Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello everyone,
Please forgive my continued naive questions. This is my first embedded-systems project.
I have been working with an nRF52 development board and SDK 0...
I've used the very well written IOT examples with no problem on a R PI, Ubuntu PC, and BBB all with 3.18 or 3.19 kernels. I've moved to 4.1 and 4.2 kernels and the behavior...
Does Nordic have an example iOS app that gets triggered by the beacon without having the app open?
This is really one of the main needs in beacons applications. Thanks!
Hi, the document nRF6930_Beacon_Ref_Design_UG_v1.1.pdf states:
4.2 nRF Beacon app for Android
The nRF Beacon application is available for download in the Google Play store...
Hi there!
I've successfully built the ble_app_hrs example from SDK 0.9.2 for nRF52 on Mac, using Eclipse and GNU ARM GCC.
When I debug it with JLink, the application...
Hello,
I'm wondering if it is possible to use the Bluetooth without using the scheduler.
Indeed, I'm developping an application which doesn't use Bluetooth up to now,...
Hello,
I am programming nRF51 on Keil. My app uses BLE with softdevice S130, PWM, and I2C communication with two sensors. Also RTT for debugging.
I have already reached...
Hi there!
I use RedBearLabs Nano (nRF51822) for at setup where I've developed BLE code in Arduino to communicate with apps on both iOS and Android.
Now I need to ensure...
Hello,
We recently received an eval kit the the nRF52832, but we were told not to take current measurements with this version. This presents a problem since we are evaluating...
I am using this mbed workthrough, to create a custom GATT Service in C++. However, this code only creates characteristics with UUIDs:
uint16_t percentageUUID = 0xA002;...
This thread mentions having the master read the DFU Revision Characteristic to determine the DFU revision. I've based my DFU and application off the dfu_dual_bank_ble_310_pca10028...
Could you estimate the free space for Application on nRF51 and mRF52, on this case for Homekit with FOTA :
Boot Loadeer with FOTA
Homekit Enable
BLE Software Device...
What are the options to update firmware (Application/Bootloader/Softdevices) for multiple devices built on NRF51x22 ?
Using Master Control Panel could take days programming...
Dear Nordic Team,
I am using HID mouse example code in my nordic dk board.
I can able implemented fallowing logic in my code to do left , right and middle button click...
Hi,
I am using nRF51422 with SDK 9.0 and SoftDevice130 with nus service. I have a custom android app running on BLE uart service. Data communication and connection handling...
