BLE transmission / reception test FW

[Shuto Kimura]

Hi,

I'm thinking of doing a send / receive test of nRF52832.
The Bluetooth test set uses MT8852B (anritsu).

At that time, it is necessary to send a signal by HCI or 2-wire from the test set to nRF52832 and test while changing the signal strength.

Would you please provide a link if you have a test FW etc.

[Kenneth]

You can download the nRF5 SDK from: https://www.nordicsemi.com/Products/Development-software/nRF5-SDK 

After unzipping you can find the project in \examples\dtm\direct_test_mode. If you are using the nRF52832 you should open the pca10040 project. The pins are configured in the pca10040.h, for instance (these can be changed as you best see fit):
#define RX_PIN_NUMBER 8
#define TX_PIN_NUMBER 6

To compile the project I recommend using the SES project, since it's a free license:
https://infocenter.nordicsemi.com/topic/ug_getting_started/UG/common/nordic_tools.html

Getting started:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.1.0/nrf51_getting_started.html 

The documentation is found here: 
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.1.0/ble_sdk_app_dtm_serial.html 

If you know which pins you want to use for 2-wire (RX and TX) I can compile the project for you.

Best regards,
Kenneth

[Shuto Kimura]

Thank you for a polite answer.
The problem seems to be solved.

Shuto