My attempts to configure the Zephyr device tree to run littlefs on an external SD card have repeatedly resulted in what appears to be the creation of a small littlefs instance...
Greetings!
Briefly summarized: I am trying to generate SPDX files for our project, but I hit some roadblocks while running the west spdx command. I found a way to workaround...
Hello,
I'm trying to make the nrf5340-DK capable of connecting to BLE from multiple devices.
The program is based on: Bluetooth: Bluetooth: Peripheral UART .
I found...
Hi all,
I'm trying to use rtc0 with my custom board build with an nrf9151, but I got a secure fault. I've activated rtc in an overlay file
In my prj.conf
But...
We are implementing a Joiner device using OpenThread on the nRF5340 (with Zephyr, NCS v3.5.99-ncs1-4). After successfully joining the Commissioner's network ("Join success...
I purchased a SIM data from ILIAD and I am trying to connect to network, but the AT command AT+CEREG? : +CEREG: 0,4 instead of 0,5 as I expect.
The lte_lc_connect_async...
In order to reduce power consumption , I configured the RX pin of the serial port with an interrupt , and when the device was asleep , it was woken up by an interrupt , and...
I am trying to use the Zigbee SDK to develop a device to connect to older legacy ZigBee HA coordinators. To do this, I need to use the zb_ha_ez_mode functions detailed in...
Hi, we are evaluating possibly using OTS in our product. We are currently on SDK 15.3.0 and when I look at the documentation:
https://infocenter.nordicsemi.com/topic/com...
Hello,
I really need your help with my problem.
I have a sparkfun nrf52840 mini which is the peripheral, using the code ble_app_uart, and a smartphone with a custom...
I'm compiliing against version 1.1.0 of the ncs, and my device have the mfw 1.1.0 firmware running.
When starting the device, I get the following output:
This is not...
Hello,
I am using nRF52840, SDK_16.0.0, S140 SoftDevice and Segger 4.16 for flashing the image. I am using ‘ble_app_blinky’.
I am new to DFU feature on Nordic. I have...
I have custom board with nrf 52832. I am using SDK 15.2.0. and soft devices s132 V6.1.0 to transmit advertising packets with advertising interval 1s. I have written simple...
Hello :)
After upgrading the modem firmware of the nRF9160 to version 1.1.0 (mfw_nrf9160_1.1.0.zip) the call to getaddrinfo returns error 12.
If I downgrade to version...
Hello, everyone~
A new requirement is generated from my customer. He wants the ANCS can transmit more than 20m in a house. So I want to know if BLE 5.0 long range can transmit...
Hello!
I am dealing with nrf52832. I want to process data reception with SPI during f_write processing. Is this possible? As multi-thread processing 1) PT_THREAD in pt...
I'm developing a wearable device using nRF52832. I am developing OTA-DFU nowadays. I have successfully tested the buttonless OTA-DFU using the nRF52-DK.
And I'm testing...
Hi, I have a nRF9160 and I am currently working with the gps example: ncs\nrf\samples\nrf9160\gps
When I run the example, I only see
all the time. I went out on a big...
Hello,
i am struggling with the implementation of i2s to use it one SK6812 Leds.
To start with i used this https://github.com/cheehieu/nrf52-sk6812-led-driver example...
Hi All,
I study this post to enable long-range(s=8) on ble_app_blinky ( nRF5_SDK_16.0.0_98a08e2\examples\ble_peripheral\ble_app_blinky )
In the post, one of the settings...
Hello,
I was able to program the mesh experimental dimming example(server) into the external nRF52832 module using the debug out pins on the nRF52 DK.
The programming...
Hi,, I'm trying to set a recv timeout on a UDP socket (coap) using setsockopt() and getting an EPERM error. I've tried the setsockopt() call both before and after the (successful...
