Kumar
Hi Karthik Kumar,
How are you setting the TX power, and where do you see what it is set to?
Best regards,
Marte
Hi Marte,
I'm setting the tx_power using the function,
/******************************************* TX Power*********************************************************************/
static void set_tx_power(uint8_t handle_type, uint16_t handle, int8_t tx_pwr_lvl)
{
struct bt_hci_cp_vs_write_tx_power_level *cp;
struct bt_hci_rp_vs_write_tx_power_level *rp;
struct net_buf *buf, *rsp = NULL;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL,
sizeof(*cp));
if (!buf) {
printk("Unable to allocate command buffer\n");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(handle);
cp->handle_type = handle_type;
cp->tx_power_level = tx_pwr_lvl;
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL,
buf, &rsp);
if (err) {
uint8_t reason = rsp ?
((struct bt_hci_rp_vs_write_tx_power_level *)
rsp->data)->status : 0;
printk("Set Tx power err: %d reason 0x%02x\n", err, reason);
return;
}
rp = (void *)rsp->data;
printk("Actual Tx Power: %d\n", rp->selected_tx_power);
net_buf_unref(rsp);
}
void main(void)
{
int8_t tx_power = 0;
int blink_status = 0;
int err = 0;
configure_gpio();
err = uart_init();
if (err) {
error();
}
bt_conn_cb_register(&conn_callbacks);
if (IS_ENABLED(CONFIG_BT_NUS_SECURITY_ENABLED)) {
bt_conn_auth_cb_register(&conn_auth_callbacks);
}
err = bt_enable(NULL);
if (err) {
error();
}
set_tx_power(BT_HCI_VS_LL_HANDLE_TYPE_ADV,0,tx_power);
LOG_INF("Bluetooth initialized");
k_sem_give(&ble_init_ok);
if (IS_ENABLED(CONFIG_SETTINGS)) {
settings_load();
}
err = bt_nus_init(&nus_cb);
if (err) {
LOG_ERR("Failed to initialize UART service (err: %d)", err);
return;
}
bt_ready();
printk("Starting Nordic UART service example c'est moi\n");
for (;;) {
dk_set_led(RUN_STATUS_LED, (++blink_status) % 2);
k_sleep(K_MSEC(RUN_LED_BLINK_INTERVAL));
/*ran_data();*/
const uint8_t sensor_data ='d';
uint16_t length = 1;
//uint32_t sd_ble_gap_rssi_start ( sd, NULL, NULL)
//uint8_tsdc_hci_cmd_sp_read_rssi(constsdc_hci_cmd_sp_read_rssi_t*p_params, sdc_hci_cmd_sp_read_rssi_return_t*p_return);
if (bt_nus_send(NULL, &sensor_data, length)) {
LOG_WRN("Failed to send data over BLE connection");
printk("Failed to send data over BLE connectionl\n");
}
}
}
void ble_write_thread(void)
{
/* Don't go any further until BLE is initialized */
k_sem_take(&ble_init_ok, K_FOREVER);
for (;;) {
/* Wait indefinitely for data to be sent over bluetooth */
struct uart_data_t *buf = k_fifo_get(&fifo_uart_rx_data,
K_FOREVER);
//struct uart_user_data *buf ;
const uint8_t sensor_data ='d';
uint16_t length = 1;
if (bt_nus_send(NULL, &sensor_data, length)) {
LOG_WRN("Failed to send data over BLE connection");
printk("Failed to send data over BLE connectionl\n");
}
k_free(buf);
}
}
K_THREAD_DEFINE(ble_write_thread_id, STACKSIZE, ble_write_thread, NULL, NULL,
NULL, PRIORITY, 0, 0);/*
* Copyright (c) 2018 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
*/
/** @file
* @brief Nordic UART Service Client sample
*/
/****************************Coded PHY********************************/
#include <zephyr/types.h>
#include <stddef.h>
/*********************************************************************/
#include <errno.h>
#include <zephyr.h>
#include <sys/byteorder.h>
#include <sys/printk.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/hci.h>
#include <bluetooth/conn.h>
#include <bluetooth/uuid.h>
#include <bluetooth/gatt.h>
#include <bluetooth/services/nus.h>
#include <bluetooth/services/nus_client.h>
#include <bluetooth/gatt_dm.h>
#include <bluetooth/scan.h>
#include <settings/settings.h>
#include <drivers/uart.h>
#include <logging/log.h>
#define LOG_MODULE_NAME central_uart
LOG_MODULE_REGISTER(LOG_MODULE_NAME);
/* UART payload buffer element size. */
#define UART_BUF_SIZE 20
#define KEY_PASSKEY_ACCEPT DK_BTN1_MSK
#define KEY_PASSKEY_REJECT DK_BTN2_MSK
#define NUS_WRITE_TIMEOUT K_MSEC(150)
#define UART_WAIT_FOR_BUF_DELAY K_MSEC(50)
#define UART_RX_TIMEOUT 50
static const struct device *uart;
static struct k_work_delayable uart_work;
K_SEM_DEFINE(nus_write_sem, 0, 1);
struct uart_data_t {
void *fifo_reserved;
uint8_t data[UART_BUF_SIZE];
uint16_t len;
};
static K_FIFO_DEFINE(fifo_uart_tx_data);
static K_FIFO_DEFINE(fifo_uart_rx_data);
static struct bt_conn *default_conn;
static struct bt_nus_client nus_client;
static void ble_data_sent(struct bt_nus_client *nus, uint8_t err,
const uint8_t *const data, uint16_t len)
{
ARG_UNUSED(nus);
struct uart_data_t *buf;
/* Retrieve buffer context. */
buf = CONTAINER_OF(data, struct uart_data_t, data);
k_free(buf);
k_sem_give(&nus_write_sem);
if (err) {
LOG_WRN("ATT error code: 0x%02X", err);
}
}
/****************************************Reading RSSI Value*************************************/
static void read_conn_rssi(uint16_t handle, int8_t *rssi)
{
struct net_buf *buf, *rsp = NULL;
struct bt_hci_cp_read_rssi *cp;
struct bt_hci_rp_read_rssi *rp;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_READ_RSSI, sizeof(*cp));
if (!buf) {
printk("Unable to allocate command buffer\n");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(handle);
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_RSSI, buf, &rsp);
if (err) {
uint8_t reason = rsp ?
((struct bt_hci_rp_read_rssi *)rsp->data)->status : 0;
printk("Read RSSI err: %d reason 0x%02x\n", err, reason);
return;
}
rp = (void *)rsp->data;
*rssi = rp->rssi;
net_buf_unref(rsp);
}
/*****************************************TX Power**************************************************/
static void set_tx_power(uint8_t handle_type, uint16_t handle, int8_t tx_pwr_lvl)
{
struct bt_hci_cp_vs_write_tx_power_level *cp;
struct bt_hci_rp_vs_write_tx_power_level *rp;
struct net_buf *buf, *rsp = NULL;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL,
sizeof(*cp));
if (!buf) {
printk("Unable to allocate command buffer\n");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(handle);
cp->handle_type = handle_type;
cp->tx_power_level = tx_pwr_lvl;
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL,
buf, &rsp);
if (err) {
uint8_t reason = rsp ?
((struct bt_hci_rp_vs_write_tx_power_level *)
rsp->data)->status : 0;
printk("Set Tx power err: %d reason 0x%02x\n", err, reason);
return;
}
rp = (void *)rsp->data;
printk("Actual Tx Power: %d\n", rp->selected_tx_power);
net_buf_unref(rsp);
}
/****************************************Receving Data Via BLE*************************************/
static uint8_t ble_data_received(struct bt_nus_client *nus,
const uint8_t *data, uint16_t len)
{
ARG_UNUSED(nus);
int err;
int8_t rssi = 0xFF;
for (uint16_t pos = 0; pos != len;) {
struct uart_data_t *tx = k_malloc(sizeof(*tx));
if (!tx) {
LOG_WRN("Not able to allocate UART send data buffer");
printk("Not able to allocate UART send data buffer\n");
return BT_GATT_ITER_CONTINUE;
}
/* Keep the last byte of TX buffer for potential LF char. */
size_t tx_data_size = sizeof(tx->data) - 1;
if ((len - pos) > tx_data_size) {
tx->len = tx_data_size;
} else {
tx->len = (len - pos);
}
memcpy(tx->data, &data[pos], tx->len);
pos += tx->len;
/* Append the LF character when the CR character triggered
* transmission from the peer.
*/
if ((pos == len) && (data[len - 1] == '\r')) {
tx->data[tx->len] = '\n';
tx->len++;
}
/* modifications*/
printk("\n");
//int counter_start(const struct device *dev);
//int counter_get_value(const struct device *dev, uint32_t *ticks)
//typedef uint32_t(* nrf_log_timestamp_func_t)(void);
err = uart_tx(uart, tx->data, tx->len, SYS_FOREVER_MS);
read_conn_rssi(NULL, &rssi);
printk(" RSSI: %d",rssi);
if (err) {
k_fifo_put(&fifo_uart_tx_data, tx);
}
}
return BT_GATT_ITER_CONTINUE;
}
static void uart_cb(const struct device *dev, struct uart_event *evt, void *user_data)
{
ARG_UNUSED(dev);
static uint8_t *current_buf;
static size_t aborted_len;
static bool buf_release;
struct uart_data_t *buf;
static uint8_t *aborted_buf;
switch (evt->type) {
case UART_TX_DONE:
if ((evt->data.tx.len == 0) ||
(!evt->data.tx.buf)) {
return;
}
if (aborted_buf) {
buf = CONTAINER_OF(aborted_buf, struct uart_data_t,
data);
aborted_buf = NULL;
aborted_len = 0;
} else {
buf = CONTAINER_OF(evt->data.tx.buf,
struct uart_data_t,
data);
}
k_free(buf);
buf = k_fifo_get(&fifo_uart_tx_data, K_NO_WAIT);
if (!buf) {
return;
}
if (uart_tx(uart, buf->data, buf->len, SYS_FOREVER_MS)) {
LOG_WRN("Failed to send data over UART");
}
break;
case UART_RX_RDY:
buf = CONTAINER_OF(evt->data.rx.buf, struct uart_data_t, data);
buf->len += evt->data.rx.len;
buf_release = false;
if (buf->len == UART_BUF_SIZE) {
k_fifo_put(&fifo_uart_rx_data, buf);
} else if ((evt->data.rx.buf[buf->len - 1] == '\n') ||
(evt->data.rx.buf[buf->len - 1] == '\r')) {
k_fifo_put(&fifo_uart_rx_data, buf);
current_buf = evt->data.rx.buf;
buf_release = true;
uart_rx_disable(uart);
}
break;
case UART_RX_DISABLED:
buf = k_malloc(sizeof(*buf));
if (buf) {
buf->len = 0;
} else {
LOG_WRN("Not able to allocate UART receive buffer");
k_work_reschedule(&uart_work, UART_WAIT_FOR_BUF_DELAY);
return;
}
uart_rx_enable(uart, buf->data, sizeof(buf->data),
UART_RX_TIMEOUT);
break;
case UART_RX_BUF_REQUEST:
buf = k_malloc(sizeof(*buf));
if (buf) {
buf->len = 0;
uart_rx_buf_rsp(uart, buf->data, sizeof(buf->data));
} else {
LOG_WRN("Not able to allocate UART receive buffer");
}
break;
case UART_RX_BUF_RELEASED:
buf = CONTAINER_OF(evt->data.rx_buf.buf, struct uart_data_t,
data);
if (buf_release && (current_buf != evt->data.rx_buf.buf)) {
k_free(buf);
buf_release = false;
current_buf = NULL;
}
break;
case UART_TX_ABORTED:
if (!aborted_buf) {
aborted_buf = (uint8_t *)evt->data.tx.buf;
}
aborted_len += evt->data.tx.len;
buf = CONTAINER_OF(aborted_buf, struct uart_data_t,
data);
uart_tx(uart, &buf->data[aborted_len],
buf->len - aborted_len, SYS_FOREVER_MS);
break;
default:
break;
}
}
static void uart_work_handler(struct k_work *item)
{
struct uart_data_t *buf;
buf = k_malloc(sizeof(*buf));
if (buf) {
buf->len = 0;
} else {
LOG_WRN("Not able to allocate UART receive buffer");
k_work_reschedule(&uart_work, UART_WAIT_FOR_BUF_DELAY);
return;
}
uart_rx_enable(uart, buf->data, sizeof(buf->data), UART_RX_TIMEOUT);
}
static int uart_init(void)
{
int err;
struct uart_data_t *rx;
uart = device_get_binding(DT_LABEL(DT_NODELABEL(uart0)));
if (!uart) {
LOG_ERR("UART binding failed");
return -ENXIO;
}
rx = k_malloc(sizeof(*rx));
if (rx) {
rx->len = 0;
} else {
return -ENOMEM;
}
k_work_init_delayable(&uart_work, uart_work_handler);
err = uart_callback_set(uart, uart_cb, NULL);
if (err) {
return err;
}
return uart_rx_enable(uart, rx->data, sizeof(rx->data),
UART_RX_TIMEOUT);
}
static void discovery_complete(struct bt_gatt_dm *dm,
void *context)
{
struct bt_nus_client *nus = context;
LOG_INF("Service discovery completed");
bt_gatt_dm_data_print(dm);
bt_nus_handles_assign(dm, nus);
bt_nus_subscribe_receive(nus);
bt_gatt_dm_data_release(dm);
}
static void discovery_service_not_found(struct bt_conn *conn,
void *context)
{
LOG_INF("Service not found");
}
static void discovery_error(struct bt_conn *conn,
int err,
void *context)
{
LOG_WRN("Error while discovering GATT database: (%d)", err);
}
struct bt_gatt_dm_cb discovery_cb = {
.completed = discovery_complete,
.service_not_found = discovery_service_not_found,
.error_found = discovery_error,
};
static void gatt_discover(struct bt_conn *conn)
{
int err;
if (conn != default_conn) {
return;
}
err = bt_gatt_dm_start(conn,
BT_UUID_NUS_SERVICE,
&discovery_cb,
&nus_client);
if (err) {
LOG_ERR("could not start the discovery procedure, error "
"code: %d", err);
}
}
static void exchange_func(struct bt_conn *conn, uint8_t err, struct bt_gatt_exchange_params *params)
{
if (!err) {
LOG_INF("MTU exchange done");
} else {
LOG_WRN("MTU exchange failed (err %" PRIu8 ")", err);
}
}
static void connected(struct bt_conn *conn, uint8_t conn_err)
{
char addr[BT_ADDR_LE_STR_LEN];
int err;
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
if (conn_err) {
LOG_INF("Failed to connect to %s (%d)", log_strdup(addr),
conn_err);
if (default_conn == conn) {
bt_conn_unref(default_conn);
default_conn = NULL;
err = bt_scan_start(BT_SCAN_TYPE_SCAN_ACTIVE);
if (err) {
LOG_ERR("Scanning failed to start (err %d)",
err);
}
}
return;
}
LOG_INF("Connected: %s", log_strdup(addr));
static struct bt_gatt_exchange_params exchange_params;
exchange_params.func = exchange_func;
err = bt_gatt_exchange_mtu(conn, &exchange_params);
if (err) {
LOG_WRN("MTU exchange failed (err %d)", err);
}
err = bt_conn_set_security(conn, BT_SECURITY_L2);
if (err) {
LOG_WRN("Failed to set security: %d", err);
gatt_discover(conn);
}
err = bt_scan_stop();
if ((!err) && (err != -EALREADY)) {
LOG_ERR("Stop LE scan failed (err %d)", err);
}
}
static void disconnected(struct bt_conn *conn, uint8_t reason)
{
char addr[BT_ADDR_LE_STR_LEN];
int err;
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
LOG_INF("Disconnected: %s (reason %u)", log_strdup(addr),
reason);
if (default_conn != conn) {
return;
}
bt_conn_unref(default_conn);
default_conn = NULL;
err = bt_scan_start(BT_SCAN_TYPE_SCAN_ACTIVE);
if (err) {
LOG_ERR("Scanning failed to start (err %d)",
err);
}
}
static void security_changed(struct bt_conn *conn, bt_security_t level,
enum bt_security_err err)
{
char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
if (!err) {
LOG_INF("Security changed: %s level %u", log_strdup(addr),
level);
} else {
LOG_WRN("Security failed: %s level %u err %d", log_strdup(addr),
level, err);
}
gatt_discover(conn);
}
static struct bt_conn_cb conn_callbacks = {
.connected = connected,
.disconnected = disconnected,
.security_changed = security_changed
};
/*
static void scan_filter_match(struct bt_scan_device_info *device_info,
struct bt_scan_filter_match *filter_match,
bool connectable)
{
char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(device_info->recv_info->addr, addr, sizeof(addr));
LOG_INF("Filters matched. Address: %s connectable: %d",
log_strdup(addr), connectable);
}
*/
/************************* Coded PHY************************************/
static void scan_filter_match(struct bt_scan_device_info *device_info,
struct bt_scan_filter_match *filter_match,
bool connectable)
{
int err;
char addr[BT_ADDR_LE_STR_LEN];
struct bt_conn_le_create_param *conn_params;
bt_addr_le_to_str(device_info->recv_info->addr, addr, sizeof(addr));
printk("Filters matched. Address: %s connectable: %s\n",
addr, connectable ? "yes" : "no");
err = bt_scan_stop();
if (err) {
printk("Stop LE scan failed (err %d)\n", err);
}
conn_params = BT_CONN_LE_CREATE_PARAM(
BT_CONN_LE_OPT_CODED | BT_CONN_LE_OPT_NO_1M,
BT_GAP_SCAN_FAST_INTERVAL,
BT_GAP_SCAN_FAST_INTERVAL);
err = bt_conn_le_create(device_info->recv_info->addr, conn_params,
BT_LE_CONN_PARAM_DEFAULT,
&default_conn);
if (err) {
printk("Create conn failed (err %d)\n", err);
err = bt_scan_start(BT_SCAN_TYPE_SCAN_ACTIVE);
if (err) {
printk("Scanning failed to start (err %d)\n", err);
return;
}
}
printk("Connection pending\n");
}
//BT_SCAN_CB_INIT(scan_cb, scan_filter_match, NULL, NULL, NULL);
/***********************************************************************************/
static void scan_connecting_error(struct bt_scan_device_info *device_info)
{
LOG_WRN("Connecting failed");
}
static void scan_connecting(struct bt_scan_device_info *device_info,
struct bt_conn *conn)
{
default_conn = bt_conn_ref(conn);
}
static int nus_client_init(void)
{
int err;
struct bt_nus_client_init_param init = {
.cb = {
.received = ble_data_received,
.sent = ble_data_sent,
}
};
err = bt_nus_client_init(&nus_client, &init);
if (err) {
LOG_ERR("NUS Client initialization failed (err %d)", err);
return err;
}
LOG_INF("NUS Client module initialized");
return err;
}
BT_SCAN_CB_INIT(scan_cb, scan_filter_match, NULL,
scan_connecting_error, scan_connecting);
static void scan_init(void)
{
int err;
/* Use active scanning and disable duplicate filtering to handle any
* devices that might update their advertising data at runtime. */
struct bt_le_scan_param scan_param = {
.type = BT_LE_SCAN_TYPE_ACTIVE,
.interval = BT_GAP_SCAN_FAST_INTERVAL,
.window = BT_GAP_SCAN_FAST_WINDOW,
.options = BT_LE_SCAN_OPT_CODED | BT_LE_SCAN_OPT_NO_1M
};
struct bt_scan_init_param scan_init = {
.connect_if_match = 0,
.scan_param = &scan_param,
.conn_param = NULL
};
bt_scan_init(&scan_init);
bt_scan_cb_register(&scan_cb);
err = bt_scan_filter_add(BT_SCAN_FILTER_TYPE_UUID, BT_UUID_HRS);
if (err) {
printk("Scanning filters cannot be set (err %d)\n", err);
return;
}
err = bt_scan_filter_enable(BT_SCAN_UUID_FILTER, false);
if (err) {
printk("Filters cannot be turned on (err %d)\n", err);
}
}
static void auth_cancel(struct bt_conn *conn)
{
char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
LOG_INF("Pairing cancelled: %s", log_strdup(addr));
}
static void pairing_complete(struct bt_conn *conn, bool bonded)
{
char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
LOG_INF("Pairing completed: %s, bonded: %d", log_strdup(addr),
bonded);
}
static void pairing_failed(struct bt_conn *conn, enum bt_security_err reason)
{
char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
LOG_WRN("Pairing failed conn: %s, reason %d", log_strdup(addr),
reason);
}
static struct bt_conn_auth_cb conn_auth_callbacks = {
.cancel = auth_cancel,
.pairing_complete = pairing_complete,
.pairing_failed = pairing_failed
};
void main(void)
{
int err;
err = bt_conn_auth_cb_register(&conn_auth_callbacks);
if (err) {
LOG_ERR("Failed to register authorization callbacks.");
return;
}
err = bt_enable(NULL);
if (err) {
LOG_ERR("Bluetooth init failed (err %d)", err);
return;
}
LOG_INF("Bluetooth initialized");
if (IS_ENABLED(CONFIG_SETTINGS)) {
settings_load();
}
bt_conn_cb_register(&conn_callbacks);
int (*module_init[])(void) = {uart_init, scan_init, nus_client_init};
for (size_t i = 0; i < ARRAY_SIZE(module_init); i++) {
err = (*module_init[i])();
if (err) {
return;
}
}
printk("Starting Bluetooth Central UART example\n");
scan_init();
err = bt_scan_start(BT_SCAN_TYPE_SCAN_ACTIVE);
if (err) {
LOG_ERR("Scanning failed to start (err %d)", err);
return;
}
LOG_INF("Scanning successfully started");
for (;;) {
/* Wait indefinitely for data to be sent over Bluetooth */
struct uart_data_t *buf = k_fifo_get(&fifo_uart_rx_data,
K_FOREVER);
err = bt_nus_client_send(&nus_client, buf->data, buf->len);
if (err) {
LOG_WRN("Failed to send data over BLE connection"
"(err %d)", err);
}
err = k_sem_take(&nus_write_sem, NUS_WRITE_TIMEOUT);
if (err) {
LOG_WRN("NUS send timeout");
}
}
}
Hi,
In the peripheral code you set the variable tx_power to 0 in main():
int8_t tx_power = 0;
And then call set_tx_power() with tx_power as a parameter:
set_tx_power(BT_HCI_VS_LL_HANDLE_TYPE_ADV,0,tx_power);So you are setting the tx power to 0 here.
If this is not the case and you are actually calling set_tx_power() with tx_power as something other than zero, can you tell me how you can see that the TX power is set to 0? Do you have any logs from the device to share?
Best regards,
Marte