DFU of softdevice or softdevice+bootloader makes iOS app crash

[peterh]

sdonly.zipsoftdevice.zipCustom board with a nRF51422, SD 310 rev 2.0.0, nRF Toolbox rev 2.4, iOS 8.4

When trying to use the DFU app to update my softdevice and/or the combined package with softdevice+bootloader the application crashes/quits without errormessage, warnings or anything.

I can update the application or the bootloader successfully, but as soon as the SD is involved I get nowhere in a hurry.

Any good ideas as to what goes wrong?

The zip file is generated from s310_nrf51422_2.0.0_softdevice.hex and my own bootloader.hex, by peeling of lines as described in the howto, running hex2bin, combining them with copy /b and thus obtaining the crc using crc.exe. Finally my shot at a .dat is zipped together with the original .hex files.

[Hung Bui]

Could you explain why you set sq_req of 79 (0x4F) and 90 (0x5A) ? The S310 v2.0.1 has ID of 93 (0x5D).

When you are not so sure about the softdevice version, you should use 0xfffe. This allows all softdevice version.

I attached here the .zip file I used and tested with the bootloader from SDK v7.2

softdeviceS310v201.zip

[peterh]

According to the migration guide, it is possible to change from s310 v2.0 to S310 v3.0 OTA by using first updating the bootloader together with s210 v5.0, then updating the bootloader with s310 v3.0, and finally updating the s310 v3.0 compatible application - no debugger necessary! As far as I can see from it is not possible to update the bootloader separately.