button exmaple is not working in SDK version 9.0.0

[MARTIN FR]

Hello evryone,

i cloned button example form github to sdk version 9.0.0 and i modified the neccesary changes between app.gpiote.c//nrf_drv_gpiote.c files and set the GPIOTE ENABLED to 0 after that it is getting compiled with no errors but the baord shows nothing if the press any of the button can anyone suggest me what modifications has to be done or any changes?

ble_app_template.zip

Thank you

prabhu

[Susheel Nuguru]

Hi prabhudurai,

still havent gone through your code, but had a quick look. I saw this below code in your init_gpio() function

NRF_GPIO->PIN_CNF[6] = (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos);

This is wrong as you are setting every other bits to '0' and only setting the drive strength. With this the pin will be configured as input. To do this correctly, you need to do this below

NRF_GPIO->PIN_CNF[6] &= ~(GPIO_PIN_CNF_DRIVE_Msk); // reset drive setting
NRF_GPIO->PIN_CNF[6] |= (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos); // set to high drive

you need to do this for pin settings 7 also.

[Susheel Nuguru]

sorry, I have no buzzer, i have connected them to LED_! and LED_2 and they are glowing bright. Buzzers are different with different current consumption and loudness. So I cannot comment on how they should perform. With LEDs i can confirm that the code logic is now OK for buzzer.

I have also verified that if i press BUTTON1 for 3 seconds then LED3 glows and if i press button2 for 3 seconds then LED3 turns off. So your timers are also working fine.