• State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 74 subscribers
  • Views 1329 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 284426
Options
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NFC in nRF5340

mexco

Hi, I going to add NFC to nRF5340DK, but does not know from where to start NFC program ? Please, guide with required config in prj fiel, overlay file, peripheral initialization and binding, data transfer example.

thanks

Gulzar Singh 

Parents
  • 0

    Hi Gulzar

    Most of the NFC samples in the nRF Connect SDK are compatible with the nRF5340 DK, so I would suggest starting out with the sample fitting your needs the best, and start development from there. You should get a good view of what configs and peripherals are needed there.

    Best regards,

    Simon

Reply
  • 0

    Hi Gulzar

    Most of the NFC samples in the nRF Connect SDK are compatible with the nRF5340 DK, so I would suggest starting out with the sample fitting your needs the best, and start development from there. You should get a good view of what configs and peripherals are needed there.

    Best regards,

    Simon

Children
  • 0 in reply to Simonr

    Hi Simonr, I studied all the sample codes suggested by you in the link 

    Simonr said:
    NFC

    . My objective is to store user credentials sent through NFC in UICR register and Flash. So, from above samples, it seems that the sample code in 

    • NFC: Writable NDEF message is suitable for this objective.  I want to store the WIFI SSID name and Password in one record, HOST and URL in second record, User Name and Password in 3rd record. Some, device specific information in UICR. SO, what you suggest about ?
Related
Terms of service