peerManagerInit() has called pm_init() and setting security parameters. But nRF connect shows "Unencrypted link". How can I enabled encrypted link in nRF52832 firmware?
int main(void) {
...
peerManagerInit(true);
gapParamsInit();
...
}
peerManagerInit() has called pm_init() and setting security parameters. But nRF connect shows "Unencrypted link". How can I enabled encrypted link in nRF52832 firmware?
int main(void) {
...
peerManagerInit(true);
gapParamsInit();
...
}
#include "sdk_config.h"
#include "advertising.h"
#include "ble_conn_state.h"
#include "error.h"
#include "fds.h"
#include "nrf_log.h"
#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "peer_manager_types.h"
#include "security.h"
#if 0 // nrf51
#define SEC_PARAM_TIMEOUT 30 /**< Timeout for Pairing Request or Security Request (in seconds). */
#define SEC_PARAM_BOND 1 /**< Perform bonding. */
#define SEC_PARAM_MITM 1 /**< Man In The Middle protection not required. */
#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_DISPLAY_ONLY /**< No I/O capabilities. */
#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */
#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */
#define SEC_PARAM_LESC 0
#define SEC_PARAM_KEYPRESS 0
#else
#define SEC_PARAM_BOND 1 /**< Perform bonding. */
#define SEC_PARAM_MITM 0 /**< Man In The Middle protection required (applicable when display module is detected). */
#define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */
#define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */
#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */
#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */
#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */
#endif
static void _pmEvtHandler(pm_evt_t const * pEvt) {
ret_code_t errCode;
switch (pEvt->evt_id) {
case PM_EVT_BONDED_PEER_CONNECTED:
{
NRF_LOG_INFO("Connected to a previously bonded device.");
} break;
case PM_EVT_CONN_SEC_SUCCEEDED:
{
NRF_LOG_INFO("Connection secured: role: %d, conn_handle: 0x%x, procedure: %d.",
ble_conn_state_role(pEvt->conn_handle),
pEvt->conn_handle,
pEvt->params.conn_sec_succeeded.procedure);
} break;
case PM_EVT_CONN_SEC_FAILED:
{
NRF_LOG_INFO("Faield to secure connection with handle 0%x.", pEvt->conn_handle);
errCode = sd_ble_gap_disconnect(pEvt->conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
if (errCode != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(errCode);
}
//pEvt->conn_handle = BLE_CONN_HANDLE_INVALID;
/* Often, when securing fails, it shouldn't be restarted, for security reasons.
* Other times, it can be restarted directly.
* Sometimes it can be restarted, but only after changing some Security Parameters.
* Sometimes, it cannot be restarted until the link is disconnected and reconnected.
* Sometimes it is impossible, to secure the link, or the peer device does not support it.
* How to handle this error is highly application dependent. */
} break;
case PM_EVT_CONN_SEC_CONFIG_REQ:
{
// Reject pairing request from an already bonded peer.
pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false};
pm_conn_sec_config_reply(pEvt->conn_handle, &conn_sec_config);
} break;
case PM_EVT_STORAGE_FULL:
{
// Run garbage collection on the flash.
errCode = fds_gc();
if (errCode == FDS_ERR_NO_SPACE_IN_QUEUES)
{
// Retry.
}
else
{
APP_ERROR_CHECK(errCode);
}
} break;
case PM_EVT_PEERS_DELETE_SUCCEEDED:
{
NRF_LOG_DEBUG("PM_EVT_PEERS_DELETE_SUCCEEDED");
advertisingStart();
} break;
case PM_EVT_PEER_DATA_UPDATE_FAILED:
{
// Assert.
APP_ERROR_CHECK(pEvt->params.peer_data_update_failed.error);
} break;
case PM_EVT_PEER_DELETE_FAILED:
{
// Assert.
APP_ERROR_CHECK(pEvt->params.peer_delete_failed.error);
} break;
case PM_EVT_PEERS_DELETE_FAILED:
{
// Assert.
APP_ERROR_CHECK(pEvt->params.peers_delete_failed_evt.error);
} break;
case PM_EVT_ERROR_UNEXPECTED:
{
// Assert.
APP_ERROR_CHECK(pEvt->params.error_unexpected.error);
} break;
case PM_EVT_CONN_SEC_START:
case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED:
case PM_EVT_PEER_DELETE_SUCCEEDED:
case PM_EVT_LOCAL_DB_CACHE_APPLIED:
case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED:
// This can happen when the local DB has changed.
case PM_EVT_SERVICE_CHANGED_IND_SENT:
case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED:
default:
break;
}
}
/**@brief Function for the Peer Manager initialization.
*/
int peerManagerInit(const bool eraseBonds) {
ble_gap_sec_params_t secParam;
ret_code_t errCode;
errCode = pm_init();
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("pm_init() failed, errCode=0x%x\n", errCode);
return ERROR_PEER_MANAGER_INITIALIZE_FAIL;
}
if (eraseBonds) {
errCode = pm_peers_delete();
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("pm_peers_delete() failed, errCode=0x%x\n", errCode);
return ERROR_PEER_MANAGER_INITIALIZE_FAIL;
}
}
memset(&secParam, 0, sizeof(ble_gap_sec_params_t));
// Security parameters to be used for all security procedures.
secParam.bond = SEC_PARAM_BOND;
secParam.mitm = SEC_PARAM_MITM;
secParam.lesc = SEC_PARAM_LESC;
secParam.keypress = SEC_PARAM_KEYPRESS;
secParam.io_caps = SEC_PARAM_IO_CAPABILITIES;
secParam.oob = SEC_PARAM_OOB;
secParam.min_key_size = SEC_PARAM_MIN_KEY_SIZE;
secParam.max_key_size = SEC_PARAM_MAX_KEY_SIZE;
secParam.kdist_own.enc = 1;
secParam.kdist_own.id = 1;
secParam.kdist_peer.enc = 1;
secParam.kdist_peer.id = 1;
errCode = pm_sec_params_set(&secParam);
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("pm_sec_params_set() failed, errCode=0x%x\n", errCode);
return ERROR_PEER_MANAGER_INITIALIZE_FAIL;
}
errCode = pm_register(_pmEvtHandler);
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("pm_register() failed, errCode=0x%x\n", errCode);
return ERROR_PEER_MANAGER_INITIALIZE_FAIL;
}
return 0;
}
#include "sdk_config.h"
#include "ble.h"
#include "ble_conn_params.h"
#include "ble_gap.h"
#include "gap.h"
#include "error.h"
#include "nrf_log.h"
#define DEVICE_NAME "ANCS2" /**< Name of the device. Will be included in the advertising data. */
#define STATIC_PASSKEY "123456" /**< Static passkey. */
#define MIN_CONN_INTERVAL MSEC_TO_UNITS(15, UNIT_1_25_MS) /**< Minimum acceptable connection interval (0.5 seconds). */
#define MAX_CONN_INTERVAL MSEC_TO_UNITS(30, UNIT_1_25_MS) /**< Maximum acceptable connection interval (1 second). */
#define SLAVE_LATENCY 0 /**< Slave latency. */
#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(3000, UNIT_10_MS) /**< Connection supervisory time-out (4 seconds). */
static ble_opt_t _gStaticPasskeyOption; /**< Pointer to the struct containing static pin option. */
/**@brief Function for initializing GAP connection parameters.
*
* @details Use this function to set up all necessary GAP (Generic Access Profile)
* parameters of the device. It also sets the permissions and appearance.
*/
int gapParamsInit(void) {
ret_code_t errCode;
ble_gap_conn_params_t gapConnParams;
ble_gap_conn_sec_mode_t secMode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&secMode);
errCode = sd_ble_gap_device_name_set(&secMode, (const uint8_t *)DEVICE_NAME, strlen(DEVICE_NAME));
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("sd_ble_gap_device_name_set() failed, errCode=0x%x", errCode);
return ERROR_GAP_INITIALIZE_FAIL;
}
memset(&gapConnParams, 0, sizeof(gapConnParams));
gapConnParams.min_conn_interval = MIN_CONN_INTERVAL;
gapConnParams.max_conn_interval = MAX_CONN_INTERVAL;
gapConnParams.slave_latency = SLAVE_LATENCY;
gapConnParams.conn_sup_timeout = CONN_SUP_TIMEOUT;
errCode = sd_ble_gap_ppcp_set(&gapConnParams);
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("sd_ble_gap_ppcp_set() failed, errCode=0x%x", errCode);
return ERROR_GAP_INITIALIZE_FAIL;
}
uint8_t passkey[] = STATIC_PASSKEY;
_gStaticPasskeyOption.gap_opt.passkey.p_passkey = passkey;
errCode = sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &_gStaticPasskeyOption);
if (errCode != NRF_SUCCESS) {
NRF_LOG_WARNING("sd_ble_opt_set() failed, errCode=0x%x", errCode);
return ERROR_GAP_INITIALIZE_FAIL;
}
return 0;
}
Edvin said:in SDK17.1.0, you can see how the ble_app_hrs example calls pm_conn_secure() in the BLE_GAP_EVT_CONNECTED event in ble_evt_handler() in main.c.
Edvin said:in SDK17.1.0, you can see how the ble_app_hrs example calls pm_conn_secure() in the BLE_GAP_EVT_CONNECTED event in ble_evt_handler() in main.c.
