iOS NRF Mesh Issue

[ArpitA]

Hi,

iOS NRF Mesh 2.2.3 version is working, but  3.2.0  unable to connect nodes,

Please suggest the procedure with iOS version in details.

Regards,

ArpitA

[Hieu]

Hi ArpitA,

I just tried iOS nRF Mesh 3.2.0 and I can provision nodes to a Mesh network just fine.

What are you trying to do? What difficulty are you having, in a bit more details please?

Regards,

Hieu

[ArpitA]

Hello Hieu,

Firstly, I tried to create mesh without grouping, that was not working.

Later mesh done after creating group and its working.

Please clarify why group is required in this version 3.2.0.

Another thing , out of 10, 4 /5 times missing mesh response.

Here we are using two embedded devices(with microcontroller) which is having Bluetooth support. These devices have relays controlled via switches.

we are binding these devices into Mesh, and during the Mesh operation when we operate switches in both the devices relays turn on/off based on the events.

We have Nodric stack running on the devices,we are using Nordic Mesh app for listing the devices and we are binding them with similar application keys and configuring Generic On Off Server and Generic On Off Client under Elements section in NRF app.

Please suggest.

Thanks!

Best Regards,

ArpitA

[Hieu]

Hi ArpitA,

Please be informed I have received your information. However, I am out of office today and tomorrow. I will return to work next week and follow-up with you latest by the end of Wed 30 Nov. If you need support earlier than that, please let me know and we can arrange some alternative.

Best regards,

Hieu

[ArpitA]

Hello Hieu,

Thanks for your reply.

If you got my pointed issue, please suggest . If problem can be solved earliest, that's also completely ok.

Best Regards,

ArpitA

[Hieu]

Hi ArpitA,

I tried iOS nRF Mesh 3.2.0. Without using the Group feature at all, I was able to provision two Mesh Light devices and one Mesh Light Switch device, and I can see all of them work as intended.

Could you please give even more details on your steps. Maybe even screenshots with captions on what you did and what you saw?

Best regards,

Hieu

[ArpitA]

Hello Hieu,

Thanks again!

I have two queries.

1. Group related.

2. When two devices connected via mesh, then at the time of commutation between devices , many time mesh events not working( data is not transmitting from one device to another).

NB:

Following steps I followed without group , 

Network -> Add -> Provision Device List -> Clk on Device from list -> CLK  Provision -> select No OOB ->  Success (OK)  -> Add application Key 

Select element (4 models) :

Generic OnOff Server  ->  Bind Application Key

Generic OnOff Client  -> Bind Application Key ->  unable to set publication if group is not created.

And this way Mesh is not working.

If I create group and from set publication can select all nodes, and mesh created.

 

Please Suggest.

Best Regards,

ArpitA