Acceleration values on the LTE terminal for nRF9160

[HarishNV]

Hi,

I'm using the default software to check the acceleration values when there is a movement in the Thingy:91 on the LTE Monitor terminal.

The document says that this type of output should be seen on the console: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/zephyr/samples/sensor/adxl362/README.html#adxl362

But I'm unable to see anything on the console when I move the Thingy:91. Could you please tell me how to see the values acceleration values on the console?

[Albrecht Markus Schellenberger]

Hello Harish,

The document says that this type of output should be seen on the console: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/zephyr/samples/sensor/adxl362/README.html#adxl362

The sample you are referring to is not the one that is flashed on your Thingy:91 currently. If you want to see those values, you have to either:

• Build and Run the above mentioned sample, as described in the Building and Running section.

or

• Implement its functionality into your own application.
  
  

But I'm unable to see anything on the console when I move the Thingy:91. Could you please tell me how to see the values acceleration values on the console?

As described in this section, the Asset Tracker itself will not print the accelerometer sensor readings to the terminal or nRF Cloud.

Regards,

Markus

[HarishNV]

I'm using the GitHub code from Nordic (https://github.com/nrfconnect/sdk-nrf) inside applications/asset_tracker_v2 folder. How can I build the system in VSC with those commands? Could you guide me?

Do we have ADXL362  sensor on Thingy91?