Connecting CR2032 to nRF6310/PCA10005

[Shane]

Hello,

I want to test my circuit using a CR2032 coin cell. Is there any way to jumper a coin cell into the supply on the nRF6310 and bypass the voltage regulator/RS232/etc? I just need to power the VCC bus on the PCA10005.

It appears that the AAA socket powers more than just the module; otherwise I could just attach my leads to the exposed AAA contacts.

I understand that there will probably not be enough current for programming the nRF51822, but assume that I have programmed the chip first via USB.

Thank you,

Shane

[Hung Bui]

@Shane: If you don't use GPIO pins, you can simply hook the battery + to pin 2 of K1 (VCC_nRF); and use PCA10005 as a stand alone module.

[Shane]

Si I have decided to just remap all of my IO to the AIO header (P5) that is on the PCA10005 module. I needed to figure this out anyway.

A new problem that I am having is that current monitoring no longer works. I have the CR2032 connected to pin K1:2 and pins K1:2,3 shorted. Module powers, but signal @ K2:1 (TP1) looks like ground.

Is there something going on with VTG/nRF_VCC nets if teh module is unplugged? Looking at schematic for PCA10004/5 (V2.0.0) and I don't see where nRF_VCC and VTG are linked on the module.

• Shane