nrf5340 bricked after being programmed with a Mac M1

[Diego]

Hello,

We have a pre-production design of a custom board that has an nRF5340 on it. We have built and programmed about 60 boards of this design without any issues using Macs with Intel processors. Yesterday, we tried to program two boards using an M1 Mac which resulted in the devices getting stuck in a state were we can't even erase them or recover them using nrfjprog. JLinkExe also fails to connect. We have the latest nRF Command line tools as well as the latest JLink binaries but haven’t been able to recover these devices. Are you aware of any issues programming nRF5340 with M1 Macs? I've attached the logs from nrfjprog -f NRF53 --log --eraseall and nrfjprog -f NRF53 --log --recover. Voltage levels look (VTref=3.315V) fine and we have RESET pulled high through a 10k ohm resistor.

I should also note that the same M1 laptop is able to program nRF52s without any issues.

Any guidance would be appreciated.

Thanks,

Diego

Fullscreen JLinkExe.log Download

T16742E00 124:775.666   SEGGER J-Link V7.66b Log File
T16742E00 124:776.278   DLL Compiled: May 30 2022 14:07:53
T16742E00 124:776.299   Logging started @ 2022-06-07 22:04
T16742E00 124:776.316 - 124776.324ms
T16742E00 127:427.497 JLINK_ExecCommand("device=nrf5340", ...). 
T16742E00 127:428.543   Device "NRF5340_XXAA_APP" selected.
T16742E00 127:428.869 - 1.321ms returns 0x00
T16742E00 127:428.892 JLINK_EnableLog(...)
T16742E00 127:428.915 - 0.031ms
T16742E00 127:428.940 JLINK_GetEmuCaps()
T16742E00 127:428.957 - 0.025ms returns 0xB9FF7BBF
T16742E00 127:428.974 JLINK_TIF_GetAvailable(...)
T16742E00 127:429.223 - 0.274ms
T16742E00 127:429.260 JLINK_TIF_Select(JLINKARM_TIF_SWD)
T16742E00 127:429.277 - 0.026ms returns 0x00
T16742E00 127:429.300 JLINK_IsConnected()
T16742E00 127:429.322 - 0.030ms returns FALSE
T16742E00 127:429.339 JLINK_SetSpeed(4000)
T16742E00 127:429.461 - 0.145ms
T16742E00 127:429.496 JLINK_Connect()
T16742E00 127:431.249   ConfigTargetSettings() start
T16742E00 127:431.288    J-Link Script File: Executing ConfigTargetSettings()
T16742E00 127:431.312   ConfigTargetSettings() end
T16742E00 127:431.344   InitTarget() start
T16742E00 127:431.370    J-Link Script File: Executing InitTarget()
T16742E00 127:433.302   InitTarget() end
T16742E00 127:541.123   Failed to attach to CPU. Trying connect under reset.
T16742E00 128:148.939   ConfigTargetSettings() start
T16742E00 128:149.010    J-Link Script File: Executing ConfigTargetSettings()
T16742E00 128:149.044   ConfigTargetSettings() end
T16742E00 128:149.083   InitTarget() start
T16742E00 128:149.114    J-Link Script File: Executing InitTarget()
T16742E00 128:154.317   InitTarget() end
T16742E00 128:262.867 - 833.455ms returns 0xFFFFFFFF
T16742E00 128:262.996 JLINK_GetIdData(pIdData)
T16742E00 128:263.508   ConfigTargetSettings() start
T16742E00 128:263.596    J-Link Script File: Executing ConfigTargetSettings()
T16742E00 128:263.644   ConfigTargetSettings() end
T16742E00 128:263.701   InitTarget() start
T16742E00 128:263.748    J-Link Script File: Executing InitTarget()
T16742E00 128:269.680   InitTarget() end
T16742E00 128:448.975   ConfigTargetSettings() start
T16742E00 128:449.080    J-Link Script File: Executing ConfigTargetSettings()
T16742E00 128:449.129   ConfigTargetSettings() end
T16742E00 128:449.187   InitTarget() start
T16742E00 128:449.236    J-Link Script File: Executing InitTarget()
T16742E00 128:454.857   InitTarget() end
T16742E00 128:564.093 - 301.181ms
T16742E00 137:575.738 JLINK_IsOpen()
T16742E00 137:575.780 - 0.050ms returns 0x01
T16742E00 137:593.123 JLINK_Close()
T16742E00 137:609.442 - 16.362ms
T16742E00 137:609.905   
T16742E00 137:609.943   Closed

Fullscreen 6735.recover.log Download

[2022-Jun-07 17:46:10] [ info] --------------------------------------------------------------------------------
[2022-Jun-07 17:46:10] [ info] nrfjprog -f NRF53 --log --recover 
[2022-Jun-07 17:46:10] [ info] nrfjprog version 10.16.0 external
[2022-Jun-07 17:46:10] [ info] --------------------------------------------------------------------------------
[2022-Jun-07 17:46:10] [ info] Load library at /Applications/Nordic Semiconductor/lib/libnrfjprogdll.dylib.
[2022-Jun-07 17:46:10] [ info] Library loaded, loading member functions.
[2022-Jun-07 17:46:10] [ info] Member functions succesfully loaded.
[2022-Jun-07 17:46:10] [debug] [ Client] - open
[2022-Jun-07 17:46:10] [debug] [ Client] - start
[2022-Jun-07 17:46:10] [ info] [ Client] - stdout: Jlinkarm nRF Worker ready. Handling sequence 0f70ca96-e19c-42c4-a771-ce9723526aed.
[2022-Jun-07 17:46:10] [trace] [ Client] - Command open executed for 6 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [ Client] - enum_emu_snr
[2022-Jun-07 17:46:10] [trace] [ Client] - Command enum_emu_con_info executed for 3 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [ Client] - connect_to_emu_with_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Logger sink registered in Segger backend logger
[2022-Jun-07 17:46:10] [debug] [  JLink] - Logger sink registered in JLink logger
[2022-Jun-07 17:46:10] [debug] [  nRF53] - open
[2022-Jun-07 17:46:10] [debug] [  nRF53] - just_check_family
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - open_dll
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - No J-Link DLL path was provided. Attempting to auto detect.
[2022-Jun-07 17:46:10] [ info] [SeggerBackend] - Load library at /Applications/SEGGER/JLink/libjlinkarm.7.66.2.dylib.
[2022-Jun-07 17:46:10] [ info] [SeggerBackend] - Library loaded, loading member functions.
[2022-Jun-07 17:46:10] [ info] [SeggerBackend] - Member functions succesfully loaded.
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - dll_version
[2022-Jun-07 17:46:10] [ info] [SeggerBackend] - Segger dll version 7.66.b loaded.
[2022-Jun-07 17:46:10] [trace] [ Worker] - Command open executed for 3 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [  nRF53] - enum_emu_con_info
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - enum_emu_con_info
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:10] [trace] [ Worker] - Command enum_emu_con_info executed for 3 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [  nRF53] - connect_to_emu_with_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - connect_to_emu_with_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_get_num_emus
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_connect_to_emu_with_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_connect_to_emu_without_snr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Segger logging enabled.
[2022-Jun-07 17:46:10] [trace] [  JLink] - Firmware: J-Link V10 compiled Nov  2 2021 12:14:50
[2022-Jun-07 17:46:10] [trace] [  JLink] - Firmware: J-Link V10 compiled Nov  2 2021 12:14:50
[2022-Jun-07 17:46:10] [trace] [  JLink] - Decompressing FW timestamp took 161 us
[2022-Jun-07 17:46:10] [trace] [  JLink] - Hardware: V10.10
[2022-Jun-07 17:46:10] [trace] [  JLink] - S/N: 50102325
[2022-Jun-07 17:46:10] [trace] [  JLink] - OEM: SEGGER
[2022-Jun-07 17:46:10] [trace] [  JLink] - Feature(s): GDB
[2022-Jun-07 17:46:10] [trace] [  JLink] - TELNET listener socket opened on port 19021
[2022-Jun-07 17:46:10] [trace] [  JLink] - WEBSRV WEBSRV_Init(): Starting webserver thread(s)
[2022-Jun-07 17:46:10] [trace] [  JLink] - WEBSRV Webserver running on local port 19080
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 11.344ms returns "O.K."  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_Lock()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_ExecCommand("SetRestartOnClose = 0", ...).   
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.004ms returns 0x01  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_ExecCommand("DisableFlashDL", ...).   
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.003ms returns 0x00  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_ExecCommand("ExcludeFlashCacheRange 0x0-0xFFFFFFFF", ...).   
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.001ms returns 0x00  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_SetHookUnsecureDialog  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_SetHookUnsecureDialog(...)
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.008ms returns 0  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_TIF_Select(JLINKARM_TIF_SWD)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.724ms returns 0x00  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_GetSpeedInfo()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - 180000000 Hz / n, n >= 12
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.007ms  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Connected emulator supports SWD speeds up to 15000kHz
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_SetSpeed(2000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.132ms  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_GetSpeed()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.003ms returns 2000  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - SWD clock set to 2000kHz
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_GetSN()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.003ms returns 50102325  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - read_debug_port_idr
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - read_debug_port_register
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_read_debug_port_register
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - coresight_configure
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_GetHWStatus(...)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.199ms returns 0  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_Configure()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 100.570ms returns 0  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_select_debug_port_register
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Select AP 255, DP Bank 0, AP Bank 255
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.459ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.470ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.480ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.468ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.502ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.549ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.467ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.483ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.481ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.469ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.534ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [ Client] - Command connect_to_emu_with_snr executed for 161 milliseconds with result -102
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.497ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.500ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.467ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.456ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.491ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.513ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.587ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.524ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.427ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.428ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.448ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.421ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.427ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.421ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.429ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.466ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.545ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.408ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.428ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.012ms  
[2022-Jun-07 17:46:10] [trace] [ Worker] - Command connect_to_emu_with_snr executed for 161 milliseconds with result -102
[2022-Jun-07 17:46:10] [debug] [  nRF53] - close
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_IsOpen()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.003ms returns 0x01  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_Lock()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - close
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - disconnect_from_emu
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_disconnect_from_emu
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - is_connected_to_device
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_IsConnected()  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.002ms returns FALSE  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_is_debug_region_powered
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_read_debug_port_register
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_select_debug_port_register
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Select AP 255, DP Bank 0, AP Bank 255
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.431ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.453ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.460ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.532ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.427ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.447ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.478ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.434ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.472ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.513ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.424ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.504ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.428ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.489ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.428ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.423ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.443ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.454ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.551ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.439ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.424ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.435ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.453ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.450ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.461ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.478ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.435ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.421ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.474ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.446ms returns -1  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:10] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:10] [trace] [  JLink] - - 0.011ms  
[2022-Jun-07 17:46:10] [trace] [  JLink] - JLINK_Close()  
[2022-Jun-07 17:46:10] [trace] [ Client] - Command close executed for 43 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [ Client] - terminate
[2022-Jun-07 17:46:10] [trace] [ Client] - Command terminate executed for 0 milliseconds with result 0
[2022-Jun-07 17:46:10] [debug] [SeggerBackend] - Segger Backend closed.
[2022-Jun-07 17:46:10] [debug] [  nRF53] - nRF family DLL closed
[2022-Jun-07 17:46:10] [trace] [ Worker] - Command close executed for 43 milliseconds with result 0
[2022-Jun-07 17:46:10] [trace] [ Worker] - Command terminate executed for 0 milliseconds with result 0
[2022-Jun-07 17:46:10] [trace] [ Worker] - Executed 5 commands for 210 milliseconds
[2022-Jun-07 17:46:10] [debug] [ Client] - Child process terminated with result 0
[2022-Jun-07 17:46:10] [debug] [ Client] - Worker process exited with code: 0
[2022-Jun-07 17:46:10] [debug] [ Client] - Worker process exited with code: 0
[2022-Jun-07 17:46:10] [trace] [ Client] - Executed 5 commands for 213 milliseconds
[2022-Jun-07 17:46:10] [debug] [ Client] - terminate

Fullscreen erase.log Download

[2022-Jun-07 17:46:28] [ info] --------------------------------------------------------------------------------
[2022-Jun-07 17:46:28] [ info] nrfjprog -f NRF53 --log --eraseall 
[2022-Jun-07 17:46:28] [ info] nrfjprog version 10.16.0 external
[2022-Jun-07 17:46:28] [ info] --------------------------------------------------------------------------------
[2022-Jun-07 17:46:28] [ info] Load library at /Applications/Nordic Semiconductor/lib/libnrfjprogdll.dylib.
[2022-Jun-07 17:46:28] [ info] Library loaded, loading member functions.
[2022-Jun-07 17:46:28] [ info] Member functions succesfully loaded.
[2022-Jun-07 17:46:28] [debug] [ Client] - open
[2022-Jun-07 17:46:28] [debug] [ Client] - start
[2022-Jun-07 17:46:28] [ info] [ Client] - stdout: Jlinkarm nRF Worker ready. Handling sequence 19e626c9-fea6-430d-828d-cc0168464861.
[2022-Jun-07 17:46:28] [trace] [ Client] - Command open executed for 16 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [ Client] - enum_emu_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Logger sink registered in Segger backend logger
[2022-Jun-07 17:46:28] [debug] [  JLink] - Logger sink registered in JLink logger
[2022-Jun-07 17:46:28] [debug] [  nRF53] - open
[2022-Jun-07 17:46:28] [debug] [  nRF53] - just_check_family
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - open_dll
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - No J-Link DLL path was provided. Attempting to auto detect.
[2022-Jun-07 17:46:28] [ info] [SeggerBackend] - Load library at /Applications/SEGGER/JLink/libjlinkarm.7.66.2.dylib.
[2022-Jun-07 17:46:28] [ info] [SeggerBackend] - Library loaded, loading member functions.
[2022-Jun-07 17:46:28] [ info] [SeggerBackend] - Member functions succesfully loaded.
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - dll_version
[2022-Jun-07 17:46:28] [ info] [SeggerBackend] - Segger dll version 7.66.b loaded.
[2022-Jun-07 17:46:28] [trace] [ Worker] - Command open executed for 13 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [  nRF53] - enum_emu_con_info
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - enum_emu_con_info
[2022-Jun-07 17:46:28] [trace] [ Client] - Command enum_emu_con_info executed for 3 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [ Client] - connect_to_emu_with_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:28] [trace] [ Worker] - Command enum_emu_con_info executed for 3 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [  nRF53] - connect_to_emu_with_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - connect_to_emu_with_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_get_num_emus
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_connect_to_emu_with_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_connect_to_emu_without_snr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Segger logging enabled.
[2022-Jun-07 17:46:28] [trace] [  JLink] - Firmware: J-Link V10 compiled Nov  2 2021 12:14:50
[2022-Jun-07 17:46:28] [trace] [  JLink] - Firmware: J-Link V10 compiled Nov  2 2021 12:14:50
[2022-Jun-07 17:46:28] [trace] [  JLink] - Decompressing FW timestamp took 132 us
[2022-Jun-07 17:46:28] [trace] [  JLink] - Hardware: V10.10
[2022-Jun-07 17:46:28] [trace] [  JLink] - S/N: 50102325
[2022-Jun-07 17:46:28] [trace] [  JLink] - OEM: SEGGER
[2022-Jun-07 17:46:28] [trace] [  JLink] - Feature(s): GDB
[2022-Jun-07 17:46:28] [trace] [  JLink] - TELNET listener socket opened on port 19021
[2022-Jun-07 17:46:28] [trace] [  JLink] - WEBSRV WEBSRV_Init(): Starting webserver thread(s)
[2022-Jun-07 17:46:28] [trace] [  JLink] - WEBSRV Webserver running on local port 19080
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 12.621ms returns "O.K."  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_Lock()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_ExecCommand("SetRestartOnClose = 0", ...).   
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.005ms returns 0x01  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_ExecCommand("DisableFlashDL", ...).   
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.003ms returns 0x00  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_ExecCommand("ExcludeFlashCacheRange 0x0-0xFFFFFFFF", ...).   
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.001ms returns 0x00  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_SetHookUnsecureDialog  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_SetHookUnsecureDialog(...)
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.008ms returns 0  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_TIF_Select(JLINKARM_TIF_SWD)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.720ms returns 0x00  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_GetSpeedInfo()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - 180000000 Hz / n, n >= 12
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.005ms  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Connected emulator supports SWD speeds up to 15000kHz
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_SetSpeed(2000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.138ms  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_GetSpeed()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.002ms returns 2000  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - SWD clock set to 2000kHz
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_GetSN()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.002ms returns 50102325  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - read_debug_port_idr
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - read_debug_port_register
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_read_debug_port_register
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - coresight_configure
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_GetHWStatus(...)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.199ms returns 0  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_Configure()  
[2022-Jun-07 17:46:28] [trace] [ Client] - Command connect_to_emu_with_snr executed for 158 milliseconds with result -102
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 100.280ms returns 0  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_select_debug_port_register
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Select AP 255, DP Bank 0, AP Bank 255
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.436ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.418ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.486ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.481ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.485ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.487ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.479ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.442ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.487ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.444ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.494ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.460ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.475ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.470ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.445ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.465ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.448ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.449ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.426ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.462ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.468ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.443ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.507ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.445ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.444ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.480ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.411ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.456ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.433ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.416ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.012ms  
[2022-Jun-07 17:46:28] [trace] [ Worker] - Command connect_to_emu_with_snr executed for 158 milliseconds with result -102
[2022-Jun-07 17:46:28] [debug] [  nRF53] - close
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_emu
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_IsOpen()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.006ms returns 0x01  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_Lock()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - close
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - disconnect_from_emu
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_disconnect_from_emu
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - is_connected_to_device
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_IsConnected()  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.002ms returns FALSE  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_is_debug_region_powered
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_read_debug_port_register
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_select_debug_port_register
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Select AP 255, DP Bank 0, AP Bank 255
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.476ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.506ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.469ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.507ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.467ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.432ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.456ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.427ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.414ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.544ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.487ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.503ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.486ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.438ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.478ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.451ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.427ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.466ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.429ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.552ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.492ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.418ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.430ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.493ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x02, 0x00000000)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.444ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - ---just_abort_debug_action
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Attempting to clear any configuration errors in debug port before closing connection. 
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.482ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.456ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.413ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.479ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_CORESIGHT_WriteAPDPReg(DP reg 0x00, 0x0000001F)  
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.420ms returns -1  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_HasError()  
[2022-Jun-07 17:46:28] [error] [SeggerBackend] - JLinkARM.dll reported "-1", "An unknown error.".
[2022-Jun-07 17:46:28] [trace] [  JLink] - - 0.010ms  
[2022-Jun-07 17:46:28] [trace] [  JLink] - JLINK_Close()  
[2022-Jun-07 17:46:28] [trace] [ Client] - Command close executed for 51 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [ Client] - terminate
[2022-Jun-07 17:46:28] [trace] [ Client] - Command terminate executed for 0 milliseconds with result 0
[2022-Jun-07 17:46:28] [debug] [SeggerBackend] - Segger Backend closed.
[2022-Jun-07 17:46:28] [debug] [  nRF53] - nRF family DLL closed
[2022-Jun-07 17:46:28] [trace] [ Worker] - Command close executed for 51 milliseconds with result 0
[2022-Jun-07 17:46:28] [trace] [ Worker] - Command terminate executed for 0 milliseconds with result 0
[2022-Jun-07 17:46:28] [trace] [ Worker] - Executed 5 commands for 225 milliseconds
[2022-Jun-07 17:46:28] [debug] [ Client] - Worker process exited with code: 0
[2022-Jun-07 17:46:28] [debug] [ Client] - Worker process exited with code: 0
[2022-Jun-07 17:46:28] [debug] [ Client] - Tried to wait on already ended process: wait error: No child processes
[2022-Jun-07 17:46:28] [debug] [ Client] - Child process terminated with result 0
[2022-Jun-07 17:46:28] [trace] [ Client] - Executed 5 commands for 228 milliseconds
[2022-Jun-07 17:46:28] [debug] [ Client] - terminate

[Jared]

Hi there,

When you program the board, what voltage do you measure directly on:

1. RESET pin
2. VDD pins

regards
Jared 

[Diego]

Hi Jared,

3.3V on both. I doubt it’s a hardware issue as other boards from the same run work fine. It’s like programming them with the M1 caused the debug port to lock.

Thanks,

Diego

[Jared]

Hi,

I don't see any reasons for Mac being the culprit. Do you have external inductors for the DC/DC on your custom board? Could you share your schematics? I can convert the case to private first if you prefer it.

regards

Jared