I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
If I enable the zephyr shell inside my project with the following config; I'm not able to see anything on the UART If I have CONFIG_SERIAL=y in the SPM prj.conf, If i disable...
hello:
I am using ble_central\ble_app_blinky_c example and attempt to be a central scanner to scan and connect to many BLE peripheral nodes.
The name of target BLE peripheral...
Hello.
We are running an application without BLE at this stage. We measure about 20ma at run time also by the datasheet max is 6ma.
We were thinking that because we don...
Hello All,
I purchased nrf9160 DK board for sending text message using AT Commands. I programmed the SIP to accept AT Commands. Using the LTE monitor app, I tried to initialize...
Why Nordic doesn’t consider update of already 5 years old nAN-36 Creating Bluetooth Low Energy Applications Using nRF51822 ?
It is the most meaningful tutorial for starters...
I recently obtained a PPK from Mouser and plugged it in my nRF52DK. I use it to measure current of an external device.
When NRFConnect "connects", it works great. However...
Hi,
I'm using the latest release of software V1.0.0 with the nRF9160 DK and today started flashing the examples.
at_client worked fine (just tried flashing it once, but...
Hello once again Nordic World,
We are preparing code for production, and one of the last issues to resolve is how to "uniquely" connect our ble_app_uart peripheral based...
Hello,
I'm working on NRF52832,using SDK16 Segger Embedded Studio
now the thing when upload APP_NOTIFICATION it works and also discoverable.
but when upload APP_UART...
Hello.
I just found here: https://nordicsemiconductor.github.io/Nordic-Thingy52-FW/documentation/firmware_architecture.html
something like this:
"To turn on sensor...
I am trying to trigger my target device (nRF52832) into DFU mode using nRF52832 DK.
According to my approach, I need to send DFU bootloader given in "installed folder:\examples...
Hi,
I am a hardware and software embedded developer. I used to SKY369 based on NRF52832 in our bluetooth project, i use softdevice S132 firmware. I can programming with...
Hi All.
SDK15.3.0 / DK / nRF52840
I've been testing DFU on nRF52840 with DK.
When i tested it on nRF52832 all works fine. i followed this ( https://devzone.nordicsemi...
Hi,
Is anybody tried to implement GPFS on NRF52? https://developers.google.com/nearby/fast-pair/spec In general, everything looks clear, but want to save time on development...
