Sorry if this is too off topic, I actually don't have any problem with my nrf52840 dongle, but the App I'm communicating with. But maybe someone of you has run into the same...
Hello!
We are planning to purchase an electronic component nrf52840 and produce a finished product on it.
question
1. Will it work immediately on the ZIGBEE 3.0...
Good morning, I have a question about NRF Util. I need to make some changes in souce code of nrfutil for my own needs, but the most recent version, which is provided on Github...
For my application I need a lot of different timers. I dont use a soft device. Its a nRF52 Chip on board.
#define APP_TIMER_OP_QUEUE_SIZE 20
APP_TIMER_INIT(APP_TIMER_PRESCALER...
Experimental Buttonless DFU worked correctly when compiled with keil, but the same example compiled in eclipse by gcc is not switching to bootloader mode. value 0x01 is updated...
Hi There,
Are timers 3 & 4 accessible to the application when using the v3.0 S132 softstack on the NRF52?
Looking at table 4 of S132_SDS_v3.0.pdf they are not listed.
Cheers...
Hi Community, many thanks for reading!
I have built a Breadboardadapter for an ISP1302
Inside
On Breadboard
There is no Groundplane or design rules.
Yes,...
I am using a nrf8001 and the arduino aci library ported to work with my project.
I have started from hello world example.
Connecting to the device from android app, sending...
Hi there.
I am compiling the Nordic MQTT subscriber example (using TLS), and see the following error:
c:\program files (x86)\gnu tools arm embedded\5.4 2016q2\arm...
I have an example app ble_app_cscs_pca10028_s110 and when I add /../../../components/drivers_nrf/nrf_soc_nosd to User Include Directories I get an error NRF_EVT_FLASH_OPERATION_SUCCESS...
So right now i have one characteristic which is writable and it has 8 different fields within it.
If I read it with nrf connect app i get 0B-00-0C-00-0D-00-0E-00-0F-00-10...
Hi all, I'm working on SDK12.1.0, soft device s130_nrf51_2.0.1_softdevice.hex. I need to two 128 bit services for these I increased the vs_uuid_count to 2 but it not advertsing...
Hi All,
Please, I would like to know why when using bootloader on nRF51822 , the app does not start when it is being flashed with a debugger (I'm using the J-Link), however...
Nrf_dfu_settings.c used 1.7k RAM in examples\ble_peripheral\experimental_ble_app_buttonless_dfu project ?can used more less?
Nrf_dfu_settings.c -> nrf_dfu_settings_write...
tr4x_87dB_0xc7_1024_7．5ms_おかしい.psd We are using a transmission scheme where we tag each of our packets with a block number and fire them off using write without acknowledgement...
Hello!
I tried to check the saadc value by using sample that is provided nordic homepage,
and I just found that the saadc values changed when I changed the compare time...
