LED implementation on nrF9160 with nRF connect 2.1.2

[Rafalino]

Hi all ,

I had my code working on nRF connect 1.6.0 and now had to upgrade it to work with nRF connect 2.1.2.

I read the migration guide for  nRF connect 1.x.x to 2.x.x  but still can't fully understand how to port my working code on nRF connect 1.6.0 that controlled the LEDs to nRF connect 2.1.2

Here is the nRF connect 1.6.0:

void init_leds(void)
{
        /* GPIOs:  p0.02 == RED */
        red_gpio = DT_GPIO_PIN(DT_ALIAS(LED_RED_LABEL), gpios);

        /* GPIOs:  p0.03 == BLUE */
        blue_gpio=  DT_GPIO_PIN(DT_ALIAS(LED_BLUE_LABEL), gpios);

   dev_red = device_get_binding(DT_GPIO_LABEL(DT_ALIAS(LED_RED_LABEL), gpios));
        NULL_ERROR_CHECK_RETURN_VOID(dev_red);
        dev_blue = device_get_binding(DT_GPIO_LABEL(DT_ALIAS(LED_BLUE_LABEL), gpios));
   NULL_ERROR_CHECK_RETURN_VOID(dev_blue);
       
        gpio_pin_configure(dev_red, red_gpio, GPIO_OUTPUT_ACTIVE | DT_GPIO_FLAGS(DT_ALIAS(LED_RED_LABEL), gpios));
        gpio_pin_configure(dev_blue, blue_gpio, GPIO_OUTPUT_ACTIVE | DT_GPIO_FLAGS(DT_ALIAS(LED_BLUE_LABEL), gpios));
}

void led_control(int led, int cmd)
{  
    switch (led)
    {
        case LED_RED:
              gpio_pin_set(dev_red, red_gpio, cmd);
              break;
        case LED_BLUE:
              gpio_pin_set(dev_blue, blue_gpio, cmd);
              break;
        default:
              LOG_WRN("GPIO %d is not connected to any LED",led);
            break;
    }  
}

Can someone guide me what to do ?

Thanks in advance ,

Rafalino

[Einarh]

Hello

It would help if you shared exactly what you're having trouble with.

In general I would recommend looking up the APIs you're using in the newest documentation to check if they still work the same way:

https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/index.html

If you've done this and you are having trouble with something specific then please share any error messages you are seeing.

Best regards,

Einar

[Rafalino]

Hello Einar,

The main issue that I have is how do I get the device that corresponds to led0, led1.

I am able to get the GPIOs using : 

      /* GPIOs:  p0.02 == RED */
      red_gpio = DT_GPIO_PIN(DT_NODELABEL(led0), gpios);
 
      /* GPIOs:  p0.03 == BLUE */
      blue_gpio=  DT_GPIO_PIN(DT_NODELABEL(led1), gpios);

How do I get the relevant device id?