Hello team,
We have a problem here, we are running a new program with 5 years long-term standby IOT device, once we are trying to use SMS to configure the IOT device we...
In our development using NCS-2.6.1 it is desirable to have logs using BT NUS.
"Serial Bluetooth Terminal" android application is used.
For testing purposes NCS\v3.0.2...
Hello,
I'm trying to hold the TX line of UART0 low for 1 second. I'm using NCS 2.9.0 on an nRF5340.
Disabling UART and setting the pin directly works.
But after reenabling...
Hi,
I want to port an exisiting solution from ESP32 + nrf24 to nrf54L15. I didn't find any example that would work out of the box for my POC which would to combine very...
Hello,
I am working on a hardware design with two MEMS PDM microphones and a mono speaker. I think I have the peripherals allocated and wired correctly but wanted to run...
Hi I'm having the exact same issue found in this post:
I've only just started evaluating the board and haven't gone as far into measurements as that poster, but something...
I'm in the process of upgrading one of our applications from NCS 2.6.1 to 3.0.1. According to this document, the only versions of NCS that support modem firmware 2.0.1 and...
hi:
now.i have a development board(nrfgo motherboard).there is a debug port on the board.i think it can be debugged on the keil.if it can.what driver or others i need.thank...
Hello everyone,
Please forgive my continued naive questions. This is my first embedded-systems project.
I have been working with an nRF52 development board and SDK 0...
I've used the very well written IOT examples with no problem on a R PI, Ubuntu PC, and BBB all with 3.18 or 3.19 kernels. I've moved to 4.1 and 4.2 kernels and the behavior...
Does Nordic have an example iOS app that gets triggered by the beacon without having the app open?
This is really one of the main needs in beacons applications. Thanks!
Hi, the document nRF6930_Beacon_Ref_Design_UG_v1.1.pdf states:
4.2 nRF Beacon app for Android
The nRF Beacon application is available for download in the Google Play store...
Hi there!
I've successfully built the ble_app_hrs example from SDK 0.9.2 for nRF52 on Mac, using Eclipse and GNU ARM GCC.
When I debug it with JLink, the application...
Hello,
I'm wondering if it is possible to use the Bluetooth without using the scheduler.
Indeed, I'm developping an application which doesn't use Bluetooth up to now,...
Hello,
I am programming nRF51 on Keil. My app uses BLE with softdevice S130, PWM, and I2C communication with two sensors. Also RTT for debugging.
I have already reached...
Hi there!
I use RedBearLabs Nano (nRF51822) for at setup where I've developed BLE code in Arduino to communicate with apps on both iOS and Android.
Now I need to ensure...
Hello,
We recently received an eval kit the the nRF52832, but we were told not to take current measurements with this version. This presents a problem since we are evaluating...
I am using this mbed workthrough, to create a custom GATT Service in C++. However, this code only creates characteristics with UUIDs:
uint16_t percentageUUID = 0xA002;...
This thread mentions having the master read the DFU Revision Characteristic to determine the DFU revision. I've based my DFU and application off the dfu_dual_bank_ble_310_pca10028...
Could you estimate the free space for Application on nRF51 and mRF52, on this case for Homekit with FOTA :
Boot Loadeer with FOTA
Homekit Enable
BLE Software Device...
What are the options to update firmware (Application/Bootloader/Softdevices) for multiple devices built on NRF51x22 ?
Using Master Control Panel could take days programming...
Dear Nordic Team,
I am using HID mouse example code in my nordic dk board.
I can able implemented fallowing logic in my code to do left , right and middle button click...
