Usb Serial data transfer for Thingy:91

[Pradeep S]

Is there any precompiled binaries available to transfer the Thingy:91 sensor readings via usb serial like( temp, humi, pressure, light, accel, gas, lat&lng), right now I'm using Edge impulse firmware on my thingy but it only transfer the data when I connected to the Edge impulse CLI, I need to get the data via usb serial method.. 

Regards, 

Pradeep S

[Albrecht Markus Schellenberger]

Hello Pradeep S,

referring to the BME680: Integrated environmental sensor, BH1749: Ambient Light Sensor IC, ADXL362: Three Axis Accelerometer & ADXL372: Three Axis High-g I2C/SPI Accelerometer samples. You have to have build them yourself though, as there are no pre-compiled binaries available.

Regards,

Markus

[Pradeep S]

Actually I don't have a DK or Jlink either, can i program via nRF connect

[Albrecht Markus Schellenberger]

Pradeep S said:

Actually I don't have a DK or Jlink either, can i program via nRF connect

Yes. If you are using NCS v1.7.0 or newer, you can build the mentioned samples for target thingy91_nrf9160_ns.

In the Programmer tool, you then can choose ../<your_sample>/<your_build_folder>/zephyr/app_signed.hex for flashing.

Regards,

Markus

[Pradeep S]

So how can i get a Latitude and Longitude data via Serial

Regards

Pradeep

[Albrecht Markus Schellenberger]

Hello Pradeep,

Pradeep S said:

So how can i get a Latitude and Longitude data via Serial

referring to the nRF9160: GNSS sample.

Regards,

Markus