Hi,
I am using ADC without external reference and no analog input in order to measure the battery level with a timer (code at the end).
I am also reading several ports...
Hi,
I'm programming the nRF51822 and save some user data into the FLASH by using pstorage_update . It works fine if I set system off mode, and wake it up. I can read back...
Hi,
I have been using nRF51822 with my Android app using Android's Bluetooth Low-Energy APIs.
In order to get more details, I am currently working on integrating the Android...
I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
hello,When the device's pairing record is lost, the phone's is in.stack report PM_CONN_SEC_ERROR_PIN_OR_KEY_MISSING What should I do? NEF52832,SDK15.2.0,S132
I am trying to use the Zigbee SDK to develop a device to connect to older legacy ZigBee HA coordinators. To do this, I need to use the zb_ha_ez_mode functions detailed in...
Hi, we are evaluating possibly using OTS in our product. We are currently on SDK 15.3.0 and when I look at the documentation:
https://infocenter.nordicsemi.com/topic/com...
Hello,
I really need your help with my problem.
I have a sparkfun nrf52840 mini which is the peripheral, using the code ble_app_uart, and a smartphone with a custom...
I'm compiliing against version 1.1.0 of the ncs, and my device have the mfw 1.1.0 firmware running.
When starting the device, I get the following output:
This is not...
Hello,
I am using nRF52840, SDK_16.0.0, S140 SoftDevice and Segger 4.16 for flashing the image. I am using ‘ble_app_blinky’.
I am new to DFU feature on Nordic. I have...
I have custom board with nrf 52832. I am using SDK 15.2.0. and soft devices s132 V6.1.0 to transmit advertising packets with advertising interval 1s. I have written simple...
Hello :)
After upgrading the modem firmware of the nRF9160 to version 1.1.0 (mfw_nrf9160_1.1.0.zip) the call to getaddrinfo returns error 12.
If I downgrade to version...
Hello, everyone~
A new requirement is generated from my customer. He wants the ANCS can transmit more than 20m in a house. So I want to know if BLE 5.0 long range can transmit...
Hello!
I am dealing with nrf52832. I want to process data reception with SPI during f_write processing. Is this possible? As multi-thread processing 1) PT_THREAD in pt...
I'm developing a wearable device using nRF52832. I am developing OTA-DFU nowadays. I have successfully tested the buttonless OTA-DFU using the nRF52-DK.
And I'm testing...
Hi, I have a nRF9160 and I am currently working with the gps example: ncs\nrf\samples\nrf9160\gps
When I run the example, I only see
all the time. I went out on a big...
Hello,
i am struggling with the implementation of i2s to use it one SK6812 Leds.
To start with i used this https://github.com/cheehieu/nrf52-sk6812-led-driver example...
Hi All,
I study this post to enable long-range(s=8) on ble_app_blinky ( nRF5_SDK_16.0.0_98a08e2\examples\ble_peripheral\ble_app_blinky )
In the post, one of the settings...
Hello,
I was able to program the mesh experimental dimming example(server) into the external nRF52832 module using the debug out pins on the nRF52 DK.
The programming...
