button exmaple is not working in SDK version 9.0.0

[MARTIN FR]

Hello evryone,

i cloned button example form github to sdk version 9.0.0 and i modified the neccesary changes between app.gpiote.c//nrf_drv_gpiote.c files and set the GPIOTE ENABLED to 0 after that it is getting compiled with no errors but the baord shows nothing if the press any of the button can anyone suggest me what modifications has to be done or any changes?

ble_app_template.zip

Thank you

prabhu

[Susheel Nuguru]

Hi prabhudurai,

still havent gone through your code, but had a quick look. I saw this below code in your init_gpio() function

NRF_GPIO->PIN_CNF[6] = (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos);

This is wrong as you are setting every other bits to '0' and only setting the drive strength. With this the pin will be configured as input. To do this correctly, you need to do this below

NRF_GPIO->PIN_CNF[6] &= ~(GPIO_PIN_CNF_DRIVE_Msk); // reset drive setting
NRF_GPIO->PIN_CNF[6] |= (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos); // set to high drive

you need to do this for pin settings 7 also.

[MARTIN FR]

yes thank you can you send me the code that you have tested because button part is working separtely and pwm part is working sepately when i press the button 3 sec only LED 1 is blinking and when i press the button for 5sec led 1 is turned off but it is not interfacing with the pwm am trying to make the buzzer beep after the button is pressed for three seconds did my program is correct for performing this function please let me know about this point

Thank you