Beware that this post is related to an SDK in maintenance mode
More Info: Consider nRF Connect SDK for new designs

Upgrading to NCS 2.0.2 for nRF5340

Hello,

I have been successfully developing, programming, and debugging with NCS v1.9.1 on a custom nRF5340 design. As my target board, I base it off the ubx_evknorab10_nrf5340 from the u-blox-sho-OpenCPU repository. I saw that NCS v2.0.2 was now supported on that board, so I went ahead and installed v2.0.2 using the Toolchain Manager. After a successful install, I opened VS Code and tried to compile with this new toolchain. It failed with the following errors. Can you advise on how to fix this?

Thank you,

Jamie

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

FAILED: zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj
C:\ncs\toolchains\v2.0.2\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DKERNEL -DNRF5340_XXAA_APPLICATION -DNRF_SKIP_FICR_NS_COPY_TO_RAM -DUSE_PARTITION_MANAGER=0 -D_FORTIFY_SOURCE=2 -D__PROGRAM_START -D__ZEPHYR_SUPERVISOR__ -D__ZEPHYR__=1 -IC:/ncs/v2.0.2/zephyr/include/zephyr -IC:/ncs/v2.0.2/zephyr/include -Izephyr/include/generated -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/common/. -IC:/ncs/v2.0.2/nrf/include -IC:/ncs/v2.0.2/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.0.2/zephyr/modules/hal_nordic/nrfx/. -isystem C:/ncs/v2.0.2/zephyr/lib/libc/minimal/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include-fixed -isystem C:/ncs/v2.0.2/nrfxlib/crypto/nrf_cc312_platform/include -Og -imacros C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController/build/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/ncs/v2.0.2/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.0.2/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.0.2=WEST_TOPDIR -ffunction-sections -fdata-sections -std=c99 -nostdinc -MD -MT zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj -MF zephyr\drivers\spi\CMakeFiles\drivers__spi.dir\spi_nrfx_spim.c.obj.d -o zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj -c C:/ncs/v2.0.2/zephyr/drivers/spi/spi_nrfx_spim.c
In file included from C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain.h:50,
from C:\ncs\v2.0.2\zephyr\include\zephyr\init.h:10,
from C:\ncs\v2.0.2\zephyr\include\zephyr\device.h:29,
from C:\ncs\v2.0.2\zephyr\include\zephyr\drivers\spi.h:24,
from C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:7:
C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@8000 defined without required pin configuration"
77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
| ^~~~~~~~~~~~~~
c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:218:2: note: in expansion of macro 'BUILD_ASSERT'
218 | BUILD_ASSERT((IS_ENABLED(CONFIG_PINCTRL) && \
| ^~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:584:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
584 | SPI_NRFX_SPIM_DEVICE(0);
| ^~~~~~~~~~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@8000 has legacy *-pin properties defined although PINCTRL is enabled"
77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
| ^~~~~~~~~~~~~~
c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:229:2: note: in expansion of macro 'BUILD_ASSERT'
229 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PINCTRL) || \
| ^~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:584:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
584 | SPI_NRFX_SPIM_DEVICE(0);
| ^~~~~~~~~~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@a000 has legacy *-pin properties defined although PINCTRL is enabled"
77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
| ^~~~~~~~~~~~~~
c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:229:2: note: in expansion of macro 'BUILD_ASSERT'
229 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PINCTRL) || \
| ^~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:600:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
600 | SPI_NRFX_SPIM_DEVICE(4);
| ^~~~~~~~~~~~~~~~~~~~
[73/171] Building C object zephyr/drivers/timer/CMakeFiles/drivers__timer.dir/nrf_rtc_timer.c.obj
[74/171] Linking C static library zephyr\lib\posix\liblib__posix.a
[75/171] Building C object modules/nrf/drivers/hw_cc310/CMakeFiles/..__nrf__drivers__hw_cc310.dir/hw_cc310.c.obj
[76/171] Linking C static library zephyr\drivers\clock_control\libdrivers__clock_control.a
[77/171] Linking C static library zephyr\drivers\gpio\libdrivers__gpio.a
[78/171] Building C object CMakeFiles/app.dir/src/main.c.obj
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'c:\ncs\toolchains\v2.0.2\opt\bin\cmake.EXE' --build 'c:\D-drive\Tessarae\Aurelia\Firmware\HexTile\HexTileController\build'

* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.

Parents
  • Hello Jamie,

    The build errors are likely due to the introduction of Pin control(pinctrl) in Zephyr. The steps for migrating a project are shown in the documentation.

    It looks like the project you refer to has been updated to nRF Connect SDK v2.0.2. Check out the project's board files, for example these two files:

  • Hello. I tried adding pinctrl to the overlay but still getting errors. First, here is what I added to the overlay:

    ------------------------------------------------------------------------------------------------------------------------------------------

      &pinctrl {
        i2c1_default: i2c1_default {
            group1 {
                psels = <NRF_PSEL(TWIM_SDA, 1, 2)>,
                    <NRF_PSEL(TWIM_SCL, 1, 3)>;
            };
        };
        i2c1_sleep: i2c1_sleep {
            group1 {
                psels = <NRF_PSEL(TWIM_SDA, 1, 2)>,
                    <NRF_PSEL(TWIM_SCL, 1, 3)>;
                low-power-enable;
            };
        };
        i2c2_default: i2c2_default {
            group1 {
                psels = <NRF_PSEL(TWIM_SDA, 0, 18)>,
                    <NRF_PSEL(TWIM_SCL, 0, 17)>;
            };
        };
        i2c2_sleep: i2c2_sleep {
            group1 {
                psels = <NRF_PSEL(TWIM_SDA, 0, 18)>,
                    <NRF_PSEL(TWIM_SCL, 0, 17)>;
            };
            low-power-enable;
        };
        spi0_default: spi0_default {
            group1 {
                psels = <NRF_PSEL(SPIM_SCK, 0, 19)>,
                    <NRF_PSEL(SPIM_MISO, 0, 21)>,
                    <NRF_PSEL(SPIM_MOSI, 0, 20)>;
            };
        };
        spi0_sleep: spi0_sleep {
            group1 {
                psels = <NRF_PSEL(SPIM_SCK, 0, 19)>,
                    <NRF_PSEL(SPIM_MISO, 0, 21)>,
                    <NRF_PSEL(SPIM_MOSI, 0, 20)>;
                low-power-enable;
            };
        };
        spi4_default: spi4_default {
            group1 {
                psels = <NRF_PSEL(SPIM_SCK, 0, 8)>,
                    <NRF_PSEL(SPIM_MISO, 0, 10)>,
                    <NRF_PSEL(SPIM_MOSI, 0, 9)>;
            };
        };
        spi4_sleep: spi4_sleep {
            group1 {
                psels = <NRF_PSEL(SPIM_SCK, 0, 8)>,
                    <NRF_PSEL(SPIM_MISO, 0, 10)>,
                    <NRF_PSEL(SPIM_MOSI, 0, 9)>;
                low-power-enable;
            };
        };
      };
    -----------------------------------------------------------------------------------------------------------------------------------------

    Next, here is the new set of errors I am getting when compiling.

    -----------------------------------------------------------------------------------------------------------------------------------------

    FAILED: zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj
    C:\ncs\toolchains\v2.0.2\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DKERNEL -DNRF5340_XXAA_APPLICATION -DNRF_SKIP_FICR_NS_COPY_TO_RAM -DUSE_PARTITION_MANAGER=0 -D_FORTIFY_SOURCE=2 -D__PROGRAM_START -D__ZEPHYR_SUPERVISOR__ -D__ZEPHYR__=1 -IC:/ncs/v2.0.2/zephyr/include/zephyr -IC:/ncs/v2.0.2/zephyr/include -Izephyr/include/generated -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/common/. -IC:/ncs/v2.0.2/nrf/include -IC:/ncs/v2.0.2/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.0.2/zephyr/modules/hal_nordic/nrfx/. -isystem C:/ncs/v2.0.2/zephyr/lib/libc/minimal/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include-fixed -isystem C:/ncs/v2.0.2/nrfxlib/crypto/nrf_cc312_platform/include -Og -imacros C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController/build/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/ncs/v2.0.2/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.0.2/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.0.2=WEST_TOPDIR -ffunction-sections -fdata-sections -std=c99 -nostdinc -MD -MT zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj -MF zephyr\drivers\i2c\CMakeFiles\drivers__i2c.dir\i2c_nrfx_twim.c.obj.d -o zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj -c C:/ncs/v2.0.2/zephyr/drivers/i2c/i2c_nrfx_twim.c
    In file included from C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain.h:50,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\init.h:10,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\device.h:29,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\drivers\i2c.h:23,
    from C:\ncs\v2.0.2\zephyr\drivers\i2c\i2c_nrfx_twim.c:8:
    C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/i2c@b000 defined without required pin configuration"
    77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
    | ^~~~~~~~~~~~~~
    c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:218:2: note: in expansion of macro 'BUILD_ASSERT'
    218 | BUILD_ASSERT((IS_ENABLED(CONFIG_PINCTRL) && \
    | ^~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\i2c\i2c_nrfx_twim.c:409:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
    409 | NRF_DT_CHECK_PIN_ASSIGNMENTS(I2C(idx), 1, scl_pin, sda_pin); \
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\i2c\i2c_nrfx_twim.c:469:1: note: in expansion of macro 'I2C_NRFX_TWIM_DEVICE'
    469 | I2C_NRFX_TWIM_DEVICE(2);
    | ^~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/i2c@b000 has legacy *-pin properties defined although PINCTRL is enabled"
    77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
    | ^~~~~~~~~~~~~~
    c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:229:2: note: in expansion of macro 'BUILD_ASSERT'
    229 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PINCTRL) || \
    | ^~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\i2c\i2c_nrfx_twim.c:409:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
    409 | NRF_DT_CHECK_PIN_ASSIGNMENTS(I2C(idx), 1, scl_pin, sda_pin); \
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\i2c\i2c_nrfx_twim.c:469:1: note: in expansion of macro 'I2C_NRFX_TWIM_DEVICE'
    469 | I2C_NRFX_TWIM_DEVICE(2);
    | ^~~~~~~~~~~~~~~~~~~~
    [65/171] Building C object zephyr/drivers/timer/CMakeFiles/drivers__timer.dir/sys_clock_init.c.obj
    [66/171] Building C object zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj
    FAILED: zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj
    C:\ncs\toolchains\v2.0.2\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DKERNEL -DNRF5340_XXAA_APPLICATION -DNRF_SKIP_FICR_NS_COPY_TO_RAM -DUSE_PARTITION_MANAGER=0 -D_FORTIFY_SOURCE=2 -D__PROGRAM_START -D__ZEPHYR_SUPERVISOR__ -D__ZEPHYR__=1 -IC:/ncs/v2.0.2/zephyr/include/zephyr -IC:/ncs/v2.0.2/zephyr/include -Izephyr/include/generated -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/ncs/v2.0.2/zephyr/soc/arm/nordic_nrf/common/. -IC:/ncs/v2.0.2/nrf/include -IC:/ncs/v2.0.2/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.0.2/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.0.2/zephyr/modules/hal_nordic/nrfx/. -isystem C:/ncs/v2.0.2/zephyr/lib/libc/minimal/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include -isystem c:/ncs/toolchains/v2.0.2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/10.3.0/include-fixed -isystem C:/ncs/v2.0.2/nrfxlib/crypto/nrf_cc312_platform/include -Og -imacros C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController/build/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/ncs/v2.0.2/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/D-drive/Tessarae/Aurelia/Firmware/HexTile/HexTileController=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.0.2/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.0.2=WEST_TOPDIR -ffunction-sections -fdata-sections -std=c99 -nostdinc -MD -MT zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj -MF zephyr\drivers\spi\CMakeFiles\drivers__spi.dir\spi_nrfx_spim.c.obj.d -o zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj -c C:/ncs/v2.0.2/zephyr/drivers/spi/spi_nrfx_spim.c
    In file included from C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain.h:50,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\init.h:10,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\device.h:29,
    from C:\ncs\v2.0.2\zephyr\include\zephyr\drivers\spi.h:24,
    from C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:7:
    C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@8000 defined without required pin configuration"
    77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
    | ^~~~~~~~~~~~~~
    c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:218:2: note: in expansion of macro 'BUILD_ASSERT'
    218 | BUILD_ASSERT((IS_ENABLED(CONFIG_PINCTRL) && \
    | ^~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
    518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:584:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
    584 | SPI_NRFX_SPIM_DEVICE(0);
    | ^~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@8000 has legacy *-pin properties defined although PINCTRL is enabled"
    77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
    | ^~~~~~~~~~~~~~
    c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:229:2: note: in expansion of macro 'BUILD_ASSERT'
    229 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PINCTRL) || \
    | ^~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
    518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:584:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
    584 | SPI_NRFX_SPIM_DEVICE(0);
    | ^~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\include\zephyr\toolchain\gcc.h:77:36: error: static assertion failed: "/soc/peripheral@50000000/spi@a000 has legacy *-pin properties defined although PINCTRL is enabled"
    77 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
    | ^~~~~~~~~~~~~~
    c:\ncs\v2.0.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:229:2: note: in expansion of macro 'BUILD_ASSERT'
    229 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PINCTRL) || \
    | ^~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:518:2: note: in expansion of macro 'NRF_DT_CHECK_PIN_ASSIGNMENTS'
    518 | NRF_DT_CHECK_PIN_ASSIGNMENTS(SPIM(idx), 1, \
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
    C:\ncs\v2.0.2\zephyr\drivers\spi\spi_nrfx_spim.c:600:1: note: in expansion of macro 'SPI_NRFX_SPIM_DEVICE'
    600 | SPI_NRFX_SPIM_DEVICE(4);
    | ^~~~~~~~~~~~~~~~~~~~

  • Hi.Thank you for the help. I have attached the test code source, plus the overlay and prj.conf, etc. Please let me know what I'm doing wrong. Thanks.

    -JamieuBlox_Test.zip

  • Hello. I was just checking in to see if you had a chance to review my attached project and if you had any advice on how to fix the problem. Thank you.

    -Jamie

  • Hello Jamie, sorry for the delay.

    Which board have you selected in your build configuration?

    Where do you keep the board files for ubx_evknorab10_nrf5340? You may add them to 'uBlox_Test/boards/ubx_evknorab10_nrf5340' and this as a custom board.

    Please see attached sample demonstrating the use of this custom board. You will need to add the board by clicking "Create board" in the Welcome screen in VS Code. Then select the board when creating a build configuration.

    0602.hello_world.zip

  • Hello. I have found the issue. When I switched to the pinctrl version, I forgot to remove some references to the old definitions. Specifically, I was using the macros:

    DT_PROP(SENSOR_BUS, scl_pin),
    DT_PROP(SENSOR_BUS, sda_pin),

    Once I got rid of these, the program is now compiling under 2.0.2. Thank you!

    -Jamie

  • Great to hear that it is now building. Thank you for posting the solution!

Reply Children
No Data
Related