nRF9160 DK + Asset Tracker v2, AWS A-GPS

Hello!

I am having some GPS problems with the Asset tracker v2 firmware. It can find satellites, but it doesn't track them nor do I get a GPS fix before the timeout occurs. I was thinking to enable A-GPS to speed up the fix, but since I am connecting it to my own AWS IoT instance it doesn't seem to download any A-GPS data. How can I modify the asset tracker firmware so that it downloads A-GPS properly?

Some other info:

  • I have clear skies and open surroundings for the device
  • If I run the GNSS firmware it gets a GPS fix within 30 seconds, so I am suspecting some kind of interference with the modem. iBasis supports PSM in my area but it doesn't seem to be activated if I read it out via modem commands.
  • The original asset tracker firmware which connected to nRFcloud worked perfectly, so the device isn't faulty.

Thanks!

Parents Reply
  • Hi,

     

    MostlyHardware said:
    Can I still connect to nrfcloud even though I have certificates installed for my own AWS IoT server?

    You'll need certificates for nRFCloud as well.

    MostlyHardware said:
    I get the response: +CEREG: 5,5,"2B1C","01B2860A",7,,,"11100000","11100000".

    This is unfortunately bad news. You are not getting PSM in your current connected roaming network. I would suggest that you try to obtain a home registered SIM from your local network provider instead.

     

    Kind regards,

    Håkon

Children
Related