• State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 67 subscribers
  • Views 5028 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 108391
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error when bootloader with Master Control Panel

trananh

Hi,

I 'm using MCP v3.9.0.6, softdevice v7.2.0 and pca10003 board.

After load bootloader program to board. I use MCP to load application for it. In MCP, I choose device dfu_targ, connect, discovery services, and DFU choose my .HEX file. But after upload firmware 100%. MCP shows error and I can not solve this image description

image description

Thanks and regard

Parents
  • 0

    @HungBui

    I tried as you said. In Bootloader, it automatically enter to bootloader mode so I think GPIO is not important and I only change IROM and IRAM size as photo below but it still not work, MCP can not discover device

Reply
  • 0

    @HungBui

    I tried as you said. In Bootloader, it automatically enter to bootloader mode so I think GPIO is not important and I only change IROM and IRAM size as photo below but it still not work, MCP can not discover device

Children
No Data
Related