Has anyone converted the app note AN34 DTM Python script to C# or C/C++ ?
The Python DTM script is works OK with the setup specified in the app note AN34 figure 2, which...
Hi,
I have a serious problem, when I use uart of NRF51822 QFAAC0 to receive data from another MCU, I found that it will lost one bit at same position everytime. my SDK is...
Hi,
I just started to interface the lcd display with nrf51822 evaluation board. The display i'm using is, spi compatible, 18" tft (160x130) from tiny lcd. I took spi master...
Hi,
We are using the nRF905 device in an application where it needs to switch between auto-retransmitting and sending single packets, due to it communicating with several...
This is not a real question for support. It's more a success story i'd like to share with you!
Our company develops firmware for various customers on a lot of different...
Hi all,
What is the maximum data rate for the nRF24AP2 when using the Synchronous serial interface?
I cann't see it in the datasheet.
Is there anyone can answer me...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
Hi All,
I'm using ble_app_uart Application to send some notifications from Peripheral to central device. I'm using API ble_send_string() to send notifications to other...
I have an iOS app which is a central to a peripheral running on an nRF51822. A similar Android app works fine and is able to connect to the peripheral, discover services,...
I couldn't find anything with the search here or google so I felt free to ask.. maybe someone already updated to Windows 10 and can tell if everything works well?
Hi ,
I am trying to advertise HID Keyboard Example forever untill the device is powered off
Please let me know how to do this and also how to power optimise.
Kind...
Can I calculated elapsed time from one event using TIMER1?
If yes,how?I can not find none register which one to read for get counter value(how many ticks have passed since...
Hello, I follow
this page to start the rpi2 for 6lowpan.
when I tried to run RADVD Daemon as follow:
Set IPv6 forwarding (must be present).
sudo echo 1 > /proc...
Hello!
I recently purchased a RedBearLab nRF51822 board where I want to use several DS1820 temperature sensors.
For dealing with the OneWire (1-wire) protocol I found...
Hello,
I'm not sure if this was already asked before. I didn’t found a similar question, so here it is: When I have a function that manipulates a data structure to communicate...
