Custom board configuration causes runtime error, "E: Device id 00 00 00 does not match config ef 40 14"

[zsvtmml]

Our project was previously functional when we were developing using the nrf52840dk_nrf52840 with an overlay to reconfigure for our custom pcba. We created a custom board config using the "Create a new board" thing in  nRF Connect. After adding a bunch of apparently missing CONFIGs in <custom_pcba_name>_defconfig, and copying all the dts stuff over form zephyr/boads/arm/nrf52840dk_nrf52840 the project builds, but fails in runtime with following output to the console:

Our project was previously functional when we were developing using the nrf52840dk_nrf52840 with an overlay to reconfigure for our custom pcba. We created a custom board config using the "Create a new board" thing in  nRF Connect. After adding a bunch of apparently missing CONFIGs in <custom_pcba_name>_defconfig, and copying all the dts stuff over form zephyr/boads/arm/nrf52840dk_nrf52840 the project builds, but fails in runtime on a call to bt_enable, with following output to the console:

Our project was previously functional when we were developing using the nrf52840dk_nrf52840 with an overlay to reconfigure for our custom pcba. We created a custom board config using the "Create a new board" thing in  nRF Connect. After adding a bunch of apparently missing CONFIGs in <custom_pcba_name>_defconfig, and copying all the dts stuff over form zephyr/boads/arm/nrf52840dk_nrf52840 the project builds, but fails in runtime on a call to bt_enable, with following output to the console:

E: Device id 00 00 00 does not match config ef 40 14

Any help on how to fix this would me much appreciated.

Thank you.

[Susheel Nuguru]

Hi, I see that you have another thread created that says that you have issues initializing BLE. 

Are these two unrelated or you have solved this to move ahead to that issue?

[zsvtmml]

Susheel,

Can you please take a look at this case?

Thank you.

[Susheel Nuguru]

Hi Matthew, Sorry for the delay, I was in a training yesterday and could not look into this case.

Can you please attach your project with the custom board files so that I can give it a try to debug why you see that message. It must be a configuration issue which we will try to find and correct. 

[zsvtmml]

Susheel,

I think it better that we continue this in a private case so that I can attach a project. I will close this one and open a private case.

Thank you.