Programming of thingy:53?

Hi,

Recently I have got the thingy:53 and I was quite exited and started to learn nRF connect SDK. Soon when I tried to program the kit I realized that it needs some external JTAG programmer.. Which I do not have...So I looked for options and one of them is that it can be programmed via nRF4053 DK.

The 4053DK is smart enough to detect that something is there on the 10-pin connector which can be programmed.! Am I right?

For the thingy:53 I also looked at schematic where I also made it conform that it has no usb to ttl converter or similar on it.?

One more possibility is via nRF ble applications but which is pretty limited I think to rebuilt application only. Am I right?

Parents
  • Hi,

    I have got one more related question for Thingy:53.

    I can upload the recompiled binary(.zip) to the board but do not know how I can upload the (.hex) files to the board via nRF programmer app. 

    I have some files in .hex and some in .img files which needs to be uploaded to the Thingy and I realized they are not being uploaded.

  • I was working on the firmware update part and found that I can actually update the firmware but MCUboot needs to be enabled in kconfig.

    The question for me is that weather is it possible to load a binary build by other platforms than nRF connect SDK using nRF connect Programmer?

    I know it would be difficult but there might be possibility. One thing is that currently there is manifest.json file in the zip archive which could be an issue.?

    There are some fields which one may not know..like the following code has load_address etc.

    {
        "format-version": 0,
        "time": 1646868676,
        "files": [
            {
                "type": "application",
                "board": "thingy53_nrf5340_cpuapp",
                "soc": "nRF5340_CPUAPP_QKAA",
                "load_address": 66048,
                "image_index": "0",
                "slot_index_primary": "1",
                "slot_index_secondary": "2",
                "version_MCUBOOT": "1.0.0+0",
                "size": 235052,
                "file": "app_update.bin",
                "modtime": 1646868675
            },
            {
                "type": "application",
                "board": "thingy53_nrf5340_cpunet",
                "soc": "nRF5340_CPUNET_QKAA",
                "image_index": "1",
                "slot_index_primary": "3",
                "slot_index_secondary": "4",
                "load_address": 16812032,
                "version": "1",
                "size": 171348,
                "file": "net_core_app_update.bin",
                "modtime": 1646868626
            }
        ],
        "name": "light",
        "firmware": {
            "zephyr": {
                "revision": "8d7aa9fc1c06eea0ad021934f68879246b8aef26"
            },
            "nrf": {
                "revision": "126fad0e2e5cbe5b965a45efc6a5e31f40d6020c"
            }
        }
    }

    Also, is it possible to update just application core of the nRF5340?

Reply
  • I was working on the firmware update part and found that I can actually update the firmware but MCUboot needs to be enabled in kconfig.

    The question for me is that weather is it possible to load a binary build by other platforms than nRF connect SDK using nRF connect Programmer?

    I know it would be difficult but there might be possibility. One thing is that currently there is manifest.json file in the zip archive which could be an issue.?

    There are some fields which one may not know..like the following code has load_address etc.

    {
        "format-version": 0,
        "time": 1646868676,
        "files": [
            {
                "type": "application",
                "board": "thingy53_nrf5340_cpuapp",
                "soc": "nRF5340_CPUAPP_QKAA",
                "load_address": 66048,
                "image_index": "0",
                "slot_index_primary": "1",
                "slot_index_secondary": "2",
                "version_MCUBOOT": "1.0.0+0",
                "size": 235052,
                "file": "app_update.bin",
                "modtime": 1646868675
            },
            {
                "type": "application",
                "board": "thingy53_nrf5340_cpunet",
                "soc": "nRF5340_CPUNET_QKAA",
                "image_index": "1",
                "slot_index_primary": "3",
                "slot_index_secondary": "4",
                "load_address": 16812032,
                "version": "1",
                "size": 171348,
                "file": "net_core_app_update.bin",
                "modtime": 1646868626
            }
        ],
        "name": "light",
        "firmware": {
            "zephyr": {
                "revision": "8d7aa9fc1c06eea0ad021934f68879246b8aef26"
            },
            "nrf": {
                "revision": "126fad0e2e5cbe5b965a45efc6a5e31f40d6020c"
            }
        }
    }

    Also, is it possible to update just application core of the nRF5340?

Children
Related