Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

[tejas_dev]

Hello Developers,

I am facing a issue to connect my nrf9160dk as a lwm2m client in the test coiote iot device management server.

I am following the official documentation to connect but even if i configure the device to connect to the particular server, the device is not connecting.

I hope i can get some help if anybody have faced same issue  and have a different soutions.

server adress i am using: https://lwm2m-test.avsystem.io/

iam using connect via management server.port :5684

i am really Looking forward for the reply,

[Charlie]

Hi Tejas_dev,

No, you do not need to create a new device tree file(which describes the hardware) for this board since the manufacturer already add it to Zephyr project, but you do need to adapt the sample codes because some pins are modified and even some peripherals are not used on this custom board.

Best regards,

Charlie

[tejas_dev]

Hi charlie, Actually i tried deleting all the sensors related code and tried with it, it Builds and it also flashes.

But when i run in putty it shows me "GPIO binding Not found" and  also image not verified(-5)

What can be the reason?

i have deleted all the pheripherals and ports related to nrf what can be the reason for this please ask me if you need furthur info 

[Charlie]

Hi tejas_dev,

It will be much easier to debug this issue with the hardware on hand. Have you checked with About (actinius.com) directly? 

Best regards,

Charlie

[tejas_dev]

hi charlie, i understand ,

i checked with actinius but no reply yet i am working on it if i get any solutions i will post it here,

thank you for your help