How to disable APPROTECT permanently? DFU is needed

Question

Hi,

I have been using nrf52840 chip for a while and now the new revision of the chip has APPROTECT feature that locks the writing until nrfjprog --recover is run and the whole chip is erased. This is my chip revision

I am using S340 (ANT_s340_nrf52840_6.1.1.hex)

I followed the instruction to disable APPROTECT using this code and called it in main function

void approtect_hw_disable(void)
{
    if ((NRF_UICR->APPROTECT & UICR_APPROTECT_PALL_Msk) 
       == (UICR_APPROTECT_PALL_Msk))
    {
        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
        while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
        NRF_UICR->APPROTECT = (UICR_APPROTECT_PALL_HwDisabled << UICR_APPROTECT_PALL_Pos);
        while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
        while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
        NVIC_SystemReset();
    }  
}

The chip is unlock but if I do a reset or power cycle, the chip will be locked again.

I want to ask if there is a way to permanently disable APPROTECT feature,, which mean it will work as old revision chips.

Edit:

Problem solved! I must use the latest MDK (8.44.1) and recompile everything. I hope this will help others who looking for a solution!

Thank you so much!

Hung Bui · Accepted Answer

The code you provided in your question is actually disabling APPROTECT in the hardware. It's the code that written to UICR to disable APPROTECT.
Please see here: https://infocenter.nordicsemi.com/topic/ps_nrf52840/dif.html?cp=5_0_0_3_7_1#concept_udr_mns_1s
In addition to hardware (write to UICR in flash, this only need to be done once) you need to disable it in firmware (write to APPROTECT.DISABLE in the firmware, this need to be performed on every boot)

How to disable APPROTECT permanently? DFU is needed

Top Replies