Using Segger version 5.10. As we found that only this version can work with the SDK17 we use for BLE application. We tried the latest version and latest sdk but we could not make it work directly.
My question is i want to modify the peripheral example for ble as follows
1. The sensor is connected to the Analog input via signal conditioning.
2. We keep reading the value of the sensor.
3. We maintain a counter of min. so we the timer be on even in sleep or deeep sleep mode so we get correct min count from the start of the device
4. We want to store the ADC value along with the counter in the flash memory. Thus using the program memory to store the data Please guide how we can use it
5. We want to use BLE connection to mobile. We need to use BLE only when the phone is in the vicinity else the BLE should be kept off. So is there a way the
a. In run mode we know that the required phone with the required BLE name is available and we can connect to it
b. During the sleep or deep sleep mode when we are not takinng the sensor reading, is there a way to wake up when we detect the phone (BLE) is in vicinity
Please guide. Thank you
Regards
Jivan
