button exmaple is not working in SDK version 9.0.0

[MARTIN FR]

Hello evryone,

i cloned button example form github to sdk version 9.0.0 and i modified the neccesary changes between app.gpiote.c//nrf_drv_gpiote.c files and set the GPIOTE ENABLED to 0 after that it is getting compiled with no errors but the baord shows nothing if the press any of the button can anyone suggest me what modifications has to be done or any changes?

ble_app_template.zip

Thank you

prabhu

[Susheel Nuguru]

Hi prabhudurai,

still havent gone through your code, but had a quick look. I saw this below code in your init_gpio() function

NRF_GPIO->PIN_CNF[6] = (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos);

This is wrong as you are setting every other bits to '0' and only setting the drive strength. With this the pin will be configured as input. To do this correctly, you need to do this below

NRF_GPIO->PIN_CNF[6] &= ~(GPIO_PIN_CNF_DRIVE_Msk); // reset drive setting
NRF_GPIO->PIN_CNF[6] |= (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos); // set to high drive

you need to do this for pin settings 7 also.

[MARTIN FR]

yes i have debugged my code all the initialization part is getting executed but button press event is not getting executed and also it is not sensing the button is pressed so there is some issue in the button press event handler and button initalization can you please tell me where can i check the #define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 this value because nowhere am seeing this part in my program