Programming of thingy:53?

Hi,

Recently I have got the thingy:53 and I was quite exited and started to learn nRF connect SDK. Soon when I tried to program the kit I realized that it needs some external JTAG programmer.. Which I do not have...So I looked for options and one of them is that it can be programmed via nRF4053 DK.

The 4053DK is smart enough to detect that something is there on the 10-pin connector which can be programmed.! Am I right?

For the thingy:53 I also looked at schematic where I also made it conform that it has no usb to ttl converter or similar on it.?

One more possibility is via nRF ble applications but which is pretty limited I think to rebuilt application only. Am I right?

Parents
  • Hi,

    I have got one more related question for Thingy:53.

    I can upload the recompiled binary(.zip) to the board but do not know how I can upload the (.hex) files to the board via nRF programmer app. 

    I have some files in .hex and some in .img files which needs to be uploaded to the Thingy and I realized they are not being uploaded.

  • Hello,

    While programming or flashing via USB you need to make the Thingy53 in the bootloader mode. And also, are you enabling the "Enable MCUboot" tab in the nRF programmer App?

    ujur007 said:
    I have some files in .hex and some in .img files which needs to be uploaded to the Thingy and I realized they are not being uploaded.

    Yes you can upload the .hex file via nRF programmer. For eg:if you check the precompiled Application firmware for the thingy53 you can find some hex file under homekit_weather_station sample. Try flashing this hex file and see the change.

    Kind Regards,

    Abhijith

  • Hi,

    Thanks for reply. Actually the nRF connect programmer works and I have tried to flash recompiled binaries and it works. but what I am trying is that uploading the .img file generated by apache mynewt build system. That seems not working as mentioned in the previous link.

    The code upload but I do not see led blinking. That make me thing weather the flash worked? 

Reply
  • Hi,

    Thanks for reply. Actually the nRF connect programmer works and I have tried to flash recompiled binaries and it works. but what I am trying is that uploading the .img file generated by apache mynewt build system. That seems not working as mentioned in the previous link.

    The code upload but I do not see led blinking. That make me thing weather the flash worked? 

Children
No Data
Related