GOAL: To send one 20-byte data packet from an Android Galaxy S5 to nrf51822 and send three 20-byte packets from the nrf51822 to the S5 in a single connection interval of 10...
Hello, I have looked into the compatibility matrix and I couldn't find any clear answer about if the NRF Beacon Kit is compatible or not with the S130. Does anyone tried to...
hi:
now.i have a development board(nrfgo motherboard).there is a debug port on the board.i think it can be debugged on the keil.if it can.what driver or others i need.thank...
This is what I got after upgrading my nRF51 dongle firmware.
It always times out.
I didn't somehow got one of my J-Link Lite upgraded, but couldn't repeat the process...
Hi all,
Good day.
Could you please recommend an Android or IOS APP which can connect 8 or more BLE peripherals at the same time.
Thanks & Regards
Jenson
I know that suggested debugger for nRF51xxx is J-Link or openOCD with CMSIS-DAP, but I would like to use BDI3000 debugger, which does support SWD interface and Cortex-M0 processors...
Hi Nordic,
For battery_level measurement on the SDK we are using a timer such that for every 5 seconds or 10 seconds if the timer expires then the saadc will be triggered...
Hi!
I use nRF Connect Bluetooth Low Energy application for scanning. There are not all BLE devices on the device list.
The device that is not displayed on the list send...
It is required to track/locate the position of a bluetooth mesh node. I found that RSSI value can be used to estimate the distance between receiver node and a target node...
I am experimenting with the Ebyte E73 module which is just a nRF52832 chip combined with capacitors, resistors and xtals. I also have the J-Link lite cortexM programmer. ...
Hi I'm using nRF5 SDK for mesh. with DK PCA10040.
I want to read the temperature sensor reading on button press. Please give me guidelines on implementing this.
Thank...
Hello, i am testing the mesh SDK 2.2.0 version, whit the Light switch proxy server and proxy client examples.
I made a network whit 3 servers, those configured with the...
Hi all,
Is it possible to connect an external antenna with better gain to nRF52840 dongle (pca10059) in order to improve the range?
Thank you,
- Manuel Montenegro.
On SDK 15.2, all example have issues with all IDE on all NRF_LOG_INFO or NRF_LOG_DEBUG statements. Its an Eclipse issue as everything still compiles fine. But I can't track...
HI
I used the sniffer to get the packes of the connect, but I have some problem. As the Fingure indicats, The master set the Interval to 10ms, but the Packet Says the Interval...
Hello,
I have 2 nRF52840 Dongles. I am trying to use one to transmit 2.4GHz wireless signal and the other to recieve wireless signal and read the connection strength ...
When I call APP_UART_FIFO_INIT(), receive and transmit some data, then call app_uart_close(), I have 3.7µA sleep current. If I don't call the uart init and close function...
Hyvää päivää,
I'm moving from Eclipse to SES which on the face of it seems smoother and cleaner. My problem is figuring out how to setup my projects. If what I want can...
