button exmaple is not working in SDK version 9.0.0

[MARTIN FR]

Hello evryone,

i cloned button example form github to sdk version 9.0.0 and i modified the neccesary changes between app.gpiote.c//nrf_drv_gpiote.c files and set the GPIOTE ENABLED to 0 after that it is getting compiled with no errors but the baord shows nothing if the press any of the button can anyone suggest me what modifications has to be done or any changes?

ble_app_template.zip

Thank you

prabhu

[Susheel Nuguru]

Hi prabhudurai,

still havent gone through your code, but had a quick look. I saw this below code in your init_gpio() function

NRF_GPIO->PIN_CNF[6] = (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos);

This is wrong as you are setting every other bits to '0' and only setting the drive strength. With this the pin will be configured as input. To do this correctly, you need to do this below

NRF_GPIO->PIN_CNF[6] &= ~(GPIO_PIN_CNF_DRIVE_Msk); // reset drive setting
NRF_GPIO->PIN_CNF[6] |= (GPIO_PIN_CNF_DRIVE_H0D1 << GPIO_PIN_CNF_DRIVE_Pos); // set to high drive

you need to do this for pin settings 7 also.

[MARTIN FR]

hello aryan thanks for your reply acually am using the same button for three purposes first press the button for 3 sec then it will turn on pwm and then if i press the press the button for 5seconds it will trun off the pwm and moreover if i press the button between three and five seconds it has to send notifcation to the central(android phone about the button pressed state) so inorder to achieve this am usign the same button i did not cut of the code but am ttrying to develp the code with your help aryan