I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I have and older board which is the PCA10028 with the nRF51422 chip.
I have downloaded the nRF5 SKD 15.0.0 and found there is not example DFU project for my particular board...
Hello
I am working on a project based on the Mesh SDK 2.0.1 light_switch example. The system is using SD 6.0.0 and PCA10040 boards. DFU is successfully implemented on the...
Hi,
I work on nrf52832 with the serialization.
The nrf52832 connectivity part is load with S132 V6.0.0 (uart hci).
The stm32 will communicate with the 52832 throught...
Hello, can you say me:
1) which Stack parts in Mesh SDK: nrf5_SDK_for_Mesh_v2.0.1 are implemented in harmony with Bluetooth Mesh Profile Specification and which are not...
Hi,
We are attempting to send data via BLE every 100 ms using an app_timer. The app_timer sets a flag and in the while loop in main.c we call
ret_code_t err_code; do ...
Hello, i'm currently doing my own DFU central for the BLE DFU on SDK 13, i followed all the steps on this link , i created the init and image files with nrfutil and now i...
I am trying to connect my Ubuntu machine with my nrf52 custom board my setup is as follows, Ubuntu machine --> FTDI USB2UART --> HCI interface of nrf52 I can see on my logic...
My application (nRF51 S130 v2.0.1 SDK12.3.0) uses the Radio Timeslot feature for multiprotocol support similarly to the example in https://github.com/NordicPlayground/nrf51...
am trying to synchronize two nrf52840 thank's to state gpio with gpiote function but it return an error code 4 (No Memory for operation) whith this line -> NRF_LOG_INFO("no...
Hi Nordic Team,
What I want to achieve is to add a service with a custom 128-bit UUID that has about 4 characteristics with a completely different 128-bit UUIDs that are...
Hi Nordic,
I'm using NRF52832 to design a producation that needs four SPI interfaces.
The four spi peripherals are: gSensor, LCD, SPI Nor Flash, and PPG Sensor. Now...
Hi,
I'm working on a custom board with the nrf52840 engineering version n52840QIAABB with de SDK15. I've tried the exemple usbd_ble_uart from the SDK15 and it works well...
Figure 1. Data encoded and sent (attached)
Figure 2. Screen shot of wrong Time data (attached)
Here is some code that seems to be correct, sending 10 bytes that look...
Hi ,
I want to know how to give passkey to nrf8001 peripheral mode if it dont have display/keyboard/button, I have hear about justworks but not sure how it will work. Could...
Hello,
I am was playing around a bit with the twi_scanner-example and I figured out, that no matter if I chose the legacy-layer with nrf_drv_twi-functions or the new nrfx_twi...
