can't install firmware on the thingy:53

The thingy:53 original installed Firmware worked fine with the accelerometer etc.. and the mobile app. 

I installed Peripheral LBS with the NRF Programmer successfully and it also worked fine.

But if I try to install any other application/firmware it uploads ~ 48% and then it displays an Error.

The LED never stops Blinking ... the Peripheral LBS continues to run..

How can I reset to the edge impulse firmware or enable it to load any of the other firmware apps.

Please help.

Thanks

Chris 

  • Hello,

    Are you getting any error message from the programmer App? You can actually install the default Edge Impulse firmware using the Programmer App itself. If you check the nRF programmer App you can see the Edge Impulse Sample just like the other samples mentioned here.

    You can also update the Edge impulse firmware via USB or by using an external debug probe. Please download the precompiled Application firmware file and inside you can find the Edge impulse Application inside.

    Kind Regards,

    Abhijith

  • 2023-02-06T10:35:45.781 [A] Upgrade started with 2 images using 'Confirm Only' mode

     

    2023-02-06T10:35:46.963 [A] Device capabilities received

     

    I tried to installing with the programmer app and this is what I get...

    Here's the error log.

    2023-02-06T10:35:46.964 [D] Setting SAR buffer size to 2475 bytes

     

    2023-02-06T10:35:47.024 [I] Validation response: {"images" : {{"bootable" : true, "confirmed" : true, "hash" : 0x616DD8B14A22C3CAEA6C12128ED9113D79C9F47AF116906F3D4F00E42023C34A, "active" : true, "image" : 0, "slot" : 0, "pending" : false, "version" : "2.0.0", "permanent" : false}, {"permanent" : false, "hash" : 0x03249A228A726D6E32E8A36EF970F2A67B9F84E61D7F085CEBC2BD2CEBDB29AF, "image" : 1, "pending" : false, "confirmed" : false, "active" : false, "bootable" : true, "version" : "1.0.0", "slot" : 1}}, "splitStatus" : 0}

     

    2023-02-06T10:35:47.024 [A] Image 1 already uploaded

     

    2023-02-06T10:36:21.044 [E] Request (Group: image, seq: 39) failed: Sending the request timed out.)

     

    2023-02-06T10:36:21.044 [E] Sending the request timed out.

     

    2023-02-06T10:36:21.045 [E] Upload cancelled due to error: sendTimeout

     

    2023-02-06T10:36:21.081 [E] Request (Group: image, seq: 40) failed: Sending the request timed out.)

     

    2023-02-06T10:36:21.081 [W] Image upload is not in progress

     

    2023-02-06T10:36:21.220 [E] Request (Group: image, seq: 41) failed: Sending the request timed out.)

     

    2023-02-06T10:36:21.220 [W] Image upload is not in progress

     

    Get Outlook for iOS

  • Hello,

    I am not sure why it is happening (confusing from the log) like this via nRF programmer Mobile App. Could you once try changing the firmware(current running Application) inside the thingy53 via our nRF connect for desktop-->Programmer? For  doing this you need to make the thingy53 into bootloader mode. Please follow the steps mentioned here. Then write with Edge impulse zip file inside precompiled Application Firmware.

    Kind Regards,

    Abhijith

Related