THINGY91 start

[Hoang]

hihih

I have DK9160 and THINGY91, which I bought 2 years ago. 

I want to use them now. 

I got the output:

***** Booting Zephyr OS build v1.14.99-ncs2-495-ga8933a2ead01 *****
[00:00:00.006,469] [1B][0m<inf> mcuboot: Starting bootloader[1B][0m
[00:00:00.014,862] [1B][0m<inf> mcuboot: Primary image: magic=unset, copy_done=0x3, image_ok=0x3[1B][0m
[00:00:00.026,245] [1B][0m<inf> mcuboot: Scratch: magic=unset, copy_done=0x50, image_ok=0x3[1B][0m
[00:00:00.037,017] [1B][0m<inf> mcuboot: Boot source: primary slot[1B][0m
[00:00:00.048,278] [1B][0m<inf> mcuboot: Swap type: none[1B][0m
[00:00:00.400,421] [1B][1;31m<err> mcuboot: Image in the primary slot is not valid![1B][0m
[00:00:00.410,278] [1B][1;31m<err> mcuboot: Unable to find bootable image[1B][0m

I don't know how to fix this problem. could you plz help me. 

Tusen hjertelig takk

Mvh

Hoang

[SwRa]

Hi,

Have you previously used the Thingy:91 ad the DK with any other applications.? The error should be because the sample is not supported by the board. Taking a look at the LIS2DH sample, it periodically reads accelerometer data from the LIS2DH sensor (or the compatible LS2DH12, LIS3DH, and LSM303DLHC sensors), and displays the sensor data on the console. But Thing:91 doesn't have any of the compatible sensors: https://infocenter.nordicsemi.com/topic/ug_thingy91/UG/thingy91/hw_description/motion_sensors.html?cp=14_1_2_5.

So this example cannot be run on a Thingy:91 board. 

Best Regards,

Swathy