SERVER CONSOLE DEBUG: GDBServerConsole: onBackendConnect: gdb-server program client error Error: read ECONNRESET

[Emile]

Hi!

I'm developing a project on visual studio with ncs sdk V1.8.0. For a while, I was able to debug my project with no problem. But out of the blue, I'm no longer able to debug my project. I get the following error:

[2022-08-23T15:57:09.597Z] SERVER CONSOLE DEBUG: GDBServerConsole: onBackendConnect: gdb-server program client error Error: read ECONNRESET

There is the complete log: 

[2022-08-23T15:57:09.458Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session connected. You can switch to "DEBUG CONSOLE" to see GDB interactions.
"C:\\Program Files (x86)\\SEGGER\\JLink\\JLinkGDBServerCL.exe" -singlerun -nogui -if swd -port 50000 -swoport 50001 -telnetport 50002 -device nRF52832_xxAA -select usb=483066063 -rtos "C:\\Program Files (x86)\\SEGGER\\JLink\\GDBServer\\RTOSPlugin_Zephyr.dll"
SEGGER J-Link GDB Server V7.58b Command Line Version

JLinkARM.dll V7.58b (DLL compiled Nov 16 2021 15:00:10)

Command line: -singlerun -nogui -if swd -port 50000 -swoport 50001 -telnetport 50002 -device nRF52832_xxAA -select usb=483066063 -rtos C:\Program Files (x86)\SEGGER\JLink\GDBServer\RTOSPlugin_Zephyr.dll
-----GDB Server start settings-----
GDBInit file:                  none
GDB Server Listening port:     50000
SWO raw output listening port: 50001
Terminal I/O port:             50002
Accept remote connection:      localhost only
Generate logfile:              off
Verify download:               off
Init regs on start:            off
Silent mode:                   off
Single run mode:               on
Target connection timeout:     0 ms
------J-Link related settings------
J-Link Host interface:         USB
J-Link script:                 none
J-Link settings file:          none
------Target related settings------
Target device:                 nRF52832_xxAA
Target interface:              SWD
Target interface speed:        4000kHz
Target endian:                 little

Connecting to J-Link...
J-Link is connected.
Firmware: J-Link OB-SAM3U128 V3 compiled Feb  2 2021 16:48:08
Hardware: V3.00
S/N: 483066063
Checking target voltage...
Target voltage: 3.30 V
Listening on TCP/IP port 50000
Connecting to target...
[2022-08-23T15:57:09.597Z] SERVER CONSOLE DEBUG: GDBServerConsole: onBackendConnect: gdb-server program client error Error: read ECONNRESET
[2022-08-23T15:57:09.598Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session closed
GDB server session ended. This terminal will be reused, waiting for next session to start...

What is the problem? 

Thank you!

[Manuel]

Same here with NCS 1.7.0 on nRF52.

Here's the support information (sensitive information is blanked with _____):

{
"platform": {
"os": "win32",
"osVersion": "Windows 10 Enterprise",
"osKernel": "10.0.19044",
"vscode": "1.70.2",
"electron": "18.3.5",
"node": "v16.13.2"
},
"system": {
"date": "2022-08-24T10:21:01.844Z",
"vscodeRoot": "c:\\work\\tools\\Microsoft VS Code\\resources\\app",
"nrfConnectForDesktopInstalled": true,
"vscodeUptime": "01:02:17",
"osUptime": "01:02:57",
"cpu": {
"model": "Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz",
"speed": "1608 MHz",
"count": 6
},
"memory": {
"total": "63.78 GB",
"free": "54.79 GB"
}
},
"workspace": {
"name": "_____",
"workspaceFile": null,
"folders": [
"c:\\WORK\\_____"
]
},
"extensions": {
"internal": {
"nordic-semiconductor.nrf-connect": {
"version": "2022.7.242",
"path": "c:\\Users\\_____\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2022.7.242-win32-x64",
"isActive": true
},
"nordic-semiconductor.nrf-terminal": {
"version": "2022.7.21",
"path": "c:\\Users\\_____\\.vscode\\extensions\\nordic-semiconductor.nrf-terminal-2022.7.21",
"isActive": true
},
"nordic-semiconductor.nrf-devicetree": {
"version": "2022.7.36",
"path": "c:\\Users\\_____\\.vscode\\extensions\\nordic-semiconductor.nrf-devicetree-2022.7.36",
"isActive": true
},
"nordic-semiconductor.nrf-kconfig": {
"version": "2022.7.24",
"path": "c:\\Users\\_____\\.vscode\\extensions\\nordic-semiconductor.nrf-kconfig-2022.7.24",
"isActive": true
}
},
"external": {
"marus25.cortex-debug": "1.6.0",
"ms-vscode.cpptools": "1.11.5",
"ms-vscode-remote.remote-wsl-recommender": "0.0.15",
"ms-vscode.js-debug": "1.70.0",
"ms-vscode.js-debug-companion": "1.0.18",
"ms-vscode.vscode-js-profile-table": "1.0.3",
"alefragnani.numbered-bookmarks": "8.3.1",
"cschlosser.doxdocgen": "1.4.0",
"jeff-hykin.better-cpp-syntax": "1.15.19",
"jgclark.vscode-todo-highlight": "2.0.4",
"mhutchie.git-graph": "1.30.0",
"ms-vscode.cmake-tools": "1.11.26",
"ms-vscode.cpptools-extension-pack": "1.2.0",
"ms-vscode.cpptools-themes": "1.0.0",
"trond-snekvik.gnu-mapfiles": "1.1.0",
"twxs.cmake": "0.0.17"
}
},
"tools": {
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\arm-none-eabi-gcc.exe": "9-2019-q4-major",
"C:\\work\\tools\\SEGGER\\JLink\\JLink.exe": "7.58b",
"c:\\work\\tools\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\nrfjprog.exe": "10.15.0",
"nrfutil": "Not found",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\cmake.exe": "3.20.5",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\Scripts\\west.exe": "0.11.1",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\python.exe": "3.8.2",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\ninja.exe": "1.9.0",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\gperf.exe": "3.1",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\dtc.exe": "1.4.7",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\gn.exe": "1937",
"c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\mingw64\\bin\\git.exe": "2.26.2.windows.1"
},
"sdks": [
{
"version": "1.7.0",
"path": "c:\\work\\tools\\ncs\\v1.7.0"
}
],
"toolchains": [
{
"version": "1.7.0",
"path": {
"$mid": 1,
"fsPath": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain",
"_sep": 1,
"path": "/C:/work/tools/ncs/v1.7.0/toolchain",
"scheme": "file"
}
}
],
"connectedDevices": [
{
"serialNumber": "682895873"
}
],
"deviceProviders": [
"nrfjprog"
],
"config": {
"nordic-semiconductor.nrf-connect": {
"topdir": "${nrf-connect.sdk:1.7.0}",
"toolchain": {
"path": "${nrf-connect.toolchain:1.7.0}"
},
"ozonePath": "",
"applications": [
"${workspaceFolder}"
],
"applicationOptions": {},
"kconfig": {
"interface": "kconfig"
},
"welcome": {
"showOnStartup": false
},
"west": {
"env": {
"$base": "terminal"
}
},
"boardRoots": [],
"enableTelemetry": false,
"taskBindings": {},
"debugging": {
"backend": "Cortex-Debug"
},
"activeAppFollowActiveEditor": true
},
"nordic-semiconductor.nrf-terminal": {
"terminalMode": "character"
},
"marus25.cortex-debug": {
"armToolchainPath": null,
"armToolchainPrefix": "arm-none-eabi",
"gdbPath": null,
"objdumpPath": null,
"JLinkGDBServerPath": null,
"openocdPath": null,
"pyocdPath": null,
"PEGDBServerPath": null,
"stutilPath": null,
"stlinkPath": null,
"stm32cubeprogrammer": null,
"enableTelemetry": true,
"registerUseNaturalFormat": true,
"variableUseNaturalFormat": true,
"dbgServerLogfile": null,
"showRTOS": false,
"showDevDebugOutput": "none"
}
},
"environment": {
"westExe": "west",
"westEnv": {
"ELECTRON_RUN_AS_NODE": "1",
"HOME": "C:\\Users\\_____",
"HOMEDRIVE": "C:",
"HOMEPATH": "\\Users\\_____",
"Path": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\mingw64\\bin;c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\mingw64\\libexec\\git-core;c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin;c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\Scripts;_____;c:\\work\\tools\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin;C:\\work\\tools\\SEGGER\\JLink;C:\\Program Files (x86)\\ZBar\\bin;C:\\Users\\_____\\AppData\\Local\\Microsoft\\WindowsApps;;C:\\work\\tools\\Microsoft VS Code\\bin",
"ZEPHYR_BASE": "c:\\work\\tools\\ncs\\v1.7.0\\zephyr",
"GNUARMEMB_TOOLCHAIN_PATH": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt",
"ZEPHYR_TOOLCHAIN_VARIANT": "gnuarmemb",
"PYTHONPATH": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin;c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\Lib;c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin\\Lib\\site-packages",
"Python3_ROOT": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin"
},
"inherited": {
"ELECTRON_RUN_AS_NODE": "1",
"HOME": "C:\\Users\\_____",
"HOMEDRIVE": "C:",
"HOMEPATH": "\\Users\\_____",
"Path": "C:\\Program Files (x86)\\Common Files\\Oracle\\Java\\javapath;C:\\windows\\system32;C:\\windows;C:\\windows\\System32\\Wbem;C:\\windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\windows\\System32\\OpenSSH\\;C:\\Program Files\\PuTTY\\;C:\\Program Files\\Git\\cmd;C_____;c:\\work\\tools\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin;C:\\work\\tools\\SEGGER\\JLink;_____;C:\\work\\tools\\Microsoft VS Code\\bin",
"PATH": "_____c:\\work\\tools\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin;C:\\work\\tools\\SEGGER\\JLink;C:\\Program Files (x86)\\ZBar\\bin;C:\\Users\\_____\\AppData\\Local\\Microsoft\\WindowsApps;;C:\\work\\tools\\Microsoft VS Code\\bin"
},
"toolchainPath": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain",
"toolchainBinPath": "c:\\work\\tools\\ncs\\v1.7.0\\toolchain\\opt\\bin",
"toolchainVersion": "1.7.0"
},
"terminal": {
"shell": null,
"defaultProfile": null
}
}

I guess the problem might be induced by an extension which was recently updated...