Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
Hi all,
I am using ble open mesh with pca10028 boards ble mesh is working fine.
I am developing a application that has to blink led in mesh( without any delay between...
To conserve battery power, my Beacon application powers an attached sensor off GPIO pin 24. That way, when the sensor isn't needed I simply call nrf_drv_gpiote_out_clear(24...
Is there any ready-made example that would show how to configure nRF52 to make analog-to-digital conversions automatically on the background, without CPU intervention between...
I have an application that currently does not use the soft device, but I want to use the dfu bootloader. The application runs fine if only the soft device is present, but...
I'm trying to use the ble_app_hrs_s132_with_dfu_pca10040 example project with my PCA10040 nRF52 DK.
Using Keil uVision 5, I'm able to compile the project and flash to the...
Hello!
When two devices, Peripheral/Server and Central/Client, try to send Notifications and Write Commands, respectively, to each other at the maximum capable rate, who...
Hi Nordic's community,
I have a "stupid" question; i search a programmer for programming a nrf51822 module, and i see everywhere : " flash SD + BL + DFU"... i know Sd ...
hi.
i use nrf51422 v2 that its sdk is version 6 that it did not have any uart over ble example .
if someone had it please give me its link .
thank you .
I'm implement some feature to update the softdevice for nrf51822. It has chance to switch s110 to s130. I have a requirement to treat the MBR of s110 and s130 the same as...
Is there any User Guide for the nrf52832?
TI has the Wiki (including the User's Guide) and the Developer's Guide:
processors.wiki.ti.com/.../CC2650_SensorTag_User's_Guide...
I have two questions related to DMA in the nRF52832
Would you please let me know if there is an example of using DMA with the SAADC?
Is it possible to use...
I'm new in development for BlueTooth. So, please, can anybody tell me, what i need for developing simple application.
I need BlueTooth connection with Android phone and iPhone...
Hi,
I'm working from ble_lbs example to extend it for more services. But if I call sd_ble_uuid_vs_add() more times (first it's called in ble_lbs_init() and second time it...
I buy NRF51822 eval-kit.
BLE dongle and did not have a compatible, The attempt to change the Stack.
But I never found the Gazelle stack.
where are gazell stack?
Hi,
Can someone tell wether Security Mode 1, Level 4 is available on the nRF52832 and SoftDevice S132?
In one PDF I found only Level 1,2 & 3 but in the S132 API reference...
