button exmaple is not working in SDK version 9.0.0

[MARTIN FR]

Hello evryone,

i cloned button example form github to sdk version 9.0.0 and i modified the neccesary changes between app.gpiote.c//nrf_drv_gpiote.c files and set the GPIOTE ENABLED to 0 after that it is getting compiled with no errors but the baord shows nothing if the press any of the button can anyone suggest me what modifications has to be done or any changes?

ble_app_template.zip

Thank you

prabhu

[Susheel Nuguru]

Hi prabhudurai,

still havent gone through your code, but had a quick look. I saw this below code in your init_gpio() function

NRF_GPIO->PIN_CNF[6] = (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos);

This is wrong as you are setting every other bits to '0' and only setting the drive strength. With this the pin will be configured as input. To do this correctly, you need to do this below

NRF_GPIO->PIN_CNF[6] &= ~(GPIO_PIN_CNF_DRIVE_Msk); // reset drive setting
NRF_GPIO->PIN_CNF[6] |= (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos); // set to high drive

you need to do this for pin settings 7 also.

[MARTIN FR]

Thanks ARYAN for your kind reply i have modified the gpio configuration based on your suggestion both the gpio pin 6 and pin 7 are output pins which are connected to the buzzer terminal and i ahve connected individually buzzer to pin 6 and 7 inorder to test only pin6 making the buzzer beep but the pin 7 does not make the buzzer beep but it is showing voltage across th pin is 2.9V i dont understand why this issue arising