Why does NVS sometimes erase sector during initialization?

Hi,

I've met a problem. It seems NVS sometimes erases sector during initialization.

As shown in following log, I wrote 2 datas(address, slot) in NVS. Normally, I can read both of these data after a reset. But sometimes, the data will be erased as log shown.

00> *** Booting Zephyr OS build v2.7.99-ncs1-1  ***
00> 
00> [00:00:00.004,516] <inf> main: ** Example start **
00> [00:00:00.009,338] <inf> pal_interrupt: Set up button IRQ at GPIO_0 pin 13
00> [00:00:00.016,235] <inf> pal_interrupt: Set up dw3k IRQ at GPIO_1 pin 9.
00> [00:00:00.022,979] <inf> pal_spi: SPI INIT DONE: SCK 4, MISO 5, MOSI 6, CS: 7.
00> [00:00:00.030,487] <dbg> fs_nvs.nvs_recover_last_ate: Recovering last ate from sector 1
00> [00:00:00.045,166] <inf> fs_nvs: 6 Sectors of 4096 bytes
00> [00:00:00.050,445] <inf> fs_nvs: alloc wra: 1, fe0
00> [00:00:00.055,175] <inf> fs_nvs: data wra: 1, 10
00> [00:00:00.060,577] <inf> sdc_hci_driver: SoftDevice Controller build revision: 
00>                                          0e e7 c5 66 67 18 3c ac  b3 d2 cc 81 a3 dc f1 c0 |...fg.<. ........
00>                                          c0 36 02 22                                      |.6."             
00> [00:00:00.092,895] <inf> bt_hci_core: No ID address. App must call settings_load()
00> [00:00:00.100,463] <inf> ble_utils: Bluetooth initialized
00> [00:00:00.112,792] <inf> nvs_utils: Offset: 0xfa000
00> [00:00:00.117,645] <dbg> fs_nvs.nvs_recover_last_ate: Recovering last ate from sector 1
00> [00:00:00.134,033] <inf> fs_nvs: No GC Done marker found: restarting gc
00> [00:00:00.140,625] <dbg> fs_nvs.nvs_flash_erase_sector: Erasing flash at fb000, len 4096
00> [00:00:00.314,178] <dbg> fs_nvs.nvs_gc: Moving 49153, len 16
00> [00:00:00.334,899] <dbg> fs_nvs.nvs_gc: Moving 2, len 2
00> [00:00:00.341,949] <dbg> fs_nvs.nvs_gc: Moving 1, len 12
00> [00:00:00.349,243] <dbg> fs_nvs.nvs_gc: Moving 32768, len 2
00> [00:00:00.356,658] <dbg> fs_nvs.nvs_gc: Moving 32769, len 7
00> [00:00:00.364,715] <dbg> fs_nvs.nvs_add_gc_done_ate: Adding gc done ate at fc8
00> [00:00:00.372,558] <dbg> fs_nvs.nvs_flash_erase_sector: Erasing flash at fa000, len 4096
00> [00:00:00.521,759] <inf> fs_nvs: 2 Sectors of 4096 bytes
00> [00:00:00.527,038] <inf> fs_nvs: alloc wra: 1, fc0
00> [00:00:00.531,768] <inf> fs_nvs: data wra: 1, 2c
00> Id: 1, Address: 192.168.1.1
00> 
00> Id: 2, SLOT: 0xabcd.
00> 
00> *** Booting Zephyr OS build v2.7.99-ncs1-1  ***
00> 
00> [00:00:00.004,516] <inf> main: ** Example start **
00> [00:00:00.009,338] <inf> pal_interrupt: Set up button IRQ at GPIO_0 pin 13
00> [00:00:00.016,235] <inf> pal_interrupt: Set up dw3k IRQ at GPIO_1 pin 9.
00> [00:00:00.023,010] <inf> pal_spi: SPI INIT DONE: SCK 4, MISO 5, MOSI 6, CS: 7.
00> [00:00:00.030,578] <dbg> fs_nvs.nvs_recover_last_ate: Recovering last ate from sector 0
00> [00:00:00.042,114] <inf> fs_nvs: No GC Done marker found: restarting gc
00> [00:00:00.048,706] <dbg> fs_nvs.nvs_flash_erase_sector: Erasing flash at fa000, len 4096
00> [00:00:00.142,974] <dbg> fs_nvs.nvs_add_gc_done_ate: Adding gc done ate at ff0
00> [00:00:00.150,817] <dbg> fs_nvs.nvs_flash_erase_sector: Erasing flash at fb000, len 4096
00> [00:00:00.245,117] <inf> fs_nvs: 6 Sectors of 4096 bytes
00> [00:00:00.250,396] <inf> fs_nvs: alloc wra: 0, fe8
00> [00:00:00.255,126] <inf> fs_nvs: data wra: 0, 0
00> [00:00:00.259,735] <inf> sdc_hci_driver: SoftDevice Controller build revision: 
00>                                          0e e7 c5 66 67 18 3c ac  b3 d2 cc 81 a3 dc f1 c0 |...fg.<. ........
00>                                          c0 36 02 22                                      |.6."             
00> [00:00:00.292,114] <inf> bt_hci_core: No ID address. App must call settings_load()
00> [00:00:00.299,682] <inf> ble_utils: Bluetooth initialized
00> [00:00:00.312,072] <inf> nvs_utils: Offset: 0xfa000
00> [00:00:00.317,016] <dbg> fs_nvs.nvs_recover_last_ate: Recovering last ate from sector 0
00> [00:00:00.335,632] <inf> fs_nvs: 2 Sectors of 4096 bytes
00> [00:00:00.340,911] <inf> fs_nvs: alloc wra: 0, fc8
00> [00:00:00.345,642] <inf> fs_nvs: data wra: 0, 2c
00> No address found, adding 192.168.1.1 at id 1
00> 
00> No slot found, adding it at id 2.

Why does this happen? How can I fix it?

NCS version: 1.9.1

Looking forward to your reply.

Joyop

Parents
  • It seems something is not correct in terms of writing to the page and doing a systemreset right after (with some delay).

    I  have edited your nvs_test function to read just after write and i do not see that behavior.

    //NVS test
    #if 1
    #define ADDRESS_ID 1
    #define SLOT_ID 2
    #define ANTD_ID 3
    void nvs_test(void)
    {
        int rc = 0;
        char buf[16];
        uint16_t slot = 0;
        uint16_t antd = 0;
        // uint8_t slot[8] = {0};
        // uint8_t antd[8] = {0};
    
    	/* ADDRESS_ID is used to store an address, lets see if we can
    	 * read it from flash, since we don't know the size read the
    	 * maximum possible
    	 */
    	rc = nvs_read(&fs, ADDRESS_ID, &buf, sizeof(buf));
    	if (rc > 0) { /* item was found, show it */
    		printk("Id: %d, Address: %s\n", ADDRESS_ID, buf);
    	} else   {/* item was not found, add it */
    		strcpy(buf, "192.168.1.1");
    		printk("No address found, adding %s at id %d\n", buf,
    		       ADDRESS_ID);
    		(void)nvs_write(&fs, ADDRESS_ID, &buf, strlen(buf)+1);
    	}	
        rc = nvs_read(&fs, SLOT_ID, &slot, sizeof(slot));
    	if (rc > 0) { /* item was found, show it */
    		printk("Id: %d, SLOT: 0x%x.", SLOT_ID, slot);
    		printk("\n");
    	} else   {/* item was not found, add it */
    		printk("No slot found, adding it at id %d.\n", SLOT_ID);
    		slot = 0xabcd;
    		(void)nvs_write(&fs, SLOT_ID, &slot, sizeof(slot));
    
    	    printk("Second attempt to read slot_id and address, should NOT fail \n");
    		rc = nvs_read(&fs, ADDRESS_ID, &buf, sizeof(buf));
    		if (rc > 0) { /* item was found, show it */
    			printk("Id: %d, Address: %s\n", ADDRESS_ID, buf);
    		} else   {/* item was not found, add it */
    			LOG_ERR("No address found, adding %s at id %d\n", buf, ADDRESS_ID);
    		}	
    
    		rc = nvs_read(&fs, SLOT_ID, &slot, sizeof(slot));
    		if (rc > 0) { /* item was found, show it */
    			printk("Id: %d, SLOT: 0x%x.", SLOT_ID, slot);
    			printk("\n");
    		} else   {/* item was not found, add it */
    			LOG_ERR("No slot found, adding it at id %d.\n", SLOT_ID);
    		}
    	}
    
    	k_sleep(K_MSEC(3000));
    	NVIC_SystemReset();
    }

  • Thanks for your help!

    However, what I'm more interested in is why does it erase the flash sometimes like here:

    00> [00:00:00.217,010] <dbg> fs_nvs.nvs_flash_erase_sector: Erasing flash at fc000, len 4096

    Because I want to store some important settings in flash, without which my product cant work. So I don't want the risk of my product losing these settings after a reboot.

    I don't know if I make my requirement clear Slight smile. Looking forward to further discussion.

  • My guess is that doing a system reset right after flash write might be cause some strange behavior from garbage collection. I have run overnight your project with my suggested changes and I cannot see any erasing of your data.

Reply Children
Related