Hi There,
I am using a nRF52840DK board to experiment with NFC Tag technology.
I started with the "Writable_ndef" example inside the nRFConnect, and it works.
I wrote...
Where can I obtain the security certificates (e.g., client certificate/private key) needed for TLS authentication with nRF Cloud? - Are these generated during device onboarding...
I plan to use my own SIM card (not from Ibasis). Could you clarify how to register the device in nRF Cloud to enable A-GPS services? - Should I link the device’s IMEI or ICCID...
Hello, I am developing nRF5340, the project is pre-production. I am getting a issue with BLE power consumption, when I turned BLE on, the current is about 9uA. with BLE beacon...
Hi ,
1.In the example: In nRF5_SDK_17.1.0_ddde560_usbd_msc_1\components\libraries\block_dev\qspi\nrf_block_dev_qspi.c, I need to set the following 0xB7 bytes. How should...
HI ALL,
nrf54l15dk,v2.8.0,peripheral_uart demo and no changes have been made.
Then add the following content to prj.conf
sysbuild.conf
mcuboot.conf
At this...
Hello!
I'm currently working with the nRF7002 Wi-Fi chip on a custom board. The MCU used is STM32H573ZIT6, and the software is Zephyr 4.0, specifically using the Wi-Fi shell...
I am evaluating the nRF52840-DK dev kit and want to to make changes to the 'LIGHT_SWITCH' application so I understand better how this is achieved. I have some demo code, but...
Hi
We are developing a custom board with nRF52840 and nRF9160. The 9160 is running a modified version of serial_LTE_modem, whereas the 52840 is running the main application...
On a custom pcb, an I2C sensor is connected on P0_15 and P0_16 ( SDA & SCL ).
When sensor reading is requested, the code is designed to wait till the reading is returned...
I am building an app that includes background DFU in the app. My app is based on the freertos example.
I am having problems during nrf_dfu_settings_write due to the checks...
Hi,
we are developing NB-IOT based GPS tracker based on nRF9160.
we have implemented the A-GPS based on SUPL. After using A-GPS there is a minor improvement in the overall...
Hi,
When I first start the modem and connect to NW. XMONITOR AT command shows data like this:
%XMONITOR: 5,"","","24412","C739",9,20,"0017E878",4,6154,71,40,"","11100000...
Dear
I am developing my BT Mesh project of nrf52 by Segger Embedded Studio.
But I can not add CVS function and can not make the dependencies files display. I ask Segger...
Hello, we have developed an BLE application based on the ble_peripheral/ble_app_uart example on an nRF52-DK dev kit with an nrf52832. It works great.
On our production board...
Hello support, for the intergration of the thingy 52 i need to Register with mac adress.
First you need to have the right application running on your Android device ("Nordic...
I just brute force changed to "AWS_IOT", having the keys , and other config already in place after having tried the cloud sample code successfully against AWS
main.c
line...
During BLE startup call to nrf_sdh_enable_request(), nrf_atfifo_item_alloc fails and returns NULL causing a hard fault.
This sounds like an sdk_config.h problem but I don...
Dear all,
I have 10000 devices and I need to put a different value for every device, but I do not want to create 10000 firmware.
Is possible to do that with a tool? I...
Thanks for the reply. I can program my custom PCB from the nrf52 but I can't program the on-board nrf52832. It is always looking for Jlink to an external board. What tells...
I would like to modify the way the SPM is built, specifically by setting CONFIG_BOOT_BANNER=n but do not want to modify any files under the ncs directory. I tried the solution...
I have a multi peripheral sample I am trying to make work
I do a
BLE_NUS_DEF(m_nus) and BLE_HRS_DEF(m_hrs)
this will register two event handlers.
When an event occurs...
