There is no output to UART console when I set CONFIG_BT=y in prj.conf
peripheral_lbs sample project in ncs V2.0.2 can't printk anything.
There is no output to UART console when I set CONFIG_BT=y in prj.conf
peripheral_lbs sample project in ncs V2.0.2 can't printk anything.
Hi,
Unfortunately I cannot reproduce your issue.
I just now tried a brand new application based on the NCS v2.0.2 peripheral_lbs example on both the nRF52DK and the nRF5340DK, and for both printk() worked and I got data on a Serial Port.
I really don't think CONFIG_BT=y would break UART console, that would really not make sense.
Are you developing on a Development Kit or on your custom board?
By the way, as you requested, the prj.conf used to test:
# # Copyright (c) 2018 Nordic Semiconductor # # SPDX-License-Identifier: LicenseRef-Nordic-5-Clause # CONFIG_NCS_SAMPLES_DEFAULTS=y CONFIG_BT=y CONFIG_BT_PERIPHERAL=y CONFIG_BT_DEVICE_NAME="Nordic_LBS" # Enable the LBS service CONFIG_BT_LBS=y CONFIG_BT_LBS_POLL_BUTTON=y CONFIG_DK_LIBRARY=y CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
Best regards,
Hieu
P.s: Are you by any chance building with the example's prj_minimal.conf?
P.s: Are you by any chance building with the example's prj_minimal.conf?