Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Different examples for s110 use different methods to configure advertising, sd_ble_gap_adv_start() and ble_advertising_init(). What is the guidance for choosing between the...
Hello,
I'm looking to get the nRF24LU1+ dongle to work as a VCP. I had a code running 4 years ago on the dongle as a Mass Storage device but I was wondering if someone...
Hi guys,
I have to port the current library that is working at the arduino uno for arduino zero pro but when I change the board type I get the following errors:
__file__...
Hi
Here's what I would like to do: I have a bluetooth device with an nrf51822, with which I gather some sensor data, with a period of say 1 minute. I would like to store...
Hi,
If the bootloader is allocated 16 kB of flash, can it be upgraded Over-The-Air to a larger size bootloader at a later point, or does that require flashing the device...
I am a beginner and I am trying to generate a data ready event and after that reading the FIFO_Count but FIFO_Count gives me the value 1024 that is the maximum possible size...
Hello,
We are in interaction design in a school in France and we must create a connected object. We bought a BLUETOOTH SMART BEACON KIT (nRF51822) and we would know what...
I used nrf51822_narrow module DT26.
softdevice : s110
application: ble_app_hids_mouse
sdk: nrf51_sdk_v6_1_0
Now , we are able to move the cursor with the mouse of the...
Hi,
In the nRF51-ble-bcast-mesh example, it is mentioned that "handle_count" refers to "The maximum number of handle-value pairs available to the application. May not be...
With reference to the IoT SDK for nrf51, I see the APIs and examples of either server or client.
In order to create mesh or peer-to-peer, which API should I use? Or do...
In the description of nRF51-ble-bcast-mesh, there is mentioned that there could be up to 155 mesh values:
There may be up to 155 "Mesh value" characteristics in the mesh...
Hi,
I'm wondering why I can't see any packet from example led_mesh in your's sniffer?
Theoretically it's only Nonconnectable Advertisements or I miss some information...
What will be the price of nrf52 chips compared to nrf51?
Will there be any cheaper version of nrf52 chips with limited capacbilities (e.g. less flash, ram)?
