Extended Advertising - reception and data size

[axel_s]

Hi,

I recently started with nRF52840-DK, Zephyr and nRF Connect SDK (v. 1.9.1). I want to test extended advertising. Since there is no example of "pure" extended advertising (i.e. no periodic), I modified the periodic_adv example. Modification is quite easy: In prj.conf setting CONFIG_BT_PER_ADV=n, in main.c skipping bt_le_per_adv_set_param() and bt_le_per_adv_start(), usage of bt_le_ext_adv_set_data() instead of bt_le_per_adv_set_data(). Now extended advertising runs well. With a Sodera sniffer, I can see three ADV_EXT_IND frames in channels 37/38/39, followed by an AUX_ADV_IND frame in one of the data channels. The AUX_ADV_IND frame contains two AD elements: One with the data I want to transmit and one with the complete local name as set in prj.conf.

For reception, I use the periodic_sync example, which should support extended advertising without the periodic functionality too.

Now the questions:

My receiver calls the scan_recv function, but always I see only one of the AD elements. The buffer contains only the AD element with the local name, which is the last one in the frame (according to the sniffer raw data). There is no indication of the reception of my data in the second AD element. What have I to do to receive both (or even more) AD elements? What is the intention here - to have several calls of scan_recv for every AD element or to have a list of buffers or something else?

[Simonr]

Hi

The nrt_buf_simple_max_len value is set depending on the number of bytes bening reserved as headroom, and shows how many bytes are usable behind the net_buf_simple data pointer. So the reason this is different in different applications is that the header size varies in size depending on the application. 

Best regards,

Simon

[axel_s]

Hi Simonr,

thanks for the explanation. But it doesn't help to understand what happens. I'm able to send up to 249 data bytes in extended advertising (one AD element containing the data), I can monitor these bytes in the AUX_ADV_IND frame with the sniffer. Why I can't receive them? Currently, I can receive 227 data bytes only. The whole frame in BB is only 244 bytes long in that case, which is less than I would expect as maximum size from the BT specs. How can I extend the data size in reception to the 249 bytes I can send? Why there is a difference between the TX and RX?

Best regards

Axel