Just to be sure, despite setting a higher SDU Interval, lower RTN and the bt_iso_chan_io_qos.phy to BT_GAP_LE_PHY_CODED, what else does one need to change (kconf, ...) to enable the coded phy in this ISO supporting controller in general? Because if you only change the things mentioned before, the the BIG creation will fail with error -5 = I/O error.
Just to be sure, despite setting a higher SDU Interval, lower RTN and the bt_iso_chan_io_qos.phy to BT_GAP_LE_PHY_CODED, what else does one need to change (kconf, ...) to enable the coded phy in this ISO supporting controller in general? Because if you only change the things mentioned before, the the BIG creation will fail with error -5 = I/O error.
thanks for your answer but this doesn't make a difference. Especially given that the nrf5340_audio we are talking about is using the provided Nordic/Packetcraft controller.
Hi Theo, Sorry for the delayed response. We currently have the vacation period here and are understaffed at the moment.
The PCFT controller does unfortunately not support coded PHY yet, so this is not possible with the PCFT controller at the moment. If you have any questions about roadmaps or future releases you will have to contact your RSM with these questions, since we do not discuss roadmaps or future releases here in the DevZone forum.
